pastebin.com/aP5LBCEb On Jan 14, 2015 11:43 AM, "Michael Joyce" <jo...@apache.org> wrote:
> Yay, it worked. This is what we were looking for > > > 1. (ocw)nic@nic-Lenovo-IdeaPad-Z400-Touch:~/basemap-1.0.7$ python > 2. Python 2.7.6 |Anaconda 1.9.2 (64-bit)| (default, Jan 17 2014, > 10:13:17) > 3. [GCC 4.1.2 20080704 (Red Hat 4.1.2-54)] on linux2 > 4. Type "help", "copyright", "credits" or "license" for more > information. > 5. >>> from mpl_toolkits.basemap import Basemap > 6. >>> exit() > > > That's perfect. Try running the example that failed for you earlier and > see if it works now. We're getting close! > > > -- Joyce > > On Wed, Jan 14, 2015 at 11:39 AM, nicpeder...@gmail.com < > nicpeder...@gmail.com> wrote: > >> pastebin.com/JHzqPDXX >> >> I pasted as much as possible. >> >> Sent from my HTC phone. >> >> ----- Reply message ----- >> From: "Michael Joyce" <jo...@apache.org> >> To: "nic pederson" <nicpeder...@gmail.com> >> Cc: "dev@climate.apache.org" <dev@climate.apache.org>, " >> chris.a.mattm...@nasa.gov" <chris.a.mattm...@nasa.gov> >> Subject: New Student - Caltech-JPL Summer School on Big Data Analytics - >> Need Help Setting up OCW >> Date: Wed, Jan 14, 2015 11:17 AM >> >> Lots of text is good, or at least better than what we were getting =D >> >> Let's check to see if it actually did install with: >> >> python >> from mpl_toolkits.basemap import Basemap >> >> If that imports correctly then we're good. If it didn't then I'll have to >> look out the output from the install command to see where it died. >> >> If the above does work try running one of the examples so we can see if >> we managed to fix everything. >> >> >> -- Joyce >> >> On Wed, Jan 14, 2015 at 11:12 AM, nic pederson <nicpeder...@gmail.com> >> wrote: >> >>> That seemed to work :) there was a massive dump of copying going on. I >>> didn't see any errors. The last line run was >>> >>> customize UnixCCompiler >>> >>> ..Ok, I guess I should test the samples, but I'll wait for you to advise. >>> On Jan 14, 2015 10:58 AM, "Michael Joyce" <jo...@apache.org> wrote: >>> >>>> Actually I lied, I do have an idea. I just spoke with one of my >>>> coworkers who pointed out something to me. >>>> >>>> We're running "python setup.py install" as sudo, which means that we're >>>> probably ending up with roots python. Try the following: >>>> >>>> sudo /home/nic/climate/anaconda/bin/python setup.py install >>>> >>>> And let me know if that helps. >>>> >>>> >>>> -- Joyce >>>> >>>> On Wed, Jan 14, 2015 at 10:46 AM, Michael Joyce <jo...@apache.org> >>>> wrote: >>>> >>>>> Sigh, that is thoroughly confusing. I will try to replicate this when >>>>> I have some free time then. What version of Ubuntu are you using at the >>>>> moment? And what version of the code base are you using (0.4 or did you >>>>> grab the latest from master)? >>>>> >>>>> In the mean time, you might consider trying the VM to get everything >>>>> installed and running in an isolated environment for you. I'm really not >>>>> sure what to attempt at this point because I don't really know why it >>>>> wouldn't be finding numpy in that situation. There must be some config >>>>> problem somewhere but I can't for the life of me figure out what it might >>>>> be. >>>>> >>>>> Sorry I don't have better news. Maybe someone else on here will have >>>>> some insight where I don't. >>>>> >>>>> >>>>> -- Joyce >>>>> >>>>> On Wed, Jan 14, 2015 at 10:21 AM, nic pederson <nicpeder...@gmail.com> >>>>> wrote: >>>>> >>>>>> pastebin.com/kneXbeUJ >>>>>> On Jan 14, 2015 10:17 AM, "Michael Joyce" <jo...@apache.org> wrote: >>>>>> >>>>>>> Type >>>>>>> >>>>>>> exit() and then enter >>>>>>> >>>>>>> or control+D >>>>>>> >>>>>>> You're just stuck in the Python REPL. >>>>>>> >>>>>>> >>>>>>> -- Joyce >>>>>>> >>>>>>> On Wed, Jan 14, 2015 at 10:15 AM, nic pederson < >>>>>>> nicpeder...