Hello all.
I'm trying to install firefox os to PandaBoard-ES Rev B3.
But when I executed usbboot, it was suspended as follows.
B2G/device/ti/panda/usbboot B2G/ti/panda/bootloader.bin
[ aboot second-stage loader ]
MSV=00000000
jumping to 0x82000000..
Could anyone solve this problem?
I know there is a difference between Rev.B2 and Rev.B3 regarding memory modules.
And SVTronics distributes Android package for B3.
http://www.svtronics.com/support/pandaboard-es-b3-developers-guide/
So I've also tried to create SD card for booting Firefox using the Android
package.
1) prepare SD card for booting linaro Android (works fine)
2) create uInitrd of B2G and replace it
cp -r B2G/out/target/product/panda/root .
cd root/
find . | cpio -o -H newc | gzip > ../initrd.img.gz
cd ../
mkimage -A arm -O linux -T ramdisk -C none -a 0 -e 0 -n initramfs -d
./initrd.img.gz ./uInitrd
and move to first partition (/deb/sdb1)
3) create system and usrdata
out/host/linux-x86/bin/simg2img out/target/product/panda/system.img
out/target/product/panda/system.ext4.img
out/host/linux-x86/bin/simg2img out/target/product/panda/userdata.img
out/target/product/panda/userdata.ext4.img
dd if=out/target/product/panda/system.ext4.img of=/dev/sdb2
dd if=out/target/product/panda/userdata.ext4.img of=/dev/sdb5
4) insert SD card and boot pandaboard.
Boot logo of ANDROID and mozilla is shown once.
And Android shell seems to be working on serial console.
But display shows black screen...
Below the boot process:
======================================================
U-Boot 2013.01.-rc1-g0f45941 (Mar 25 2014 - 00:25:51)
CPU : OMAP4460 ES1.1
Board: OMAP4 Panda
I2C: ready
DRAM: 1 GiB
MMC: OMAP SD/MMC: 0
Using default environment
In: serial
Out: serial
Err: serial
Net: No ethernet found.
checking for preEnv.txt
reading preEnv.txt
** Unable to read file preEnv.txt **
Hit any key to stop autoboot: 0
mmc0 is current device
reading uEnv.txt
** Unable to read file uEnv.txt **
reading boot.scr
497 bytes read
Loaded script from boot.scr
Running bootscript from mmc0 ...
## Executing script at 82000000
reading uImage
4804488 bytes read
reading uInitrd
207400 bytes read
reading board.dtb
1187 bytes read
## Booting kernel from Legacy Image at 80200000 ...
Image Name: Linux-3.2.0+
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 4804424 Bytes = 4.6 MiB
Load Address: 80008000
Entry Point: 80008000
Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at 81600000 ...
Image Name: initramfs
Image Type: ARM Linux RAMDisk Image (uncompressed)
Data Size: 207336 Bytes = 202.5 KiB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
## Flattened Device Tree blob at 815f0000
Booting using the fdt blob at 0x815f0000
Loading Kernel Image ... OK
OK
reserving fdt memory region: addr=9d000000 size=3000000
Using Device Tree in place at 815f0000, end 815f34a2
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
[ 0.000000] Booting Linux on physical CPU 0
[ 0.000000] Linux version 3.2.0+ (jenkins-build@ip-10-12-113-22) (gcc versio3
[ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instructie
[ 0.000000] Machine: OMAP4 Panda board, model: TI OMAP4 PandaBoard
[ 0.000000] Reserving 50331648 bytes SDRAM for VRAM
[ 0.000000] cma: CMA: reserved 32 MiB at 9a000000
[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
[ 0.000000] OMAP4460 ES1.1
[ 0.000000] PERCPU: Embedded 8 pages/cpu @e0808000 s10432 r8192 d14144 u32768
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pa6
[ 0.000000] Kernel command line: console=ttyO2,115200n8 rootwait ro earlypri
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 456MB 463MB = 919MB total
[ 0.000000] Memory: 888072k/888072k available, 103160k reserved, 211968K higm
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xf0800000 - 0xf8000000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc089aae4 (8779 kB)
[ 0.000000] .init : 0xc089b000 - 0xc08e08c0 ( 279 kB)
[ 0.000000] .data : 0xc08e2000 - 0xc094ba50 ( 423 kB)
[ 0.000000] .bss : 0xc094ba74 - 0xc0af95e8 (1719 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:410
[ 0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz
[ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 1s
[ 0.000000] Console: colour dummy device 80x30
[ 0.000305] Calibrating delay loop... 1392.74 BogoMIPS (lpj=5439488)
[ 0.070343] pid_max: default: 32768 minimum: 301
[ 0.070526] Security Framework initialized
[ 0.070617] Mount-cache hash table entries: 512
[ 0.071472] CPU: Testing write buffer coherency: ok
[ 0.071685] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.071716] Calibrating local timer... 341.54MHz.
