Hello. I have followed all steps suggested on B2G build tutorial so get FxOS 1.1 on my zte open, but just on last step (flashing) i get serious problems. Before get reply, i need show all details on process i have performed:
1. I have zte open Movistar for Venezuela 2. I have rooted and installed CWM successfully on zte open, using URL: http://pof.eslack.org/2013/07/05/zte-open-firefoxos-phone-root-and-first-impressions/ 3. Build process end successfully, then last step is ./flash.sh then i got: erasing ‘cache’… OKAY [ 0.525s] finished. total time: 0.525s erasing ‘userdata’… OKAY [ 1.388s] finished. total time: 1.388s sending ‘userdata’ (55695 KB)… OKAY [ 5.130s] writing ‘userdata’… FAILED (status read failed (No such device)) finished. total time: 10.490s 4. Obviously, phone become a recoverable brick, then using CWM restore, get phone with stock ROM again. 5. Because flash process do not work, then i pushed system.img and userdata.img to internal sdcard. Restarted phone on CWM and via CWM shell used flash_image on system and userdata. Again phone become a recoverable brick 6. Building process do not generate boot.img, then i performed steps: 6.a) Extracted boot.img of boot partition 6.b) exploded boot.img using abootimg 6.c) repack a new boot.img using abootimg with zImage, bootimg.cfg, including ramdisk.img generated on build process. 6.d) flashed new boot.img, built system.img and built userdata.img into phone by CWM shell then tried again. Results: again a recoverable phone I'm frustrated :-( Please, I need help from someone who has flashed successfully a production zte open Sorry my bad english Edu _______________________________________________ dev-b2g mailing list [email protected] https://lists.mozilla.org/listinfo/dev-b2g