@gmail.com> wrote: >>>>>>> >>>>>>>> My command line starts with ">>>" >>>>>>>> >>>>>>>> How do I get out of that? >>>>>>>> On Jan 14, 2015 9:53 AM, "Michael Joyce" <jo...@apache.org> wrote: >>>>>>>> >>>>>>>>> Hrm ok. Good sign that we can import numpy. However, it makes no >>>>>>>>> sense that we end up with an import error. Try running the install >>>>>>>>> command >>>>>>>>> again and see what happens. Make sure you don't do it in a new >>>>>>>>> terminal or >>>>>>>>> anything. So do: >>>>>>>>> >>>>>>>>> which python >>>>>>>>> sudo python setup.py install >>>>>>>>> >>>>>>>>> from the basemap folder and post the output again if you could. >>>>>>>>> >>>>>>>>> >>>>>>>>> -- Joyce >>>>>>>>> >>>>>>>>> On Wed, Jan 14, 2015 at 9:39 AM, nic pederson < >>>>>>>>> nicpeder...@gmail.com> wrote: >>>>>>>>> >>>>>>>>>> pastebin.com/dDB1PVCz >>>>>>>>>> On Jan 14, 2015 9:31 AM, "Michael Joyce" <jo...@apache.org> >>>>>>>>>> wrote: >>>>>>>>>> >>>>>>>>>>> No problem. So to elaborate a bit for you. The problem that >>>>>>>>>>> killed the install when you ran it with sudo was >>>>>>>>>>> >>>>>>>>>>> "ImportError: No module named numpy" >>>>>>>>>>> >>>>>>>>>>> So when it tried to run setup.py something somewhere tried to >>>>>>>>>>> import the numpy library. Numpy is one of the OCW dependencies and >>>>>>>>>>> one of >>>>>>>>>>> the packages installed with Anaconda. So, if it was using the >>>>>>>>>>> Anaconda >>>>>>>>>>> Python it seems weird that it wouldn't be able to import numpy. >>>>>>>>>>> This is why >>>>>>>>>>> I thought it wasn't using the Anaconda Python and had you check >>>>>>>>>>> that. >>>>>>>>>>> However, `which python` seems to indicate that isn't the case. So to >>>>>>>>>>> confirm that we aren't crazy, run these 3 commands: >>>>>>>>>>> >>>>>>>>>>> which python >>>>>>>>>>> python >>>>>>>>>>> import numpy >>>>>>>>>>> >>>>>>>>>>> If that last command fails then it's time for us to be confused >>>>>>>>>>> =) >>>>>>>>>>> >>>>>>>>>>> Hopefully that helps! >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> -- Joyce >>>>>>>>>>> >>>>>>>>>>> On Wed, Jan 14, 2015 at 9:21 AM, nic pederson < >>>>>>>>>>> nicpeder...@gmail.com> wrote: >>>>>>>>>>> >>>>>>>>>>>> I'm not sure I know what you mean by that. How do I run python >>>>>>>>>>>> and import bumpy? I apologize for my command line naivety. >>>>>>>>>>>> >>>>>>>>>>>> Nic >>>>>>>>>>>> On Jan 14, 2015 9:10 AM, "Michael Joyce" <jo...@apache.org> >>>>>>>>>>>> wrote: >>>>>>>>>>>> >>>>>>>>>>>>> And if you run python and import numpy it does or doesn't >>>>>>>>>>>>> fail? If it's pointing to the Anaconda python when you ran the >>>>>>>>>>>>> other >>>>>>>>>>>>> command I'm not really sure why it would fail on a numpy import =/ >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> -- Joyce >>>>>>>>>>>>> >>>>>>>>>>>>> On Wed, Jan 14, 2015 at 8:57 AM, nicpeder...@gmail.com < >>>>>>>>>>>>> nicpeder...@gmail.com> wrote: >>>>>>>>>>>>> >>>>>>>>>>>>>> Output of which python is >>>>>>>>>>>>>> >>>>>>>>>>>>>> /home/nic/climate/anaconda/bin//python >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> Sent from my HTC phone. >>>>>>>>>>>>>> >>>>>>>>>>>>>> ----- Reply message ----- >>>>>>>>>>>>>> From: "Michael Joyce" <jo...@apache.org> >>>>>>>>>>>>>> To: "nic pederson" <nicpeder...@gmail.com> >>>>>>>>>>>>>> Cc: "dev@climate.apache.org" <dev@climate.apache.org>, " >>>>>>>>>>>>>> chris.a.mattm...@nasa.gov" <chris.a.mattm...