[ 0.117401] L310 cache controller enabled
[ 0.117431] l2x0: 16 ways, CACHE_ID 0x410000c7, AUX_CTRL 0x5e470000, Cache sB
[ 0.193939] CPU1: Booted secondary processor
[ 0.224151] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.224182] CPU1: Unknown IPI message 0x1
[ 0.224212] Brought up 2 CPUs
[ 0.224212] SMP: Total of 2 processors activated (2755.07 BogoMIPS).
[ 0.224792] devtmpfs: initialized
[ 0.228027] omap_hwmod: l4_div_ck: missing clockdomain for l4_div_ck.
[ 0.292572] omap_hwmod: ipu: failed to hardreset
[ 0.298004] omap_hwmod: mcpdm: _wait_target_ready: -16
[ 0.298004] ------------[ cut here ]------------
[ 0.298034] WARNING: at /mnt/jenkins/workspace/linaro-android-member-ti_pand)
[ 0.298034] Modules linked in:
[ 0.298095] [<c0019e10>] (unwind_backtrace+0x0/0xf8) from [<c0044b18>] (warn)
[ 0.298095] [<c0044b18>] (warn_slowpath_common+0x4c/0x64) from [<c0044b4c>] )
[ 0.298126] [<c0044b4c>] (warn_slowpath_null+0x1c/0x24) from [<c0022908>] (_)
[ 0.298156] [<c0022908>] (_enable+0x234/0x264) from [<c0022d2c>] (_setup+0xa)
[ 0.298156] [<c0022d2c>] (_setup+0xa0/0x170) from [<c0022f90>] (omap_hwmod_f)
[ 0.298187] [<c0022f90>] (omap_hwmod_for_each+0x30/0x5c) from [<c08a4d34>] ()
[ 0.298217] [<c08a4d34>] (omap_hwmod_setup_all+0x6c/0x98) from [<c000864c>] )
[ 0.298248] [<c000864c>] (do_one_initcall+0x110/0x178) from [<c089b854>] (ke)
[ 0.298248] [<c089b854>] (kernel_init+0x8c/0x12c) from [<c001433c>] (kernel_)
[ 0.298309] ---[ end trace 1b75b31a2719ed1c ]---
[ 0.298309] omap_hwmod: mcpdm: cannot be enabled (3)
[ 0.302307] Enabling ERRATA 751472
[ 0.302337] OMAP4: Map 0xafe00000 to 0xfe600000 for dram barrier
[ 0.303680] print_constraints: dummy:
[ 0.305633] NET: Registered protocol family 16
[ 0.310577] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.310760] GPMC revision 6.0
[ 0.312744] OMAP GPIO hardware version 0.1
[ 0.315307] omap_mux_init: Add partition: #1: core, flags: 2
[ 0.316223] omap_mux_init: Add partition: #2: wkup, flags: 2
[ 0.319488] SRAM: Mapped pa 0x40300000 to va 0xf0840000 size: 0xd000
[ 0.324066] _omap_mux_init_gpio: Could not set gpio7
[ 0.324096] No ATAGs?
