El martes, 22 de abril de 2014 03:06:20 UTC-5, Gabriele Svelto escribió: > On 21/04/2014 22:49, [email protected] wrote: > > > Hi I have a problem with my GP Peak, after installing the Android 4.2.2 > > (Lite version for Peak) zip file that is on the revolution page on the > > download.geeksphone.com my cell doesn't charge the system properly, it > > freezes on the GeeksPhone image. > > > I can only reach the recovery menu but my computer doesn´t recognize it. > > > > What OS are you using for flashing the phone? Linux? If that's the case > > you should make sure that you've got the right udev rules setup. Since > > you've flashed an Android image for x86 I don't think your device will > > show up in adb anymore but it should show up when running 'fastboot > > devices' so if you're under Linux do the following: > > > > 1) Make sure you have the following two lines in > > /etc/udev/rules.d/51-android.rules > > > > SUBSYSTEM=="usb", ATTRS{idVendor}=="18d1", MODE="0666" > > SUBSYSTEM=="usb", ATTRS{idVendor}=="05c6", MODE="0666" > > > > If you have to add them remember to restart udev > > > > 2) Restart your phone in fastboot mode then plug it to your computer > > > > 3) Run 'lsusb', among other things you should get a line like this (the > > bus / device numbers will be different but the ID should be the same) > > > > Bus 001 Device 004: ID 18d1:d00d Google Inc. > > > > 4) Run 'fastboot devices' it should print out only the following line > > > > Android fastboot > > > > 5) If 'lsusb' shows the proper device ID but 'fastboot' doesn't pick it > > up it means that your udev rules have not been setup properly. Double > > check them and try again after rebooting your machine which should > > ensure that the correct rules are picked up. > > > > Gabriele
Thanx, problem solved, you're awesome _______________________________________________ dev-b2g mailing list [email protected] https://lists.mozilla.org/listinfo/dev-b2g