@nasa.gov> >>>>>>>>>>>>>> Subject: New Student - Caltech-JPL Summer School on Big Data >>>>>>>>>>>>>> Analytics - Need Help Setting up OCW >>>>>>>>>>>>>> Date: Wed, Jan 14, 2015 8:47 AM >>>>>>>>>>>>>> >>>>>>>>>>>>>> Ok the second one leads me to believe that the wrong Python >>>>>>>>>>>>>> is getting used. Can you check that 'python' really is the >>>>>>>>>>>>>> anaconda python >>>>>>>>>>>>>> where numpy would be installed? Namely, what is the output of >>>>>>>>>>>>>> `which >>>>>>>>>>>>>> python` and can you manually run python and import numpy without >>>>>>>>>>>>>> an error? >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> -- Joyce >>>>>>>>>>>>>> >>>>>>>>>>>>>> On Wed, Jan 14, 2015 at 8:39 AM, nic pederson < >>>>>>>>>>>>>> nicpeder...@gmail.com> wrote: >>>>>>>>>>>>>> >>>>>>>>>>>>>>> It didn't seem to like it. I also tried with sudo since it >>>>>>>>>>>>>>> gave permission errors. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> pastebin.com/LDbpgvWu >>>>>>>>>>>>>>> On Jan 14, 2015 8:29 AM, "Michael Joyce" <jo...@apache.org> >>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> No it shouldn't matter where it's at. Was mostly just >>>>>>>>>>>>>>>> guessing where it might be off the top of my head to be honest >>>>>>>>>>>>>>>> =) >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> -- Joyce >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> On Wed, Jan 14, 2015 at 8:26 AM, nicpeder...@gmail.com < >>>>>>>>>>>>>>>> nicpeder...@gmail.com> wrote: >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> The basemap folder is in my home directory. Should I move >>>>>>>>>>>>>>>>> it first? >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Nic >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Sent from my HTC phone. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> ----- Reply message ----- >>>>>>>>>>>>>>>>> From: "Michael Joyce" <jo...@apache.org> >>>>>>>>>>>>>>>>> To: "nicpeder...@gmail.com" <nicpeder...@gmail.com> >>>>>>>>>>>>>>>>> Cc: "dev@climate.apache.org" <dev@climate.apache.org>, " >>>>>>>>>>>>>>>>> chris.a.mattm...@nasa.gov" <chris.a.mattm...@nasa.gov> >>>>>>>>>>>>>>>>> Subject: New Student - Caltech-JPL Summer School on Big >>>>>>>>>>>>>>>>> Data Analytics - Need Help Setting up OCW >>>>>>>>>>>>>>>>> Date: Wed, Jan 14, 2015 6:47 AM >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Ok, that looks good. GEOS seems to have installed fine. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> If you go back into the directory where the install script >>>>>>>>>>>>>>>>> downloaded basemap we can try to do the install again. >>>>>>>>>>>>>>>>> It should be something like >>>>>>>>>>>>>>>>> /path/to/climate/easy-ocw/basemap-1.0.7 >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Then using the Anaconda Python (be sure to check and make >>>>>>>>>>>>>>>>> sure it's not the system Python or the virtualenv Python with >>>>>>>>>>>>>>>>> `which >>>>>>>>>>>>>>>>> python`) run: >>>>>>>>>>>>>>>>> python setup.py install >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Then try the above basemap import to check the install. Go >>>>>>>>>>>>>>>>> ahead and post the install output here as well in case we >>>>>>>>>>>>>>>>> need to debug >>>>>>>>>>>>>>>>> something. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> -- Joyce >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> On Tue, Jan 13, 2015 at 2:36 PM, nicpeder...@gmail.com < >>>>>>>>>>>>>>>>> nicpeder...@gmail.com> wrote: >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Basemap test - output. >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> pastebin.com/rrAzxHMu >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Nic >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> ----- Reply message ----- >>>>>>>>>>>>>>>>>> From: "Michael Joyce" <jo...@apache.org> >>>>>>>>>>>>>>>>>> To: "nic pederson" <nicpeder...@gmail.com> >>>>>>>>>>>>>>>>>> Cc: "dev@climate.apache.org" <dev@climate.apache.org>, " >>>>>>>>>>>>>>>>>> chris.a.mattm...@nasa.gov" <chris.a.mattm...