Ugh, I didn't see the install target. Thanks for your patience. You are correct - builds now work correctly (other than the 0.30 can't open 0.28.1 projects issue). Since I only have a few UML projects for my team, I can upgrade each file manually, since that'd probably be less work than re-creating the rest of your build environment.
Is there a way to upgrade the file version of .zargo project files? I tried opening and using "save-as" with the Web Start version, but that didn't seem to do it. Alternatively, are there complete build instructions anywhere? I remember creating my initial instructions for 0.28.1 from somewhere on the website, but couldn't find it again. I've been bumbling through these recent steps, but it may be easier if I was following the same way the official releases are built. It's almost tragic, seeing that as of 0.30 (since mass-export from command line was implemented via this diff <http://argouml.tigris.org/source/browse/argouml/trunk/src/argouml-app/src/org/argouml/uml/ui/ActionSaveAllGraphics.java?view=diff&r1=17024&r2=17025&pathrev=17025&diff_format=l>) my custom build only changes two lines in "\src\argouml-app\src\org\argouml\uml\ui\SaveGraphicsManager.java" to set SVG images as the default, rather than PNG, since there's no way (as of my old instructions form 0.28.1) to set the image type on a mass-export from the command line. If, since then, somebody has implemented that ability, I could use that and not go through these compiling problems at all. -Nathaniel Kofalt On 5/6/2010 10:15 AM, Linus Tolke Tigris wrote: > Moved to the dev list. > > I guess that this is because of a combination of events: > * we moved the Java-specific parts to a separate subproject between > 0.28.1 and 0.30 > * The old project requires Java-specific parts. > * You build without the Java project. All official builds are done > with the Java project included. > > /Linus > > On Thu, May 6, 2010 at 12:17 PM, Nathaniel Kofalt <[email protected] > <mailto:[email protected]>> wrote: > > A quick clarification: > > If I checkout VERSION_0_28_1, change line 12 of the > "argouml/build.xml" file as I mentioned, then run "build" and > "build update-argouml.jar-manifest" the resultant build can > correctly open projects with sequence diagrams! That's good. > > However, if I checkout VERSION_0_30, change the build file, and > run "build" and "build update-argouml.jar-manifest" the newer > build cannot open any projects created with the older ArgoUML > version, failing with a > org.xml.sax.SAXException: Plugin profile "Java" is not available > in installation > error. Attached is the trace it provided, and the exact commands I > used to build. > > Meanwhile, the Web Start of 0.30 from the official website can > correctly open these projects made by an older version of the > program. So the problem I'm experiencing now may be a different > problem. > > -Nathaniel Kofalt > > > > On 5/6/2010 4:38 AM, Nathaniel Kofalt wrote: >> Hello Linus, >> Maybe I'm missing something obvious - I used the build batch >> in the location you described using these exact commands: >> >> svn checkout >> http://argouml.tigris.org/svn/argouml/releases/VERSION_0_30/ >> argouml --username guest >> cd argouml >> build >> build.bat update-argouml.jar-manifest >> >> The first build target worked fine, creating a project in >> "argouml\src\argouml-build\build". >> However the second target gave a different build error this >> time (censored the file paths outside the SVN checkout): >> BUILD FAILED >> ....\argouml\build.xml:74: .....