That's what I did and got the above log. It was like this: $ fastboot flash recovery recovery.img < waiting for device >
and when I try to re connect the cable, I get this: ERROR: Unable to create a plug-in (e00002be) I even tried with installing .zip from SD card and got the log what I posted in my first post. On Sunday, October 26, 2014 8:49:41 AM UTC+5:30, Tapu Afrad wrote: > OK, then.... First remove your phones batery, wait 30 second, reconnect it. > Then press Power button while holding Volume Down button. It should freeze in > Geeksphone screen or in a blank screen. Connect your device to your PC. In > terminal change directory to that folder where the flash files are. Now run > the command one after another, > > fastboot flash recovery recovery.img > fastboot flash boot boot.img > fastboot flash userdata userdata.img > fastboot flash system system.img > fastboot reboot > > Try it... > > > Date: Sat, 25 Oct 2014 18:04:58 -0700 > > From: [email protected] > > To: [email protected] > > Subject: Re: [b2g] Geeksphone stopped working after installing Gaia > > > > Hi Tapu, > > > > Thanks for the reply. > > > > I tried this but this also doesn't work. The phone doesn't go in fastboot > > mode after running reboot bootloader. It simply starts. Also, while running > > the recovery.img, it shows following log and stops there. > > > > < waiting for device > > > ERROR: Unable to create a plug-in (e00002be) > > > > I tried replugging in the cable, but that doesn't make any effect. > > > > Thanks > > > > On Saturday, October 25, 2014 11:07:57 PM UTC+5:30, Tapu Afrad wrote: > > > Go to here [1] and step to "Ok, I bricked my phone" section... > > > > > > Hope this may help you... > > > > > > [1] > > > https://developer.mozilla.org/bn-BD/Firefox_OS/Developer_phone_guide/Geeksphone > > > > > > > > > > Date: Sat, 25 Oct 2014 04:20:02 -0700 > > > > From: [email protected] > > > > To: [email protected] > > > > Subject: [b2g] Geeksphone stopped working after installing Gaia > > > > > > > > Hi there, > > > > > > > > I was updating gaia on my Geeksphone device. After '$ make > > > > install-gaia' command, my phone isn't working. It is just showing a > > > > single screen just like this: > > > > http://www.shraddhaporwal.in/nightly_screenshot.png > > > > > > > > I tried with reseting the phone itself by downloading the latest > > > > nightly build and installing it but now my mac isn't able to detect > > > > device. It shows error like this: > > > > > > > > $ ./flash_mac.sh > > > > adb server is out of date. killing... > > > > * daemon started successfully * > > > > error: device not found > > > > < waiting for device > > > > > > > > > I tried attaching my another Android devices, but it show the list of > > > > devices for command '$ adb devices' > > > > > > > > Any idea how can I fix it? > > > > > > > > Thanks in advance! > > > > _______________________________________________ > > > > dev-b2g mailing list > > > > [email protected] > > > > https://lists.mozilla.org/listinfo/dev-b2g > > _______________________________________________ > > dev-b2g mailing list > > [email protected] > > https://lists.mozilla.org/listinfo/dev-b2g _______________________________________________ dev-b2g mailing list [email protected] https://lists.mozilla.org/listinfo/dev-b2g