@nasa.gov> >>>>>>>>>>>>>>>>>> Subject: New Student - Caltech-JPL Summer School on Big >>>>>>>>>>>>>>>>>> Data Analytics - Need Help Setting up OCW >>>>>>>>>>>>>>>>>> Date: Tue, Jan 13, 2015 1:04 PM >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> So, semi-good news is that you're helping me find some >>>>>>>>>>>>>>>>>> small bugs in the install script but unfortunately they're >>>>>>>>>>>>>>>>>> not what's >>>>>>>>>>>>>>>>>> causing your problem =) >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> However, I also realized that I told you something wrong >>>>>>>>>>>>>>>>>> earlier. I told you to run >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> sudo echo "export >>>>>>>>>>>>>>>>>> PATH=\"/home/nic/climate/anaconda/bin/:$PATH\"" >>>>>>>>>>>>>>>>>> >> ocw/bin/activate >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> but that isn't going to do what we want. We're running >>>>>>>>>>>>>>>>>> the echo command with elevated privileges but we really want >>>>>>>>>>>>>>>>>> to do the >>>>>>>>>>>>>>>>>> concat with elevated perms. >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> echo "export PATH=\"/home/nic/climate/anaconda/bin/:$PATH\"" >>>>>>>>>>>>>>>>>> | sudo tee ocw/bin/activate >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> You could also put quotes around the original command I >>>>>>>>>>>>>>>>>> gave you (sudo " ... ") but that can get messy with the >>>>>>>>>>>>>>>>>> other quotes for >>>>>>>>>>>>>>>>>> the echo. You could also edit the file manually with nano >>>>>>>>>>>>>>>>>> (assuming it's >>>>>>>>>>>>>>>>>> installed) with `sudo nano /path/to/file`. But try the above >>>>>>>>>>>>>>>>>> and hopefully >>>>>>>>>>>>>>>>>> that'll work for you. >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Now, we have hopefully fixed the first issue but not the >>>>>>>>>>>>>>>>>> second issue. >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> If it can't find basemap that means that the installation >>>>>>>>>>>>>>>>>> for it died somewhere. Unfortunately the install_log isn't >>>>>>>>>>>>>>>>>> helping (one of >>>>>>>>>>>>>>>>>> those bugs I mentioned) so we might need to debug manually. >>>>>>>>>>>>>>>>>> First thing to >>>>>>>>>>>>>>>>>> test is that basemap really can't be found and it's not a >>>>>>>>>>>>>>>>>> bug in the script. >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Try the following in a Python prompt: >>>>>>>>>>>>>>>>>> from mpl_toolkits.basemap import Basemap >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> This is the test they use in the actual basemap docs to >>>>>>>>>>>>>>>>>> test an install. So if that doesn't work then basemap >>>>>>>>>>>>>>>>>> definitely isn't >>>>>>>>>>>>>>>>>> installed and it wasn't a problem with the *.py script you >>>>>>>>>>>>>>>>>> ran to test OCW. >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> If the above failed, let's check to see if Geos got >>>>>>>>>>>>>>>>>> installed. Geos is a dependency for basemap that the install >>>>>>>>>>>>>>>>>> script handles >>>>>>>>>>>>>>>>>> first. Run the following >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> ls /usr/local/lib | grep geos >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> You should see some output. If you didn't then we need to >>>>>>>>>>>>>>>>>> install Geos manually. Luckily we can mostly just copy the >>>>>>>>>>>>>>>>>> install script >>>>>>>>>>>>>>>>>> verbatim and see if something breaks. There's a section in >>>>>>>>>>>>>>>>>> the >>>>>>>>>>>>>>>>>> install-ubuntu.sh script with a comment that says "#Install >>>>>>>>>>>>>>>>>> GEOS" that has >>>>>>>>>>>>>>>>>> the commands. Otherwise we need to run the next part for >>>>>>>>>>>>>>>>>> basemap. However, >>>>>>>>>>>>>>>>>> before you do either of those installs, let me know what the >>>>>>>>>>>>>>>>>> outputs from >>>>>>>>>>>>>>>>>> the above commands say and let me know if the new attempt at >>>>>>>>>>>>>>>>>> appending text >>>>>>>>>>>>>>>>>> works. >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> We will get there eventually, stick with it =) >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> -- Joyce >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> On Tue, Jan 13, 2015 at 12:36 PM, nic pederson < >>>>>>>>>>>>>>>>>> nicpeder...