Hi Thomas,
After a short break, I ready to continue.
I put
$(call inherit-product, device/fsl/imx6/arm2_6dq.mk)
on full_arm2_6dq.mk file and, after the build, finally I have my boot.img
with the next files:
=============
drwxrwx--x 2 jvidal jvidal 4096 Mar 18 16:15 data
-rw-r--r-- 1 jvidal jvidal 151 Mar 18 16:15 default.prop
drwxr-xr-x 2 jvidal jvidal 4096 Mar 18 16:15 dev
-rw-r----- 1 jvidal jvidal 857 Mar 18 16:15 fstab.freescale
-rwxr-x--- 1 jvidal jvidal 109424 Mar 18 16:15 init
-rwxr-x--- 1 jvidal jvidal 777 Mar 18 16:15 init.b2g.rc
-rwxr-x--- 1 jvidal jvidal 2626 Mar 18 16:15 init.freescale.rc
-rwxr-x--- 1 jvidal jvidal 1930 Mar 18 16:15 init.freescale.usb.rc
-rwxr-x--- 1 jvidal jvidal 2487 Mar 18 16:15 init.goldfish.rc
-rwxr-x--- 1 jvidal jvidal 23685 Mar 18 16:15 init.rc
-rwxr-x--- 1 jvidal jvidal 1795 Mar 18 16:15 init.trace.rc
-rwxr-x--- 1 jvidal jvidal 3947 Mar 18 16:15 init.usb.rc
drwxr-xr-x 2 jvidal jvidal 4096 Mar 18 16:15 proc
drwxr-x--- 2 jvidal jvidal 4096 Mar 18 16:15 sbin
drwxr-xr-x 2 jvidal jvidal 4096 Mar 18 16:15 sys
drwxr-xr-x 2 jvidal jvidal 4096 Mar 18 16:15 system
-rw-r--r-- 1 jvidal jvidal 272 Mar 18 16:15 ueventd.goldfish.rc
-rw-r--r-- 1 jvidal jvidal 4024 Mar 18 16:15 ueventd.rc
====================
But, when I turn on my device, I get:
============
kernel @ 10808000 (4744188)
ramdisk @ 11800000 (186420)
kernel cmdline:
use boot.img command line:
console=ttymxc0,115200 init=/init androidboot.console=ttymxc0
androidboot.hardware=freescale var_ts_type=ctw6120
Starting kernel ...
==========
This is not booting.
What is the problem ?
Do you have any idea about how I can to debug ?
Thanks in advance
Regards.
jvidalsm
2014-03-18 5:32 GMT-05:00 Thomas Zimmermann <[email protected]>:
> Hi Jose,
>
> Good to see that you're making progress. :) I don't know in which parts
> of init.rc we really depend, but it's there on the other platforms, so
> it's probably necessary.
>
> On 18.03.2014 11:04, Jose Vidal wrote:
> > Hi Thomas,
> >
> > Ok, I edited my full_arm2_6dq.mk <http://full_arm2_6dq.mk> file. The
> > line that I used is:
> >
> > $(call inherit-product,
> > $(SRC_TARGET_DIR)/product/generic_no_telephony.mk
> > <http://generic_no_telephony.mk>)
>
> If possible, try to build an include chain like in the example of the
> Nexus 4. I don't know what exactly these files add to the build, but
> some of it might be important. Maybe this could also fix the missing
> init.rc.
