I had commented on https://issues.apache.org/jira/browse/ACCUMULO-4602 that I
often have trouble with this and a few others.
Not sure it makes me feel any better, but for me, this is not "new" to 1.7.3. I
thought it could be due my virtual-box development environment, but I've tried
running verify on a AWS c4.2xlarge instance with the same intermittent results.
I have had it pass, but more often than not it fails.
To help decide if 1.7.3-rc0 could be a candidate, I made the following chart
tracking IT issues – and then at one point the KerberosRenewall passed for me
(and it passed a few times in a row) and I stopped updating the chart.:
Instance Type
Test
AWS1
AWS2
AW3
OpenBox 1
OpenBox 2
OpenBox3
AssignmentThreadsIT.testConcurrentAssignmentPerformance:91
x
x
x
BadDeleteMarkersCreatedIT>AccumuloClusterIT.teardownCluster:223 » TestTimedOut
x
ChaoticBalancerIT.test:80->Object.wait:502->Object.wait:-2 » TestTimedOut
test...
x
x
ConditionalWriterIT.testTrace:1476 » TestTimedOut test timed out after 60
seco...
x
DurabilityIT.testWriteSpeed:103 log should be faster than flush
x
x
x
x
FateStarvationIT.run:79 » Runtime java.lang.RuntimeException:
org.apache.zooke...
x
KerberosRenewalIT.testReadAndWriteThroughTicketLifetime » TestTimedOut test
ti...
x
x
x
x
x
x
ShellServerIT.trace:1444
x
x
TabletStateChangeIteratorIT.test:100 No tables should need attention
expected:<0> but was:<1>
x
x
UnorderedWorkAssignerReplicationIT.dataWasReplicatedToThePeerWithoutDrain:548 »
TableOffline
KerberosReplicationIT.dataReplicatedToCorrectTable:224 » TestTimedOut test
tim...
x
I am seeing the same intermittent failures with 1.7.3-rc1 and 1.7.3-rc2.
-----Original Message-----
From: Christopher [mailto:[email protected]]
Sent: Saturday, March 11, 2017 1:53 AM
To: Accumulo Dev List <[email protected]>
Subject: Re: [VOTE] Accumulo 1.7.3-rc2
+1, reluctantly, due to KerberosRenewalIT failures described below.
Verified hashes/sigs/javadoc jars/source jars/git SHA1/tarball contents/license
stuffs/ITs.
I could not get KerberosRenewalIT to pass at all (I tried half a dozen times).
It keeps timing out. It looks like it's supposed to finish between
8 and 9 minutes... an insanely long time for a *single* test to be running,
IMO, especially one as narrowly focused as this one (ShellServerIT, for
example, runs about that long, but covers a very broad spectrum of Accumulo
behavior). This test ignores the scaling parameter, too, so it cannot be scaled
with the timeout.factor system property.
The actual behavior of the test is to just create a table, put in data, scan
it, then delete the table, every 5 seconds for 8 minutes minimum, under the
assumption that the Kerberos ticket will expire at some point during that time
period, and Accumulo will automatically renew it and continue functioning (the
actual condition of expiration and renewal is never checked). This seems like
something that should be mocked out on the object responsible for the detecting
and handling the renewal, and not a
8-9 minute integration test. It's not even clear from the current test which
code is responsible for that (e.g. which code this test is testing).
The most recent failure timed out after 9 minutes trying to create an Accumulo
table. This could indicate that there's a problem with the ticket not renewing
when there's an expiration waiting for a FATE operation... or it could just be
that's where the test happened to be when the 9 minutes were up.
Is anybody else experiencing problems with this test?
In spite of this failure, I'm willing to give my +1 anyway, since I'm inclined
to think this is simply an unreliable test.
On Fri, Mar 10, 2017 at 5:45 PM Keith Turner < <mailto:[email protected]>
[email protected]> wrote:
> I also verified the rfile fix.
>
> On Fri, Mar 10, 2017 at 5:38 PM, Keith Turner < <mailto:[email protected]>
> [email protected]> wrote:
> > +1
> >
> > Did the following :
> >
> > * Was able to build Fluo against jars in staging repo.