[ 0.332611] OMAP DMA hardware revision 0.0
[ 0.357879] bio: create slab <bio-0> at 0
[ 0.358947] print_constraints: vwl1271: 1800 mV
[ 0.360107] i2c-core: driver [twl] using legacy suspend method
[ 0.360107] i2c-core: driver [twl] using legacy resume method
[ 0.360717] SCSI subsystem initialized
[ 0.362609] usbcore: registered new interface driver usbfs
[ 0.362884] usbcore: registered new interface driver hub
[ 0.363067] usbcore: registered new device driver usb
[ 0.376708] omap_i2c omap_i2c.1: bus 1 rev2.4.0 at 400 kHz
[ 0.377685] Skipping twl internal clock init and using bootloader value (unk)
[ 0.378143] twl6030: PIH (irq 39) chaining IRQs 368..387
[ 0.378936] print_constraints: VUSB: 3300 mV normal standby
[ 0.576538] twl6030_usb twl6030_usb: Initialized TWL6030 USB module
[ 0.577484] print_constraints: VMMC: 1200 <--> 3000 mV at 3000 mV normal stay
[ 0.578063] print_constraints: VPP: 1800 <--> 2500 mV at 1900 mV normal stany
[ 0.578613] print_constraints: VUSIM: 1200 <--> 2900 mV at 1800 mV normal sty
[ 0.579223] print_constraints: VCXIO: 1800 mV normal standby
[ 0.579620] print_constraints: VDAC: 1800 mV normal standby
[ 0.580169] print_constraints: VAUX1_6030: 1000 <--> 3000 mV at 2800 mV normy
[ 0.580200] twl_reg twl_reg.37: Failed to set supply vmmc
[ 0.580383] twl_reg twl_reg.37: can't register VAUX1_6030, -16
[ 0.580383] twl_reg: probe of twl_reg.37 failed with error -16
[ 0.580871] print_constraints: VAUX2_6030: 1200 <--> 2800 mV at 1800 mV normy
[ 0.581420] print_constraints: VAUX3_6030: 1000 <--> 3000 mV at 1200 mV normy
[ 0.581817] print_constraints: CLK32KG:
[ 0.582183] print_constraints: VANA: 2100 mV normal standby
[ 0.590148] omap_i2c omap_i2c.2: bus 2 rev2.4.0 at 400 kHz
[ 0.605407] omap_i2c omap_i2c.3: bus 3 rev2.4.0 at 100 kHz
[ 0.620635] omap_i2c omap_i2c.4: bus 4 rev2.4.0 at 400 kHz
[ 0.621673] Advanced Linux Sound Architecture Driver Version 1.0.24.
[ 0.622863] cfg80211: Calling CRDA to update world regulatory domain
[ 0.623931] Switching to clocksource 32k_counter
[ 0.651336] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
[ 0.651916] musb-hdrc musb-hdrc: USB OTG mode controller at fc0ab000 using P4
[ 0.652404] NET: Registered protocol family 2
[ 0.652557] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.653015] TCP established hash table entries: 131072 (order: 8, 1048576 by)
[ 0.655151] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
[ 0.656799] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.656799] TCP reno registered
[ 0.656829] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.656860] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.657135] NET: Registered protocol family 1
[ 0.657440] RPC: Registered named UNIX socket transport module.
[ 0.657470] RPC: Registered udp transport module.
[ 0.657470] RPC: Registered tcp transport module.
[ 0.657470] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.657684] Trying to unpack rootfs image as initramfs...
[ 0.672821] Freeing initrd memory: 200K
[ 0.672821] NetWinder Floating Point Emulator V0.97 (double precision)
[ 1.609130] highmem bounce pool size: 64 pages
[ 1.609527] ashmem: initialized
[ 1.609802] VFS: Disk quotas dquot_6.5.2
[ 1.609924] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.611297] Installing knfsd (copyright (C) 1996 [email protected]).
[ 1.611572] ROMFS MTD (C) 2007 Red Hat, Inc.
[ 1.611633] fuse init (API version 7.17)
[ 1.612365] Btrfs loaded
[ 1.612396] msgmni has been set to 1384
[ 1.613555] Block layer SCSI generic (bsg) driver version 0.4 loaded (major )
[ 1.613586] io scheduler noop registered
[ 1.613586] io scheduler deadline registered
[ 1.613647] io scheduler cfq registered (default)
[ 1.615081] OMAP DSS rev 4.0
[ 1.639495] dsscomp: initializing.
