Hello Thomas!
Great work with finding all these problems. I agree that the issue 6389 is
serious so I will not perform the release today. Instead I will attempt to
investigate a solution.
/Linus
2011/12/2 Thomas Neustupny <[email protected]>
> Hi,
>
> as promised I did some testing with beta 1. Looks good so far (overall),
> but I found some issues (only one is prio 2) and put them into issuezilla.
> (Much more time needed to test, but anyway...)
> Because I've got noth enough time, I didn't check for duplicates.
>
> Regards,
> Thomas
>
> P.S.: here is the raw data of what I've hacked into issuezilla, sorry no
> time to copy issue numbers here:
>
>
> Issue 6386: Name of template parameters for classes ignored in explorer
> and class property panel
>
> Steps to reproduce:
> 1. create a class
> 2. in its property panel, create a template parameter
> 3. select the template parameter in the explorer
> 4. enter a name for the template parameter
> 5. navigate to the class in the property panel
>
> The name is not shown in the explorer ("TemplateParameter:"), and also it
> is not shown in the classes property panel ("TP (unnamed
> TemplateParameter)"). But in the Source tab, the template parameter is
> correctly generated with its name.
>
>
>
> Issue 6387: Link to template parameter in class property panel is not
> navigable
>
> Steps to reproduce:
> 1. create a class
> 2. in its property panel, create a template parameter
>
> The created property panel is shown as a link in the classes property
> panel, but clicking on it does nothing.
>
>
>
> Issue 6388: Base class not available for classes that are base class of a
> classifier role in another seq/collab diagram
>
> Steps to reproduce:
> 1. create a class, give it a name
> 2. create a sequence diagram with a classifier role
> 3. add the class as a base to the classifier role
> 4. create another sequence diagram (or collaboration diagram) and another
> classifier role in it
>
> The second classifier role cannot have the same base class as the one in
> the other diagram.
>
> There is always a way to circumvent this, so I suggest to drop the
> restriction. It is more in the way then helpful, for a long time now.
>
>
> Issue 6389: Loading project fails when done several times
>
> Steps to reproduce:
> 1. Save a project and open it several times (3 or 4 times)
>
> Eventuall the following error happens:
> Cause : org.argouml.model.InvalidElementException:
> javax.jmi.reflect.InvalidObjectException: Object with MOFID
> 127-0-0-1-6981beab:133fdc310a0:-8000:0000000000000C55 no longer exists.
>
>
> Issue 6390: Guard and Effect too small in height when empty
>
> Steps to reproduce:
>
> 1. create a transition in a behavioral diagram
> 2. navigate to its property panel
>
> Guard and Effect fields are too small in height when empty. After adding
> something, the problem is gone. After removing, these fields are again too
> small in height.
>
>
>
> Issue 6391: Argument Prop panel shows exceptions (at least when it is for
> an action)
>
> Steps to reproduce:
> 1. in any behavioral diagram, create an action
> 2. add an argument in its property panel
>
> At the right hand of the Argument property panel, two Exceptions are
> shown: "Exception caught building a control list for ..."
> I found no way to fix this.
>
>
> Issue 6392: Deletion of a component thows excetion
>
> Steps to reproduce:
> 1. create a deployment diagram
> 2. create a node and make it large enough to hold a component
> 3. draw a component inside a node
> 4. delete the component with "Delete from model"
>
> Exception in console:
> org.argouml.model.InvalidElementException:
> javax.jmi.reflect.InvalidObjectException: Object with MOFID
> 127-0-0-1-6327304:133fe07ac97:-8000:0000000000000868 no longer exists.
> --
> NEU: FreePhone - 0ct/min Handyspartarif mit Geld-zurück-Garantie!
> Jetzt informieren: http://www.gmx.net/de/go/freephone
>
> ------------------------------------------------------
>
> http://argouml.tigris.org/ds/viewMessage.do?dsForumId=450&dsMessageId=2889991
>
> To unsubscribe from this discussion, e-mail: [
> [email protected]].
> To be allowed to post to the list contact the mailing list moderator,
> email: [[email protected]]
>
------------------------------------------------------
http://argouml.tigris.org/ds/viewMessage.do?dsForumId=450&dsMessageId=2890181
To unsubscribe from this discussion, e-mail:
[[email protected]].
To be allowed to post to the list contact the mailing list moderator, email:
[[email protected]]