> > * Sigs checkout for tarballs
> > * No diffs between src tarball and rc2 branch
> > * Looked at diffs between rc1 and rc2
> >
> >
> > On Fri, Mar 10, 2017 at 7:35 AM, Ed Coleman < <mailto:[email protected]>
> > [email protected]> wrote:
> >> Accumulo Developers,
> >>
> >>
> >>
> >> Please consider the following candidate for Accumulo 1.7.3. This
> candidate
> >> contains two changes from 1.7.3-rc1:
> >>
> >>
> >>
> >> - <https://issues.apache.org/jira/browse/ACCUMULO-4600>
> >> https://issues.apache.org/jira/browse/ACCUMULO-4600 -
> shell does
> >> not fall back to accumulo-site.xml when on classpath.
> >>
> >> - <https://issues.apache.org/jira/browse/ACCUMULO-4597>
> >> https://issues.apache.org/jira/browse/ACCUMULO-4597 - NPE
> from
> >> RFile PrintInfo
> >>
> >>
> >>
> >> Git Commit:
> >>
> >> 38d8a1d139eb21f0c9882be877db1b77aa1a45db
> >>
> >> Branch:
> >>
> >> 1.7.3-rc2
> >>
> >>
> >>
> >> If this vote passes, a gpg-signed tag will be created using:
> >>
> >> git tag -f -m 'Apache Accumulo 1.7.3' -s rel/1.7.3
> >> 38d8a1d139eb21f0c9882be877db1b77aa1a45db
> >>
> >>
> >>
> >> Staging repo:
> >>
> <https://repository.apache.org/content/repositories/orgapacheaccumulo-1>
> https://repository.apache.org/content/repositories/orgapacheaccumulo-1
> 065
> >>
> >> Source (official release artifact):
> >>
> <https://repository.apache.org/content/repositories/orgapacheaccumulo-1>
> https://repository.apache.org/content/repositories/orgapacheaccumulo-1
> 065/or
> >> g/apache/accumulo/accumulo/1.7.3/accumulo-1.7.3-src.tar.gz
> >>
> >> Binary:
> >>
> <https://repository.apache.org/content/repositories/orgapacheaccumulo-1>
> https://repository.apache.org/content/repositories/orgapacheaccumulo-1
> 065/or
> >> g/apache/accumulo/accumulo/1.7.3/accumulo-1.7.3-bin.tar.gz
> >>
> >> (Append ".sha1", ".md5", or ".asc" to download the signature/hash
> >> for a given artifact.)
> >>
> >>
> >>
> >> All artifacts were built and staged with:
> >>
> >> mvn release:prepare && mvn release:perform
> >>
> >>
> >>
> >> Signing keys are available at
> >> <https://www.apache.org/dist/accumulo/KEYS>
> >> https://www.apache.org/dist/accumulo/KEYS
> >>
> >> (Expected fingerprint: D87F9F417753D0C88598437EFC4368E0864BCC36)
> >>
> >>
> >>
> >> Release notes (in progress) can be found at:
> >> <https://accumulo.apache.org/release_notes/1.7.3>
> >> https://accumulo.apache.org/release_notes/1.7.3
> >>
> >>
> >>
> >> Please vote one of:
> >>
> >> [ ] +1 - I have verified and accept...
> >>
> >> [ ] +0 - I have reservations, but not strong enough to vote against...
> >>
> >> [ ] -1 - Because..., I do not accept...
> >>
> >> ... these artifacts as the 1.7.3 release of Apache Accumulo.
> >>
> >>
> >>
> >> This vote will end on Mon Mar 13 13:00:00 UTC 2017
> >>
> >> (Mon Mar 13 09:00:00 EDT 2017 / Mon Mar 13 06:00:00 PDT 2017)
> >>
> >>
> >>
> >> Thanks!
> >>
> >>
> >>
> >> P.S. Hint: download the whole staging repo with
> >>
> >> wget -erobots=off -r -l inf -np -nH \
> >>
> >>
> >>
> <https://repository.apache.org/content/repositories/orgapacheaccumulo-1>
> https://repository.apache.org/content/repositories/orgapacheaccumulo-1
> 065/
> >>
> >> # note the trailing slash is needed
> >>
>
