The sequence2 module is registered and enabled. That is tested first in
TestDiagramUpdateAtLoad.doLoad(String).
The problem is that the sequence2 module doesn't register a translation for
FigDestroyActionMessage. It offers a translation for FigCreateActionMessage,
FigDeleteActionMessage, FigCallActionMessage, FigReturnActionMessage.
Shall we add a translation also from FigDestroyActionMessage?
/Linus
2009/9/30 Bob Tarling <[email protected]>
> Hi Linus
>
> There are no dependencies from sequence2 to sequence regarding runtime
> classes. But we should be able to read old style sequence diagrams and
> convert them to sequence2, that is what is failing here.
>
> In order to allow this the sequence2 module plugs into the persistence
> mechanism to convert any old sequence diagram class names to sequence2
> class names as the PGML is read.
>
> As that code clearly isn't operating it seems to me that the sequence2
> module isn't being registered.
>
> I think you'll find the failing test works fine in eclipse when the
> sequence2 module is included.
>
> Regards
>
> Bob.
>
>
> 2009/9/30 Linus Tolke <[email protected]>:
> > The same problem appears when running the tests from the ArgoUML
> sequence2
> > tests.launch from within Eclipse. Where are the designed dependencies
> > between sequence and sequence2 documented?
> >
> > /Linus
> >
> > 2009/9/29 Linus Tolke Tigris <[email protected]>
> >>
> >> The problem is in the argouml-core-diagrams-sequence2 module. Shall that
> >> one really depend on the sequence diagram module?
> >>
> >> /Linus
> >>
> >> 2009/9/29 Bob Tarling <[email protected]>
> >>>
> >>> There is currently a ClassNotFound exception that indicates that the
> >>> test runs don't currently include the sequence diagram module in the
> >>> class path and/or don't register that module.
> >>>
> >>> Can you correct that Linus?
> >>>
> >>> Bob
> >>>
> >>>
> >>>
> >>> 2009/9/29 Linus Tolke <[email protected]>:
> >>> > I have now opened the firewall so that it is possible to look at the
> >>> > hudson
> >>> > server and I have reconfigured so that mails are sent to the person
> >>> > that
> >>> > "broke the build" using hudson's definition of this and
> >>> > [email protected].
> >>> >
> >>> > You can find the server at http://closettop.homelinux.org:8080.
> Please
> >>> > notice that the network connection is bad so it might be slow or
> >>> > failing.
> >>> >
> >>> > /Linus
> >>> >
> >>> > 2009/9/28 Linus Tolke Tigris <[email protected]>
> >>> >>
> >>> >> I understand this much. I will attempt to enable that tonight so
> that
> >>> >> you
> >>> >> can all see how well it works.
> >>> >> The problem is that the connection between the router and the host
> is
> >>> >> bad.
> >>> >> Sofar, most of the communication for the nightly build is done using
> >>> >> the
> >>> >> subversion http connections and I have done some tuning and some
> >>> >> special
> >>> >> things to make several retries. For the SMTP connection from the
> >>> >> Hudson
> >>> >> server, the simple implementation in hudson doesn't have any such
> >>> >> retry
> >>> >> options and for web accesses from the outside to the inside, there
> is
> >>> >> no
> >>> >> such option.
> >>> >> If this doesn't work, I will have to put the computer in the same
> room
> >>> >> as
> >>> >> the router and connect it through a Ethernet cable instead of the
> >>> >> WLAN.
> >>> >> /Linus
> >>> >>
> >>> >> 2009/9/28 Dave Thompson <[email protected]>
> >>> >>>
> >>> >>> Not sure if this is still an issue, but it is possible to forward
> >>> >>> particular ports from the outside, to a specific machine within the
> >>> >>> network
> >>> >>> on most access points/modems. Some ISP's block this with a
> separate
> >>> >>> setting
> >>> >>> on their configuration pages, but usually there is a way to
> re-enable
> >>> >>> it.
> >>> >>>
> >>> >>> In the past, I have used this along with dynamic dns, to provide an
> >>> >>> externally accessible web page, even on a dial-up connection with
> no
> >>> >>> static
> >>> >>> IP address.
> >>> >>>
> >>> >>> The only thing to consider is vulnerability, as you'd have to keep
> up
> >>> >>> to
> >>> >>> date with any patches on the exposed server/firewall.
> >>> >>>
> >>> >>> Regards,
> >>> >>>
> >>> >>> Dave
> >>> >>>
> >>> >>>
> >>> >>>
> >>> >>> On Tue, 22 Sep 2009 14:18 +0200, "Linus Tolke" <[email protected]>
> >>> >>> wrote:
> >>> >>>
> >>> >>> Hello Bob!
> >>> >>>
> >>> >>> The server I use to run the nightly builds is behind a firewall.
> This
> >>> >>> means that if I enable the mail function from the Hudson server,
> the
> >>> >>> links
> >>> >>> pointing to the failing test cannot be followed. This means that
> work
> >>> >>> has to
> >>> >>> be done to get this to work properly. Any ideas on the simplest way
> >>> >>> to solve
> >>> >>> this?
> >>> >>>
> >>> >>> /Linus
> >>> >>>
> >>> >>> 2009/9/22 Bob Tarling <[email protected]>
> >>> >>>
> >>> >>> Bob said:
> >>> >>> > Linus - do you have any plans to get junit notification working?
> >>> >>> ?!?
> >>> >>>
> >>> >>> > Bob.
> >>> >>>
> >>> >>> ------------------------------------------------------
> >>> >>>
> >>> >>>
> >>> >>>
> http://argouml.tigris.org/ds/viewMessage.do?dsForumId=450&dsMessageId=2397767
> >>> >>>
> >>> >>> To unsubscribe from this discussion, e-mail:
> >>> >>> [[email protected]].
> >>> >>> To be allowed to post to the list contact the mailing list
> moderator,
> >>> >>> email: [[email protected]]
> >>> >>>
> >>> >>> --
> >>> >>> Dave Thompson
> >>> >>> [email protected]
> >>> >>
> >>> >
> >>> >
> >>>
> >>> ------------------------------------------------------
> >>>
> >>>
> http://argouml.tigris.org/ds/viewMessage.do?dsForumId=450&dsMessageId=2401535
> >>>
> >>> To unsubscribe from this discussion, e-mail:
> >>> [[email protected]].
> >>> To be allowed to post to the list contact the mailing list moderator,
> >>> email: [[email protected]]
> >>
> >
> >
>
> ------------------------------------------------------
>
> http://argouml.tigris.org/ds/viewMessage.do?dsForumId=450&dsMessageId=2401998
>
> To unsubscribe from this discussion, e-mail: [
> [email protected]].
> To be allowed to post to the list contact the mailing list moderator,
> email: [[email protected]]
>
------------------------------------------------------
http://argouml.tigris.org/ds/viewMessage.do?dsForumId=450&dsMessageId=2402226
To unsubscribe from this discussion, e-mail:
[[email protected]].
To be allowed to post to the list contact the mailing list moderator, email:
[[email protected]]