\argouml\build not found. >> >> It looks like this doesn't have the right configuration for this >> folder. I tried adding a "build" folder in the "argouml" root >> which didn't do anything, just created a 1 KB jar file in the new >> folder. However changing line 12 (the build.dir value) from: >> <property name="build.dir" value="build"/> >> to : >> <property name="build.dir" value="src/argouml-build/build"/> >> >> Made it change the argouml jar, though the built project still >> doesn't work correctly. Was this a mistake in the makefile, or >> could I have built it properly with another method? >> >> -Nathaniel Kofalt >> >> On 5/6/2010 12:12 AM, Linus Tolke Tigris wrote: >>> Hello Nathaniel! >>> >>> It is in on the "top" level, i.e. the integration level where >>> the separate modules are integrated. You can find it here: >>> >>> http://argouml.tigris.org/source/browse/argouml/trunk/build.xml?annotate=17806#id64 >>> >>> http://argouml.tigris.org/source/browse/argouml/releases/VERSION_0_28_1/build.xml?annotate=17806#id64 >>> or >>> >>> http://argouml.tigris.org/source/browse/argouml/releases/VERSION_0_30/build.xml?annotate=17806#id64 >>> respectively. That means two levels up from the build.xml in the >>> argouml-build directory. >>> >>> /Linus >>> >>> >>> On Thu, May 6, 2010 at 12:01 AM, Nathaniel Kofalt >>> <[email protected] <mailto:[email protected]>> wrote: >>> >>> Hello Linus, thank you for your reply! >>> Sorry I took awhile to get back to you. Your explanation >>> makes sense, but when attempting your method on >>> VERSION_0_28_1 or the newer VERSION_0_30 checkouts, I get >>> the following error when running that last target: >>> >>> Target "update-argouml.jar-manifest" does not exist in the >>> project "argouml". >>> >>> I tried this in the argouml\src\argouml-build and a few >>> other locations, as there seems to be a lot of build scripts >>> lying around that call each other. Where exactly did you run >>> this target? >>> >>> Nathaniel Kofalt >>> >>> >>> >>> On 4/29/2010 4:48 PM, Linus Tolke Tigris wrote: >>>> Hello Nathaniel! >>>> >>>> You have found a weakness in the loading mechanism and that >>>> is that it relies on all the fact that all diagrams to be >>>> loaded are on the class path. When you build as you >>>> describe the argouml.jar is created without including them >>>> in the Class-Path:-entry in the manifest. >>>> >>>> To fix, you can use the same function that we use when >>>> doing releases. >>>> >>>> Build like this: >>>> svn checkout >>>> http://argouml.tigris.org/svn/argouml/releases/VERSION_0_28_1/ >>>> >>>> <http://argouml.tigris.org/svn/argouml/releases/VERSION_0_28_1/src> argouml >>>> Apply the diff >>>> Build with "./build.sh install" or "build.bat >>>> install" (in the argouml directory). >>>> Newly-built project appears in "argouml\build" >>>> Include the modules on the class path in the >>>> argouml.jar using "./build.sh update-argouml.jar-manifest" >>>> or "build.bat update-argouml.jar-manifest". >>>> >>>> The update-argouml.jar-manifest target adds all available >>>> modules to the class path. When doing releases, all modules >>>> are first built, ending up in argouml\build\ext and then >>>> the update-argouml.jar-manifest target is run to create the >>>> argouml.jar that is distributed. This magic is located in >>>> build.xml on the top level, a file that you didn't see when >>>> just checking out src and tools. >>>> >>>> To conclude, the problem is not with running in batch mode >>>> or commands. It is in the way you start argouml without the >>>> correct class path. >>>> >>>> If you don't want to use this magic you could set the >>>> classpath explicitly to java or edit the manifest file in >>>> the argouml.jar file you have created and add >>>> ext/argouml-diagrams-sequence.jar to the Class-Path: entry. >>>> >>>> /Linus >>>> >>>> >>>> >>>> On Mon, Apr 26, 2010 at 8:17 AM, Nathaniel Kofalt >>>> <[email protected] <mailto:[email protected]>> wrote: >>>> >>>> Hello all! >>>> >>>> We use a custom ArgoUML build (currently of 0.28.1) >>>> - essentially >>>> just a minor change by "thn" (revision 17025, see link >>>> below) that makes >>>> it possible to save all graphics from the command-line. >>>> Combined with a >>>> simple