>
> Best regards
> Thomas
>
> >
> > After the build, the files inside of boot.img are:
> >
> > drwxrwx--x 2 jvidal jvidal 4096 Mar 18 04:45 data
> > -rw-r--r-- 1 jvidal jvidal 151 Mar 18 04:45 default.prop
> > drwxr-xr-x 2 jvidal jvidal 4096 Mar 18 04:45 dev
> > -rw-r----- 1 jvidal jvidal 857 Mar 18 04:45 fstab.freescale
> > -rwxr-x--- 1 jvidal jvidal 109424 Mar 18 04:45 init
> > -rwxr-x--- 1 jvidal jvidal 777 Mar 18 04:45 init.b2g.rc
> > -rwxr-x--- 1 jvidal jvidal 2626 Mar 18 04:45 init.freescale.rc
> > -rwxr-x--- 1 jvidal jvidal 2487 Mar 18 04:45 init.goldfish.rc
> > -rwxr-x--- 1 jvidal jvidal 1795 Mar 18 04:45 init.trace.rc
> > -rwxr-x--- 1 jvidal jvidal 3947 Mar 18 04:45 init.usb.rc
> > drwxr-xr-x 2 jvidal jvidal 4096 Mar 18 04:45 proc
> > drwxr-x--- 2 jvidal jvidal 4096 Mar 18 04:45 sbin
> > drwxr-xr-x 2 jvidal jvidal 4096 Mar 18 04:45 sys
> > drwxr-xr-x 2 jvidal jvidal 4096 Mar 18 04:45 system
> > -rw-r--r-- 1 jvidal jvidal 272 Mar 18 04:45 ueventd.goldfish.rc
> > -rw-r--r-- 1 jvidal jvidal 4024 Mar 18 04:45 ueventd.rc
> >
> >
> > Only I have init.freescale.rc. Is necessary to have init.rc too?
> >
> > Thanks in advance.
> >
> > Best regards.
> >
> >
> > jvidalsm
> >
> >
> > 2014-03-18 4:34 GMT-05:00 Thomas Zimmermann <[email protected]
> > <mailto:[email protected]>>:
> >
> > Hi Jose
> >
> > On 18.03.2014 10:20, Jose Vidal wrote:
> > > Hi Thomas,
> > >
> > > I have the next result:
> > >
> > > ~/B2G$ find . -name "*.mk" -type f | xargs grep -n b2g\.mk
> > >
> > > ./gaia/Android.mk:17:# We will keep this flag in .b2g.mk
> > <http://b2g.mk> <http://b2g.mk>
> > > so |./flash.sh gaia| follows
> > > ./gaia/Android.mk:73:echo $(GAIA_MAKE_FLAGS) >
> > $(GAIA_PATH)/.b2g.mk <http://b2g.mk>
> > > <http://b2g.mk>
> > > ./build/target/product/generic_no_telephony.mk:89:$(call
> > > inherit-product, gonk-misc/b2g.mk <http://b2g.mk> <http://b2g.mk>)
> > >
> > > What it means that ?
> > > I should to edit generic_no_telephony.mk
> > <http://generic_no_telephony.mk>
> > > <http://generic_no_telephony.mk> file and to link to my device or
> I
> > > should to creat a new file?
> >
> > No, you need to make sure that the file is included from within your
> > device directory. For example for the Nexus 4
> >
> > - device/lge/mako/full_mako.mk <http://full_mako.mk> includes
> > - build/target/product/aosp_base.mk <http://aosp_base.mk>, which
> > includes
> > - build/target/product/full_base.mk <http://full_base.mk>, which
> > includes
> > - build/target/product/generic_no_telephony.mk
> > <http://generic_no_telephony.mk>, which includes
> > - gonk-misc/b2g.mk <http://b2g.mk>.
> >
> > I don't know how your device makefile is called (full_arm2_6dq.mk?
> > <http://full_arm2_6dq.mk?>), but
> > it should provide something similar. And it should should override
> some
> > of the PRODUCT_ variables. Just have a look at the other platforms to
> > get an idea of what exactly is required.
> >
> > Best regards
> > Thomas
> >
> >
> > >
> > > In the bottom the generic_no_telephony.mk
> > <http://generic_no_telephony.mk>
> > > <http://generic_no_telephony.mk> file there is:
> > >
> > > # Overrides
> > > PRODUCT_BRAND := generic
> > > PRODUCT_DEVICE := generic
> > > PRODUCT_NAME := generic_no_telephony
> > >
> > >
> > > Thanks in advance
> > >
> > > Regards,
> > >
> > > jvidalsm
> > >
> > >
> > >
> > > 2014-03-18 4:07 GMT-05:00 Thomas Zimmermann
> > <[email protected] <mailto:[email protected]>
> > > <mailto:[email protected] <mailto:[email protected]
> >>>:
> > >
> > > Hi Jose
> > >
> > > On 18.03.2014 09:56, Jose Vidal wrote:
> > > > Hi Thomas,
> > > >
> > > > No, not that happens.