@gmail.com> wrote: >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> It did seem to band aid that part, but now it can't find >>>>>>>>>>>>>>>>>>> baseman. Here's the terminal. >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> pastebin.com/BSgt7BwW >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Nic >>>>>>>>>>>>>>>>>>> On Jan 13, 2015 12:07 PM, "Michael Joyce" < >>>>>>>>>>>>>>>>>>> jo...@apache.org> wrote: >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> One more thing to try (and I suspect it would band-aid >>>>>>>>>>>>>>>>>>>> the problem): >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> Start up the virtualenv, run the following command, and >>>>>>>>>>>>>>>>>>>> see if you can find the packages now. >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> export PATH="/home/nic/climate/anaconda/bin/:$PATH" >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> That's effectively what we're trying to get it to do by >>>>>>>>>>>>>>>>>>>> editing the script, but it's not cooperating with us. That >>>>>>>>>>>>>>>>>>>> should make it >>>>>>>>>>>>>>>>>>>> work, but you would have to do it every time you start up >>>>>>>>>>>>>>>>>>>> the environment >>>>>>>>>>>>>>>>>>>> which is terribly tedious. It also doesn't address the >>>>>>>>>>>>>>>>>>>> actual problem and >>>>>>>>>>>>>>>>>>>> that annoys me =D >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> -- Joyce >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> On Tue, Jan 13, 2015 at 12:02 PM, Michael Joyce < >>>>>>>>>>>>>>>>>>>> jo...@apache.org> wrote: >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> Hrm ok. That's even more strange. >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> So the -e flag tells the script that you want it to >>>>>>>>>>>>>>>>>>>>> install virtualenv (if necessary), make a new virtualenv >>>>>>>>>>>>>>>>>>>>> named 'ocw', and >>>>>>>>>>>>>>>>>>>>> install some of the dependencies into there (namely the >>>>>>>>>>>>>>>>>>>>> dependencies not >>>>>>>>>>>>>>>>>>>>> installed by Anaconda). If you didn't pass this flag, it >>>>>>>>>>>>>>>>>>>>> will have >>>>>>>>>>>>>>>>>>>>> installed the dependencies into your system python. From >>>>>>>>>>>>>>>>>>>>> what I can tell >>>>>>>>>>>>>>>>>>>>> you probably did pass this flag? It doesn't really >>>>>>>>>>>>>>>>>>>>> matter, or at least >>>>>>>>>>>>>>>>>>>>> shouldn't. It's generally a good idea to not pollute the >>>>>>>>>>>>>>>>>>>>> system Python as >>>>>>>>>>>>>>>>>>>>> it can make your life a bit more difficult in the future >>>>>>>>>>>>>>>>>>>>> when dealing with >>>>>>>>>>>>>>>>>>>>> other Python dependencies/packages. >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> There's an install log that gets written when running >>>>>>>>>>>>>>>>>>>>> the script. Can you look for a file called "install_log" >>>>>>>>>>>>>>>>>>>>> in the >>>>>>>>>>>>>>>>>>>>> climate/easy-ocw/ folder and post the output? That will >>>>>>>>>>>>>>>>>>>>> help us debug this >>>>>>>>>>>>>>>>>>>>> whenever I find a few spare minutes to take a look. >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> -- Joyce >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> On Tue, Jan 13, 2015 at 11:28 AM, nic pederson < >>>>>>>>>>>>>>>>>>>>> nicpeder...