在 2013年8月12日星期一UTC+8下午9时20分39秒，Dhyan写道： > Dear An, > > > > I just tried with the Kernel Thomas Suggested, Detailed Steps as follows > > > > > > $ git clone https://github.com/mozilla-b2g/kernel-omap > > $ cd kernel-omap/ > > $ export > PATH=$PATH:<PATH_TO_UR_B2G>/B2G/prebuilt/linux-x86/toolchain/arm-eabi-4.4.3/bin/ > > $ export ARCH=arm > > $ export SUB_ARCH=arm > > $ export CROSS_COMPILE=arm-eabi- > > $ make panda_defconfig > > $ make > > $ cp arch/arm/boot/zImage <PATH_TO_UR_B2G>/B2G/device/ti/panda/kernel > > $ build.sh > > > > > > <Result> :) > > > > 130|shell@android:/ $ dmesg | grep Linux > > <5>[ 0.000000] Linux version 3.0.8-g42f8be0 (ubuntu@ubuntu) (gcc version > 4.4.3 (GCC) ) #1 SMP PREEMPT Mon Aug 12 15:44:20 IST > > > > Thanks > > Dhyan > > On Monday, August 12, 2013 1:49:31 PM UTC+5:30, Thomas Zimmermann wrote: > > > Hi An, > > > > > > > > > > > > The official repository for our PandaBoard kernel is at > > > > > > > > > > > > https://github.com/mozilla-b2g/kernel-omap > > > > > > > > > > > > Branch 'current' should contain the source code for the current kernel. > > > > > > Maybe this helps. > > > > > > > > > > > > Best regards > > > > > > Thomas > > > > > > > > > > > > > > > > > > On 12.08.2013 04:31, [email protected] wrote: > > > > > > > 在 2013年4月17日星期三UTC+8下午10时03分55秒，Dhyan写道： > > > > > > >> Dear all , > > > > > > >> > > > > > > >> > > > > > > >> > > > > > > >> I cloned the B2G source code and ported it to Pandaboard with the help > > >> of Mozilla docs.Now i am trying to replace the Pre-built kernel with my > > >> own compiled kernel,for that i followed below steps > > > > > > >> > > > > > > >> > > > > > > >> > > > > > > >> 1.Cloned the kernel source from > > >> https://github.com/tdz/android-kernel-omap.git, > > > > > > >> > > > > > > >> > > > > > > >> > > > > > > >> 2.Cross compiled it with arm-linux-gnueabi-gcc and panda_defconfig > > > > > > >> > > > > > > >> > > > > > > >> > > > > > > >> 3.Replaced the zImage in device/ti/panda/kernel with new image and done > > >> a fresh B2G built > > > > > > >> > > > > > > >> > > > > > > >> > > > > > > >> Then flashed the new imageand tried booting,But system is hanging in > > > > > > >> > > > > > > >> > > > > > > >> > > > > > > >> "Starting kernel ... > > > > > > >> > > > > > > >> > > > > > > >> > > > > > > >> Uncompressing Linux... done, booting the kernel" > > > > > > >> > > > > > > >> > > > > > > >> > > > > > > >> Sorry for my ignorance,Is it the rite steps or i am doing something > > >> wrong? > > > > > > >> > > > > > > >> > > > > > > >> > > > > > > >> Can some one please guide on this ?? > > > > > > >> > > > > > > >> > > > > > > >> > > > > > > >> Thanks in advance > > > > > > >> > > > > > > >> Dhyan > > > > > > > hi Dhyan > > > > > > > > > > > > > > > > > > > > > > > > > > > > i followed your tips on this page,but i still can't work it out > > > because > > > > > > > > > > > > > > of the same problem.do you mind giving me a more detailed procedure about > > > it > > > > > > > > > > > > > > thanks in advance > > > > > > > > > > > > > > Zhemin An > > > > > > > 发帖 > > > > > > > _______________________________________________ > > > > > > > dev-b2g mailing list > > > > > > > [email protected] > > > > > > > https://lists.mozilla.org/listinfo/dev-b2g
thanks Thomas & Dhyan, it helps me a lot! _______________________________________________ dev-b2g mailing list [email protected] https://lists.mozilla.org/listinfo/dev-b2g