[ 1.639526] misc dsscomp: found 2 displays and 4 overlays
[ 1.639770] could not allocate slot
[ 1.640075] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.093078] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 104) is a OMAP UART0
[ 2.217773] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 105) is a OMAP UART1
[ 2.342773] omap_uart.2: ttyO2 at MMIO 0x48020000 (irq = 106) is a OMAP UART2
[ 3.260498] console [ttyO2] enabled
[ 3.350585] omap_uart.3: ttyO3 at MMIO 0x4806e000 (irq = 102) is a OMAP UART3
[ 3.475830] PVR: PVRCore_Init
[ 3.479248] PVR: PVRSRVDriverProbe(pDevice=efea8e00)
[ 3.484558] PVR: SGX register base: 0x56000000
[ 3.489257] PVR: SGX register size: 65535
[ 3.493499] PVR: SGX IRQ: 53
[ 3.496582] PVR: EnableSystemClocks: Enabling System Clocks
[ 3.502532] omap_sr_disable: omap_sr struct for sr_core not found
[ 3.509002] PVR_K:(Error): EnableSGXClocks: Unable to scale SGX frequency (-]
[ 3.530822] omap_sr_disable: omap_sr struct for sr_core not found
[ 3.537261] PVR_K:(Error): EnableSGXClocks: Unable to scale SGX frequency (-]
[ 3.561798] PVR: PVRCore_Init: major device 251
[ 3.576690] brd: module loaded
[ 3.585205] loop: module loaded
[ 3.588897] Non-trimmed BGAP, Temp not accurate
[ 3.593688] thermal_sensor_dev_register:Need to init the cpu domain
[ 3.606475] usbcore: registered new interface driver asix
[ 3.612365] usbcore: registered new interface driver cdc_ether
[ 3.618743] usbcore: registered new interface driver smsc95xx
[ 3.625000] usbcore: registered new interface driver net1080
[ 3.631103] usbcore: registered new interface driver cdc_subset
[ 3.637512] usbcore: registered new interface driver zaurus
[ 3.643981] cdc_ncm: 04-Aug-2011
[ 3.647583] usbcore: registered new interface driver cdc_ncm
[ 3.653961] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.661041] _regulator_get: ehci-omap.0 supply hsusb0 not found, using dummyr
[ 3.669525] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
[ 3.675903] ehci-omap ehci-omap.0: new USB bus registered, assigned bus numb1
[ 3.684204] ehci-omap ehci-omap.0: irq 109, io mem 0x4a064c00
[ 3.702117] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
[ 3.708251] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.715423] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber1
[ 3.723083] usb usb1: Product: OMAP-EHCI Host Controller
[ 3.728698] usb usb1: Manufacturer: Linux 3.2.0+ ehci_hcd
[ 3.734405] usb usb1: SerialNumber: ehci-omap.0
[ 3.739898] hub 1-0:1.0: USB hub found
[ 3.743865] hub 1-0:1.0: 3 ports detected
[ 3.772583] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.779205] ohci-omap3 ohci-omap3.0: OMAP3 OHCI Host Controller
[ 3.785797] ohci-omap3 ohci-omap3.0: new USB bus registered, assigned bus nu2
[ 3.793975] ohci-omap3 ohci-omap3.0: irq 108, io mem 0x4a064800
[ 3.877929] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.885101] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber1
[ 3.892761] usb usb2: Product: OMAP3 OHCI Host Controller
[ 3.898468] usb usb2: Manufacturer: Linux 3.2.0+ ohci_hcd
[ 3.904174] usb usb2: SerialNumber: ohci-omap3.0
[ 3.909729] hub 2-0:1.0: USB hub found
[ 3.913726] hub 2-0:1.0: 3 ports detected
[ 3.918670] usbcore: registered new interface driver cdc_wdm
[ 3.924682] Initializing USB Mass Storage driver...
[ 3.930053] usbcore: registered new interface driver usb-storage
[ 3.936401] USB Mass Storage support registered.