commit script, and now we have a SVN repository >>>> of ArgoUML >>>> projects that automatically generate pictures of >>>> themselves into a >>>> folder, which gets served over Apache. This allows us >>>> to have a >>>> browser-viewable set of images always showing the >>>> latest revision of the >>>> UML. This is very convenient for our team, and our main >>>> reason for using >>>> ArgoUML. >>>> >>>> The command we use is pretty vanilla, just open the >>>> project and >>>> export all in batch mode (put in your own locations at >>>> the ... marks): >>>> java -jar ...argouml.jar -batch -command >>>> "org.argouml.uml.ui.ActionOpenProject=....example.zargo" >>>> -command >>>> >>>> "org.argouml.uml.ui.ActionSaveAllGraphics=..../exampleEmptyFolder" >>>> >>>> And this works perfectly in most cases. However, >>>> any project with a >>>> Sequence diagram causes this exception: >>>> org.argouml.persistence.OpenException: >>>> java.lang.ClassNotFoundException: >>>> org.argouml.sequence2.diagram.UMLSequenceDiagram >>>> (plus a lengthy stack traced, attached to this email). >>>> >>>> Replicating this error is pretty easy: >>>> svn checkout >>>> >>>> http://argouml.tigris.org/svn/argouml/releases/VERSION_0_28_1/src >>>> argouml/src --username guest >>>> svn checkout >>>> >>>> http://argouml.tigris.org/svn/argouml/releases/VERSION_0_28_1/tools >>>> argouml/tools --username guest >>>> Apply the diff linked below (one file), easy >>>> enough to do manually >>>> Build project with >>>> "argouml\src\argouml-build\build.sh" or >>>> similar "build.bat" >>>> Newly-built project appears in >>>> "argouml\src\argouml-build\build" >>>> Use the java command above on any ArgoUML >>>> project without a >>>> Sequence diagram to see it generate PNG images for each >>>> diagram >>>> Use the java command above on any ArgoUML >>>> project with a >>>> Sequence diagram to see it fail >>>> >>>> The diff link: >>>> >>>> http://argouml.tigris.org/source/browse/argouml/trunk/src/argouml-app/src/org/argouml/uml/ui/ActionSaveAllGraphics.java?view=diff&r1=17024&r2=17025&pathrev=17025&diff_format=l >>>> >>>> <http://argouml.tigris.org/source/browse/argouml/trunk/src/argouml-app/src/org/argouml/uml/ui/ActionSaveAllGraphics.java?view=diff&r1=17024&r2=17025&pathrev=17025&diff_format=l> >>>> >>>> This seems strange, since presumably the only >>>> difference from the >>>> official releases is that tiny feature added (like 30 >>>> lines). To confuse >>>> matters, the class source it can't find >>>> (org.argouml.sequence2.diagram.UMLSequenceDiagram) >>>> clearly exists in the >>>> checkouts we build from (in the >>>> >>>> "argouml\src\argouml-core-diagrams-sequence2\src\org\argouml\sequence2\diagram" >>>> folder). >>>> >>>> For convenience I also attached the exact modified >>>> file, >>>> >>>> "argouml\src\argouml-app\src\org\argouml\uml\ui\ActionSaveAllGraphics.java" >>>> so you don't have to apply the diff manually. I am >>>> familiar with Java, >>>> but I'm confused since opening the project in GUI mode >>>> produces the same >>>> error, yet in the official builds I can open the >>>> project just fine. Am I >>>> doing some portion of the build process wrong? >>>> >>>> Any help is appreciated! >>>> >>>> Nathaniel Kofalt >>>> >>>> ------------------------------------------------------ >>>> >>>> http://argouml.tigris.org/ds/viewMessage.do?dsForumId=449&dsMessageId=2595638 >>>> >>>> <http://argouml.tigris.org/ds/viewMessage.do?dsForumId=449&dsMessageId=2595638> >>>> >>>> To unsubscribe from this discussion, e-mail: >>>> [[email protected] >>>> <mailto:[email protected]>]. >>>> >>>> >>> >>> > ------------------------------------------------------ http://argouml.tigris.org/ds/viewMessage.do?dsForumId=450&dsMessageId=2604298 To unsubscribe from this discussion, e-mail: [[email protected]]. To be allowed to post to the list contact the mailing list moderator, email: [[email protected]]
