Ack, this sounds complicated. I’m not sure how best to communicate this. So the ZTE OPEN eBay devices are ikura, and the other ones are inari, or have I got that wrong? I’ve mainly written the MDN ZTE page from the point of view of the eBay devices, so perhaps I should add a section about non-eBay ZTE devices?
Chris Mills Senior tech writer || Mozilla developer.mozilla.org || MDN [email protected] || @chrisdavidmills On 4 Jan 2014, at 13:58, Robert Kaiser <[email protected]> wrote: > The thing there is that the *config setting* is correct, "inari" there works > for both the actual inari (testing) devices and the ZTE Open (ikura). The > generated builds only work on one of them, though, based on what device your > backed-up /system files come from. > > KaiRo > > > Chris Mills schrieb: >> Hi guys, >> >> Feel free to pass corrections to me to implement, if needed. I wrote the >> current docs as they are because I was told the ZTE Open would work with >> Inari B2G builds. Let me know what is wrong and needs updating. >> >> cheers, >> >> Chris Mills >> Senior tech writer || Mozilla >> developer.mozilla.org || MDN >> [email protected] || @chrisdavidmills >> >> >> >> On 30 Dec 2013, at 07:38, Daniel Roesler <[email protected]> wrote: >> >>> So should the MDN page be changed to the correct config setting? >>> On Dec 29, 2013 4:04 PM, "Robert Kaiser" <[email protected]> wrote: >>> >>>> Daniel Roesler schrieb: >>>> >>>>> On Sun, Dec 29, 2013 at 7:24 AM, Robert Kaiser <[email protected]> wrote: >>>>> >>>>>> 2) To prevent misunderstanding, please do not call them "inari" as that >>>>>> code >>>>>> name is used for a slightly different (testing-only) device on which >>>>>> those >>>>>> builds will not work correctly (just like the builds for the inari do not >>>>>> work correctly on the ZTE Open) as the kernel modules are different. The >>>>>> code name for the ZTE Open is ikura, so that probably makes sense to be >>>>>> used >>>>>> there. >>>>>> >>>>> >>>>> These are technically inari builds, since the command is "./config.sh >>>>> inari". This is the configuration recommended for the ZTE Open in the >>>>> wiki[3]. So, I suppose you could flash these builds to your true inari >>>>> device, but I don't have one of those so cannot confirm if it works. >>>>> >>>> >>>> The "inari" build configuration can be used to generate builds for the >>>> inari (testing device) as well as the ikura (ZTE Open) - but the resulting >>>> build only work on the one whose kernel etc. you used for building. I know >>>> it's confusing, but that's what it is. I ran into the same kind of issues >>>> when trying a build generated for inari on a ZTE Open and found out it does >>>> not work correctly (it boots but e.g. wifi isn't working) - I'm pretty sure >>>> it's the same the other way round. >>>> >>>> KaiRo >>>> _______________________________________________ >>>> dev-b2g mailing list >>>> [email protected] >>>> https://lists.mozilla.org/listinfo/dev-b2g >>>> >>> _______________________________________________ >>> dev-b2g mailing list >>> [email protected] >>> https://lists.mozilla.org/listinfo/dev-b2g >> > > _______________________________________________ > dev-b2g mailing list > [email protected] > https://lists.mozilla.org/listinfo/dev-b2g _______________________________________________ dev-b2g mailing list [email protected] https://lists.mozilla.org/listinfo/dev-b2g