[ 3.941497] usbcore: registered new interface driver libusual
[ 4.069305] usb 1-1: new high-speed USB device number 2 using ehci-omap
[ 4.225952] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
[ 4.233032] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.241333] hub 1-1:1.0: USB hub found
[ 4.245422] hub 1-1:1.0: 5 ports detected
[ 4.251159] usbcore: registered new interface driver usbtest
[ 4.455657] gadget: Mass Storage Function, version: 2009/09/11
[ 4.461944] gadget: Number of LUNs=1
[ 4.465820] lun0: LUN: removable file: (no medium)
[ 4.471466] gadget: android_usb ready
[ 4.538299] usb 1-1.1: new high-speed USB device number 3 using ehci-omap
[ 4.671203] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[ 4.678466] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumbe0
[ 4.693786] musb-hdrc musb-hdrc: MUSB HDRC host driver
[ 4.699859] musb-hdrc musb-hdrc: new USB bus registered, assigned bus number3
[ 4.707763] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.715026] smsc95xx v1.0.4
[ 4.718048] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber1
[ 4.725921] usb usb3: Product: MUSB HDRC host driver
[ 4.731231] usb usb3: Manufacturer: Linux 3.2.0+ musb-hcd
[ 4.736999] usb usb3: SerialNumber: musb-hdrc
[ 4.742462] hub 3-0:1.0: USB hub found
[ 4.746490] hub 3-0:1.0: 1 port detected
[ 4.788635] mousedev: PS/2 mouse device common for all mice
[ 4.796478] input: twl6040:vibrator as /devices/platform/omap/omap_i2c.1/i2c0
[ 4.807281] _regulator_get: twl6040-vibra supply vddvibl not found, using dur
[ 4.816101] _regulator_get: twl6040-vibra supply vddvibr not found, using dur
[ 4.826263] twl_rtc twl_rtc: Power up reset detected.
[ 4.832641] twl_rtc twl_rtc: Enabling TWL-RTC.
[ 4.839172] using rtc device, twl_rtc, for alarms
[ 4.844024] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
[ 4.851135] i2c /dev entries driver
[ 4.856109] Linux media interface: v0.10
[ 4.860870] lirc_dev: IR Remote Control driver registered, major 247
[ 4.867736] IR NEC protocol handler initialized
[ 4.872558] IR RC5(x) protocol handler initialized
[ 4.877685] IR RC6 protocol handler initialized
[ 4.882537] IR JVC protocol handler initialized
[ 4.887359] IR Sony protocol handler initialized
[ 4.892303] IR RC5 (streamzap) protocol handler initialized
[ 4.898254] IR LIRC bridge handler initialized
[ 4.902984] Linux video capture interface: v2.00
[ 4.908599] usbcore: registered new interface driver uvcvideo
[ 4.914733] USB Video Class driver (1.1.1)
[ 4.919403] smsc95xx 1-1.1:1.0: eth0: register 'smsc95xx' at usb-ehci-omap.01
[ 4.931518] dmm: probe base: fd300000, irq 145
[ 4.938385] Driver for 1-wire Dallas network protocol.
[ 4.945037] OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
[ 4.951751] cpuidle: using governor ladder
[ 4.956085] cpuidle: using governor menu
[ 4.962127] _regulator_get: omap_hsmmc.0 supply vmmc_aux not found, using dur
[ 4.973449] _regulator_get: omap_hsmmc.4 supply vmmc_aux not found, using dur
[ 5.052856] usbcore: registered new interface driver usbhid
[ 5.058746] usbhid: USB HID core driver
[ 5.063385] logger: created 256K log 'log_main'
[ 5.068359] logger: created 256K log 'log_events'
[ 5.073699] logger: created 256K log 'log_radio'
[ 5.078796] logger: created 256K log 'log_system'
[ 5.084106] thermal_governor_dev_register:Adding omap_ondie_governor governor
[ 5.091735] thermal_init_thermal_state:Not all components registered for cpu)
[ 5.104492] omap-iommu omap-iommu.0: ducati registered
[ 5.113372] SDP4430 SoC init
[ 5.146514] asoc: null-codec-dai <-> MultiMedia1 mapping ok
[ 5.153259] asoc: null-codec-dai <-> MultiMedia2 mapping ok
[ 5.160766] asoc: null-codec-dai <-> Voice mapping ok
[ 5.167327] asoc: null-codec-dai <-> Tones mapping ok
[ 5.173614] asoc: null-codec-dai <-> Vibra mapping ok
[ 5.179321] asoc: null-codec-dai <-> MODEM mapping ok
[ 5.184936] asoc: null-codec-dai <-> MultiMedia1 LP mapping ok
[ 5.192840] asoc: FM Digital <-> omap-mcbsp-dai.1 mapping ok
[ 5.199859] asoc: twl6040-legacy <-> mcpdm-dl mapping ok
[ 5.206481] asoc: dmic-hifi <-> omap-dmic-dai-0 mapping ok
[ 5.213165] asoc: twl6040-dl1 <-> mcpdm-dl1 mapping ok
[ 5.218933] asoc: twl6040-ul <-> mcpdm-ul1 mapping ok
[ 5.224548] asoc: twl6040-dl2 <-> mcpdm-dl2 mapping ok
[ 5.230255] asoc: twl6040-vib <-> mcpdm-vib mapping ok
[ 5.235992] asoc: Bluetooth <-> omap-mcbsp-dai.0 mapping ok
[ 5.242218] asoc: Bluetooth <-> omap-mcbsp-dai.0 mapping ok
[ 5.248382] asoc: FM Digital <-> omap-mcbsp-dai.1 mapping ok
[ 5.254699] asoc: MODEM <-> omap-mcbsp-dai.1 mapping ok
[ 5.260375] mmc0: host does not support reading read-only switch. assuming w.
