To add a udev rule for fastboot, create a file (mine is called android.rules)
in the /etc/udev/rules. directory with this in it:
SUBSYSTEM=="usb", ATTRS{idVendor}=="18d1", MODE="0666" # Google (also fastboot)
SUBSYSTEM=="usb", ATTRS{idVendor}=="05c6", MODE="0666" # Flame (adb)
You then need to run:
sudo udevadm control --reload-rules
and unplug and replug the usb cable.
Dave Hylands
----- Original Message -----
> From: "Dee" <[email protected]>
> To: [email protected]
> Sent: Sunday, November 9, 2014 8:56:34 AM
> Subject: Re: [b2g] Trouble updating Firefox OS on Mozilla Flame
> Hello again,
> I have solved the problem myself. I executed every line in the flash.sh
> and saw:
> $ fastboot devices
> no permissions fastboot
> So the permissions are not correct. The upgrade page says that you
> should not execute the script with sudo, unfortunately it does not say
> what I should do so that I can execute it without. (A general hint to
> udev is not enough.)
> So I executed every fastboot-line in the script with sudo and that works
> until:
> $ sudo fastboot flash custpack custpack.img
> target reported max download size of 301989888 bytes
> error: cannot load 'custpack.img': No such file or directory
> There is no custpack.img in the v188.zip. So I have checked the v180.zip
> in comparison and there are some strange things:
> 1. The v180.zip does not have any custpack.img either. But the flash.sh
> script does not have any custpack.img line. So I ignored it for v188.zip.
> 2. The v180-script has a line
> fastboot flash partition gpt_both0.bin
> That line is missing in the v188.zip flash.bat/sh. Is it necessary?
> At the end my update worked. Unfortunately my phone is in English now.
> :( Some bugs were fixed and some new bugs were added. :(
> Who's responsible for the page
> https://developer.mozilla.org/en-US/Firefox_OS/Developer_phone_guide/Flame#Updating_your_Flame%27s_software
> and especially for the images on this page. The script should be
> corrected as soon as possible. The problem with "sudo fastboot" should
> be mentioned more clearly how to fix.
> Best regards
> Dominik
> Am 09.11.2014 um 15:05 schrieb Dee:
> > Hello,
> >
> > I own a Flame since four months. Because of some bugs and crashes I
> > wanted to update the software. So I went to
> > https://developer.mozilla.org/en-US/Firefox_OS/Developer_phone_guide/Flame#Updating_your_Flame%27s_software.
> > I thought that I needed to update the base image first. So I've download
> > the Base Image v188.zip and followed the instructions:
> >
> > $ adb devices -l
> > List of devices attached
> > f30ecc6b device usb:2-2 product:msm8610 model:Flame
> > device:flame
> >
> > $ unzip v188.zip
> > $ cd 188
> > $ mv flash.bat flash.sh
> > $ chmod +x flash.sh
> >
> > $ ./flash.sh
> > * daemon not running. starting it now on port 5037 *
> > * daemon started successfully *
> > List of devices attached
> > f30ecc6b device
> >
> > Flash nCPU...
> > < waiting for device >
> >
> > The Flame vibrated shortly and now I see the ThunderSoft logo in the
> > display. Nothing happens at all since 30 minutes. I don't think anything
> > else will happen.
> >
> > I'm not sure if it's safe to remove the phone from the USB connection or
> > to stop the flash script.
> >
> > Any hints how to "rescue" my phone and proceed with the update?
> >
> > Best regards
> > Dominik
> >
> >
> >
> >
> >
> > _______________________________________________
> > dev-b2g mailing list
> > [email protected]
> > https://lists.mozilla.org/listinfo/dev-b2g
> >
> _______________________________________________
> dev-b2g mailing list
> [email protected]
> https://lists.mozilla.org/listinfo/dev-b2g
_______________________________________________
dev-b2g mailing list
[email protected]
https://lists.mozilla.org/listinfo/dev-b2g