> > > >
> > > > I have actually:
> > > >
> > > > drwxrwx--x 2 jvidal jvidal 4096 Mar 18 03:37 data
> > > > -rw-r--r-- 1 jvidal jvidal 151 Mar 18 03:37 default.prop
> > > > drwxr-xr-x 2 jvidal jvidal 4096 Mar 18 03:37 dev
> > > > -rw-r----- 1 jvidal jvidal 857 Mar 18 03:37
> fstab.freescale
> > > > -rwxr-x--- 1 jvidal jvidal 109424 Mar 18 03:37 init
> > > > -rwxr-x--- 1 jvidal jvidal 2626 Mar 18 03:37
> init.freescale.rc
> > > > -rwxr-x--- 1 jvidal jvidal 2487 Mar 18 03:37
> init.goldfish.rc
> > > > drwxr-xr-x 2 jvidal jvidal 4096 Mar 18 03:37 proc
> > > > drwxr-x--- 2 jvidal jvidal 4096 Mar 18 03:37 sbin
> > > > drwxr-xr-x 2 jvidal jvidal 4096 Mar 18 03:37 sys
> > > > drwxr-xr-x 2 jvidal jvidal 4096 Mar 18 03:37 system
> > > > -rw-r--r-- 1 jvidal jvidal 272 Mar 18 03:37
> > ueventd.goldfish.rc
> > > > -rw-r--r-- 1 jvidal jvidal 4024 Mar 18 03:37 ueventd.rc
> > > >
> > > >
> > > > I should to edit gonk-misc/Android.mk ?
> > >
> > > Actually you shouldn't have to edit any files, except those in
> > > device/<your_device>. For the builds I have on my hard disk,
> > b2g.mk <http://b2g.mk>
> > > <http://b2g.mk> is
> > > included by an .mk file under build/target/product/, like
> > >
> > > find . -name "*.mk" -type f | xargs grep -n b2g\.mk
> > > ./build/target/product/full_base.mk:56:$(call
> inherit-product,
> > > gonk-misc/b2g.mk <http://b2g.mk> <http://b2g.mk>)
> > >
> > > You should check if such a line is present and if the
> > respective file is
> > > included from the *.mk files in your device directory; either
> > directly
> > > or via other files.
> > >
> > > Best regards
> > > Thomas
> > >
> > >
> > > >
> > > > Regards.
> > > >
> > > >
> > > > jvidalsm
> > > >
> > > >
> > > > 2014-03-18 3:48 GMT-05:00 Thomas Zimmermann
> > > <[email protected] <mailto:[email protected]>
> > <mailto:[email protected] <mailto:[email protected]>>
> > > > <mailto:[email protected]
> > <mailto:[email protected]> <mailto:[email protected]
> > <mailto:[email protected]>>>>:
> > > >
> > > > > the dependecies listed in gonk-misc/Android.mk are
> > included.
> > > >
> > > > s/Android.mk/b2g.mk <http://b2g.mk> <http://b2g.mk>
> > <http://b2g.mk>
> > > >
> > > >
> > > > >
> > > > > Best regards
> > > > > Thomas
> > > > >
> > > > > On 18.03.2014 08:39, Jose Vidal wrote:
> > > > >> Hi everyone,
> > > > >>
> > > > >> I have builded the image files:
> > > > >>
> > > > >> boot.img
> > > > >> system.img
> > > > >> userdata.img
> > > > >> recovery.img
> > > > >>
> > > > >> I'm using unmkbootimg to extract the files from
> boot.img.
> > > > >> When I extract the files from my boot.img I don't
> > have the same
> > > > files like boot.img from Hamachi.
