They look great!
On Wed, Sep 25, 2013 at 4:57 PM, Billie Rinaldi <[email protected]>wrote: > I've experimented with creating some svg versions of our logo and favicon. > They're checked into our site in the images directory. The svg images can > be resized by setting an image width in html, although you might get a > crisper image by copying the svg file and changing the scale factor on the > following line: <g transform="scale(1.0)">. (It would also be possible to > create an svg that automatically resizes itself to the width of the browser > window, but these don't do that.) > > There are two versions of each file, one matching the layout of the > original sketch, and one without extra white space around the edges. I had > removed the white space manually from the pngs used on our site so that the > logo would line up better. > > Christopher, it should be easy to adjust the colors on these as well. > > Billie > > > > On Tue, Sep 24, 2013 at 1:22 PM, Christopher <[email protected]> wrote: > > > Cool. If we can, a separate pde would be good for the favicon. > > > > In any case, what got me thinking about this is the possible use of > > our logo on the monitor page, which may involve some color scheme > > changes to the monitor. > > > > -- > > Christopher L Tubbs II > > http://gravatar.com/ctubbsii > > > > > > On Tue, Sep 24, 2013 at 2:43 PM, Billie Rinaldi > > <[email protected]> wrote: > > > I think I've tracked down the correct one. I'm taking a look at > adding a > > > TM in the code. > > > I don't think there was ever a pde for the favicon, I just cut and > pasted > > > that one together. > > > > > > Billie > > > > > > > > > On Tue, Sep 24, 2013 at 11:37 AM, Christopher <[email protected]> > > wrote: > > > > > >> That one has square corners and less spacing around the blocks than > > >> the one we are using on the site (and the missing TM). > > >> > > >> -- > > >> Christopher L Tubbs II > > >> http://gravatar.com/ctubbsii > > >> > > >> > > >> On Mon, Sep 23, 2013 at 10:15 PM, Eric Newton <[email protected]> > > >> wrote: > > >> > I just downloaded the Dec-11 logo, and it renders just fine (minus > the > > >> > "TM"). > > >> > > > >> > -Eric > > >> > > > >> > > > >> > > > >> > On Mon, Sep 23, 2013 at 8:07 PM, Billie Rinaldi < > > >> [email protected]>wrote: > > >> > > > >> >> I'll see if I can track anything down. I might disagree that it > > should > > >> be > > >> >> checked into the project, though. > > >> >> > > >> >> Also, both images have been manually edited after being generated > > (at a > > >> >> minimum, adding the required "TM"). > > >> >> > > >> >> Billie > > >> >> On Sep 23, 2013 6:40 PM, "Christopher" <[email protected]> > wrote: > > >> >> > > >> >> > Umm, where is the version-controlled source for our logo? > > >> >> > > > >> >> > ACCUMULO-87 describes its generation from a file that is > > interpreted > > >> >> > by the software at processing.org, but there does not appear to > > be a > > >> >> > version of the pde file for either the logo or the favicon > > anywhere on > > >> >> > that ticket, that corresponds to the actual images that were > > accepted, > > >> >> > and I do not see any pde file in any of the source control repos. > > >> >> > > > >> >> > -- > > >> >> > Christopher L Tubbs II > > >> >> > http://gravatar.com/ctubbsii > > >> >> > > > >> >> > > >> > > >
