The branch stable/13 has been updated by 0mp (doc, ports committer): URL: https://cgit.FreeBSD.org/src/commit/?id=6c9b3cb4936e789ca43338a5f92a36fa51b2f7c2
commit 6c9b3cb4936e789ca43338a5f92a36fa51b2f7c2 Author: Mateusz Piotrowski <[email protected]> AuthorDate: 2021-04-18 07:45:18 +0000 Commit: Mateusz Piotrowski <[email protected]> CommitDate: 2021-04-21 07:50:58 +0000 spigen.4: Fix typos MFC after: 3 days (cherry picked from commit 40277af7f23405c276edf02c3ddc8e770a06e3f6) --- share/man/man4/spigen.4 | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/share/man/man4/spigen.4 b/share/man/man4/spigen.4 index e586b0baa82a..8a8cc556be81 100644 --- a/share/man/man4/spigen.4 +++ b/share/man/man4/spigen.4 @@ -57,7 +57,7 @@ device is associated with a single chip-select line on the bus, and all I/O performed through that instance is done with that chip-select line asserted. .Pp -SPI data transfers are inherently bi-directional; there are not separate +SPI data transfers are inherently bi-directional; there are no separate read and write operations. When commands and data are sent to a device, data also comes back from the device, although in some cases the data may not be useful (or even @@ -117,7 +117,7 @@ Set the maximum clock speed (bus frequency in Hertz) to be used when communicating with this slave device. The setting remains in effect for subsequent transfers; it is not necessary to reset this before each transfer. -The actual bus frequency may be lower due to hardware limitiations +The actual bus frequency may be lower due to hardware limitations of the SPI bus controller device. .It Dv SPIGENIOC_GET_SPI_MODE Pq Vt uint32_t Get the SPI mode (clock polarity and phase) to be used _______________________________________________ [email protected] mailing list https://lists.freebsd.org/mailman/listinfo/dev-commits-src-all To unsubscribe, send any mail to "[email protected]"