[ 5.269195] asoc: dmic-hifi <-> omap-dmic-abe-dai-0 mapping ok
[ 5.275634] asoc: dmic-hifi <-> omap-dmic-abe-dai-1 mapping ok
[ 5.281890] mmc0: new high speed SDHC card at address e624
[ 5.288177] asoc: dmic-hifi <-> omap-dmic-abe-dai-2 mapping ok
[ 5.294647] mmcblk0: mmc0:e624 SU04G 3.69 GiB
[ 5.303649] input: PandaES Headset Jack as /devices/platform/soc-audio.0/sou1
[ 5.316802] Error: Driver 'hdmi-audio-dai' is already registered, aborting...
[ 5.324310] mmcblk0: p1 p2 p3 p4 < p5 p6 >
[ 5.328857] OMAP4 HDMI audio SoC init
[ 5.343658] asoc: hdmi-audio-codec <-> hdmi-audio-dai mapping ok
[ 5.359191] ALSA device list:
[ 5.362304] #0: TI OMAP4 Board
[ 5.365722] #1: TI OMAP4 HDMI Board
[ 5.381774] oprofile: hardware counters not available
[ 5.387115] oprofile: using timer interrupt.
[ 5.405364] GACT probability NOT on
[ 5.409057] Mirror/redirect action on
[ 5.412933] u32 classifier
[ 5.428680] Actions configured
[ 5.432281] Netfilter messages via NETLINK v0.30.
[ 5.437347] nf_conntrack version 0.5.0 (14391 buckets, 57564 max)
[ 5.444091] ctnetlink v0.93: registering with nfnetlink.
[ 5.463531] xt_time: kernel timezone is -0000
[ 5.468322] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 5.474060] arp_tables: (C) 2002 David S. Miller
[ 5.479003] TCP cubic registered
[ 5.482391] Initializing XFRM netlink socket
[ 5.487548] NET: Registered protocol family 10
[ 5.493072] Mobile IPv6
[ 5.495635] IPv6 over IPv4 tunneling driver
[ 5.501770] NET: Registered protocol family 17
[ 5.506469] NET: Registered protocol family 15
[ 5.511260] NET: Registered protocol family 35
[ 5.516143] lib80211: common routines for IEEE802.11 drivers
[ 5.523193] Registering the dns_resolver key type
[ 5.530181] VFP support v0.3: implementor 41 architecture 3 part 30 variant 4
[ 5.538513] mmc1: card claims to support voltages below the defined range. T.
[ 5.547912] ThumbEE CPU extension supported.
[ 5.552429] Registering SWP/SWPB emulation handler
[ 5.561065] thermal_cooling_dev_register:Found cpu cpu
[ 5.566558] thermal_cooling_dev_register: doing deferred tdev
[ 5.572631] thermal_sensor_dev_register:Found cpu cpu
[ 5.578002] thermal_sensor_dev_register:Adding omap_ondie_sensor sensor
[ 5.585021] thermal_init_thermal_state: Getting initial temp for cpu domain
[ 5.592376] thermal_request_temp
[ 5.595794] omap_safe_zone:hot spot temp 44221
[ 5.600524] cpufreq_apply_cooling: Unthrottle cool level 0 curr cool 125000
[ 5.607879] omap_thermal_step_freq_up: temperature reduced, stepping up to 0
[ 5.615509] thermal_request_temp got 38600
[ 5.620391] Power Management for TI OMAP4.