> > > > >>
> > > > >> My device is a fsl/arm2_6dq and the files inside the
> > boot.img
> > > > (after the build) are:
> > > > >>
> > > > >> data
> > > > >> dev
> > > > >> proc
> > > > >> sbin
> > > > >> sys
> > > > >> system
> > > > >> init
> > > > >> init.freescale.rc
> > > > >> ueventd.goldfish.rc
> > > > >> default.prop
> > > > >> fstab.freescale
> > > > >> init.goldfish.rc
> > > > >> ueventd.rc
> > > > >>
> > > > >> The files inside the boot.img from Hamachi device
> > (downloaded
> > > > from http://elsimpicuitico.wordpress.com/firefoxos/)
> are:
> > > > >>
> > > > >> boot.ver
> > > > >> dev
> > > > >> proc
> > > > >> sbin
> > > > >> sys
> > > > >> system
> > > > >> init.qcom.class_core.sh
> > <http://init.qcom.class_core.sh> <http://init.qcom.class_core.sh>
> > > <http://init.qcom.class_core.sh>
> > > > >> init.qcom.syspart_fixup.sh
> > <http://init.qcom.syspart_fixup.sh>
> > > <http://init.qcom.syspart_fixup.sh>
> > <http://init.qcom.syspart_fixup.sh>
> > > > >> ueventd.goldfish.rc
> > > > >> charger
> > > > >> init
> > > > >> init.qcom.class_main.sh
> > <http://init.qcom.class_main.sh> <http://init.qcom.class_main.sh>
> > > <http://init.qcom.class_main.sh>
> > > > >> init.qcom.usb.rc
> > > > >> res
> > > > >> ueventd.rc
> > > > >> custpack
> > > > >> init.b2g.rc
> > > > >> init.qcom.early_boot.sh
> > <http://init.qcom.early_boot.sh> <http://init.qcom.early_boot.sh>
> > > <http://init.qcom.early_boot.sh>
> > > > >> init.qcom.usb.sh <http://init.qcom.usb.sh>
> > <http://init.qcom.usb.sh>
> > > <http://init.qcom.usb.sh>
> > > > >> data
> > > > >> init.goldfish.rc
> > > > >> init.qcom.rc
> > > > >> init.rc
> > > > >> default.prop
> > > > >> init.jrd.rc
> > > > >> init.qcom.sh <http://init.qcom.sh>
> > <http://init.qcom.sh> <http://init.qcom.sh>
> > > > >> init.target.rc
> > > > >>
> > > > >>
> > > > >> How I can make to get the init.b2g.rc, init.rc inside
> the
> > > boot.img ?
> > > > >>
> > > > >> I hope for your help.
> > > > >>
> > > > >> Thanks in advance.
> > > > >>
> > > > >>
> > > > >> Best regards
> > > > >>
> > > > >> jvidalsm
> > > > >> _______________________________________________
> > > > >> dev-b2g mailing list
> > > > >> [email protected]
> > <mailto:[email protected]>
> > > <mailto:[email protected]
> > <mailto:[email protected]>>
> > <mailto:[email protected] <mailto:[email protected]>
> > > <mailto:[email protected]
> > <mailto:[email protected]>>>
> > > > >> https://lists.mozilla.org/listinfo/dev-b2g
> > > > >>
> > > > >
> > > > > _______________________________________________
> > > > > dev-b2g mailing list
> > > > > [email protected]
> > <mailto:[email protected]> <mailto:[email protected]
> > <mailto:[email protected]>>
> > > <mailto:[email protected]
> > <mailto:[email protected]> <mailto:[email protected]
> > <mailto:[email protected]>>>
> > > > > https://lists.mozilla.org/listinfo/dev-b2g
> > > > >
> > > >
> > > >
> > > >
> > > >
> > > > --
> > > > Jose Vidal Noblecilla
> > > > Ingeniero Electrónico
> > > > UNMSM
> > > > Lima-Perú
> > > > Cel:994 682 455
> > >
> > >
> > >
> > >
> > > --
> > > Jose Vidal Noblecilla
> > > Ingeniero Electrónico
> > > UNMSM
> > > Lima-Perú
> > > Cel:994 682 455
> >
> >
>
>
_______________________________________________
dev-b2g mailing list
[email protected]
https://lists.mozilla.org/listinfo/dev-b2g