[ 5.625518] sr_init: No PMIC hook to init smartreflex
[ 5.630859] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver inid
[ 5.639434] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver inid
[ 5.647766] smartreflex smartreflex.2: omap_sr_probe: SmartReflex driver inid
[ 5.656433] SmartReflex Class3 initialized
[ 5.661529] cma: CMA: reserved 32 MiB at ac000000
[ 5.670440] mmc1: queuing unknown CIS tuple 0x91 (3 bytes)
[ 5.676269] clock: disabling unused clocks to save power
[ 5.685546] mmc1: new SDIO card at address 0001
[ 5.691070] omapfb omapfb: failed to apply dispc config
[ 5.702117] omapfb omapfb: failed to apply dispc config
[ 5.713134] omapfb omapfb: failed to apply dispc config
[ 5.718688] omapdss DPI: Could not find exact pixel clock. Requested 74250 kz
[ 6.268798] Console: switching to colour frame buffer device 160x90
[ 6.301635] regulator_init_complete: VANA: incomplete constraints, leaving on
[ 6.310333] regulator_init_complete: CLK32KG: incomplete constraints, leavinn
[ 6.321350] regulator_init_complete: VDAC: incomplete constraints, leaving on
[ 6.331878] regulator_init_complete: VUSB: incomplete constraints, leaving on
[ 6.341827] twl_rtc twl_rtc: setting system clock to 2000-01-01 00:00:01 UTC)
[ 6.350921] omap4iss omap4iss: Revision 40000103 found
[ 6.361114] ov5650 3-0036: Failed reading register 0x302a!
[ 6.366973] ov5650 3-0036: Failure to detect OV5650 chip
[ 6.373046] iss_register_subdev_group: Unable to register subdev ov5650
[ 6.381408] Freeing init memory: 276K
[ 6.392425] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_.
[ 6.725006] init: could not open /dev/keychord
[ 6.730682] init: cannot open '/initlogo.rle'
[ 6.802764] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. )
[ 6.832336] EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. )
[ 6.861816] EXT4-fs (mmcblk0p3): recovery complete
[ 6.869964] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. )
[ 6.923706] init: cannot find '/system/bin/gonksched', disabling 'gonksched'
[ 6.931854] init: cannot find '/system/bin/fakeappops', disabling 'fakeappop'
[ 6.940826] init: cannot find '/system/bin/nfcd', disabling 'nfcd'
[ 6.949279] init: cannot find '/system/bin/surfaceflinger', disabling 'surfa'
[ 6.958190] init: cannot find '/system/bin/app_process', disabling 'zygote'
[ 7.071319] init: cannot find '/system/etc/install-recovery.sh', disabling ''
[ 7.089752] android_usb: already disabled
[ 7.095581] adb_bind_config
[ 7.098632] warning: `rilproxy' uses 32-bit capabilities (legacy support in )
shell@android:/ $ [ 7.309478] PVR: Installing MISR with cookie c09e94b8
[ 7.319946] PVR: Installing device LISR SGX ISR on IRQ 53 with cookie efe0830
[ 7.328552] PVR: OSUnMapPhysToLin: unmapping 65535 bytes from f09e0000
[ 7.336975] PVR: SysFinalise: Version string: SGX revision = 1.2.0
[ 7.394958] adb_open
[ 7.617340] adb_release
[ 7.620330] adb_open
[ 7.623687] adb_bind_config
[ 9.265319] request_suspend_state: wakeup (3->0) at 9273651125 (2000-01-01 0)
[ 26.811096] misc dsscomp: [efe73800] ignoring set failure -22
[ 27.405273] request_suspend_state: wakeup (0->0) at 27414093020 (2014-03-20 )
[ 101.115386] request_suspend_state: sleep (0->3) at 101124237063 (2014-03-20 )
[ 101.125122] DSSCOMP: dsscomp_early_suspend
[ 101.141235] DSSCOMP: blanked screen
======================================================
Please give me some advice,
Thanks in advance.
Tatsuya
_______________________________________________
dev-b2g mailing list
[email protected]
https://lists.mozilla.org/listinfo/dev-b2g