@gmail.com> wrote: >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> Here's a link to what happens in terminal when I try >>>>>>>>>>>>>>>>>>>>>> that command... It doesn't ask for a password >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> pastebin.com/hcMNqWAa >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> Also, when I'm installing ocw originally, am I >>>>>>>>>>>>>>>>>>>>>> supposed to use the -e tag at the end of the command >>>>>>>>>>>>>>>>>>>>>> that executes the >>>>>>>>>>>>>>>>>>>>>> installation? Would that potentially cause these errors? >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> Nic >>>>>>>>>>>>>>>>>>>>>> On Jan 13, 2015 10:51 AM, "Michael Joyce" < >>>>>>>>>>>>>>>>>>>>>> jo...@apache.org> wrote: >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> @Carl, absolutely. Once I figure out when I'll have >>>>>>>>>>>>>>>>>>>>>>> some time for a meeting I'll send out an email here so >>>>>>>>>>>>>>>>>>>>>>> anyone can >>>>>>>>>>>>>>>>>>>>>>> participate. Always happy to have more people stop by. >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> @Nic The odd thing about what I'm seeing is that all >>>>>>>>>>>>>>>>>>>>>>> the files for virtualenv are owned by root. Perhaps >>>>>>>>>>>>>>>>>>>>>>> even more strange is >>>>>>>>>>>>>>>>>>>>>>> that even if that is the case, running `echo "export >>>>>>>>>>>>>>>>>>>>>>> PATH=\"/home/nic/climate/anaconda/bin/:$PATH\"" >> >>>>>>>>>>>>>>>>>>>>>>> ocw/bin/activate` (without the `'s of course) should >>>>>>>>>>>>>>>>>>>>>>> work just fine. Is it >>>>>>>>>>>>>>>>>>>>>>> possible that the password you typed for sudo was >>>>>>>>>>>>>>>>>>>>>>> incorrect? >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> @Both of you, something that may help you get up and >>>>>>>>>>>>>>>>>>>>>>> running potentially faster would be to use the VM. We >>>>>>>>>>>>>>>>>>>>>>> have instructions on >>>>>>>>>>>>>>>>>>>>>>> how to build the VM for you on our wiki. Consider >>>>>>>>>>>>>>>>>>>>>>> checking that out at [1] >>>>>>>>>>>>>>>>>>>>>>> as well while we try to figure out this problem, >>>>>>>>>>>>>>>>>>>>>>> especially if getting >>>>>>>>>>>>>>>>>>>>>>> something up and running urgently is key. >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> [1] >>>>>>>>>>>>>>>>>>>>>>> https://cwiki.apache.org/confluence/display/CLIMATE/OCW+VM+-+A+Self+Contained+OCW+Environment >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> -- Joyce >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> On Tue, Jan 13, 2015 at 9:00 AM, >>>>>>>>>>>>>>>>>>>>>>> nicpeder...@gmail.com <nicpeder...@gmail.com> wrote: >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> I'm with you on it being weird. Ok. Here's a link >>>>>>>>>>>>>>>>>>>>>>>> to that output >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> pastebin.com/rA4P7eCh >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> I'm not working on a VM. And the network is my own. >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> Thanks, >>>>>>>>>>>>>>>>>>>>>>>> Nic >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> Sent from my HTC phone. >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> ----- Reply message ----- >>>>>>>>>>>>>>>>>>>>>>>> From: "Michael Joyce" <jo...@apache.org> >>>>>>>>>>>>>>>>>>>>>>>> To: "nic pederson" <nicpeder...@gmail.com> >>>>>>>>>>>>>>>>>>>>>>>> Cc: "chris.a.mattm...@nasa.gov" < >>>>>>>>>>>>>>>>>>>>>>>> chris.a.mattm...@nasa.gov>, "dev@climate.apache.org" >>>>>>>>>>>>>>>>>>>>>>>> <dev@climate.apache.org> >>>>>>>>>>>>>>>>>>>>>>>> Subject: New Student - Caltech-JPL Summer School on >>>>>>>>>>>>>>>>>>>>>>>> Big Data Analytics - Need Help Setting up OCW >>>>>>>>>>>>>>>>>>>>>>>> Date: Tue, Jan 13, 2015 7:34 AM >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> More than happy to do a google hangout or something >>>>>>>>>>>>>>>>>>>>>>>> similar to try to resolve any issues you're having. >>>>>>>>>>>>>>>>>>>>>>>> Today is jam packed for >>>>>>>>>>>>>>>>>>>>>>>> me unfortunately so it would have to be a different >>>>>>>>>>>>>>>>>>>>>>>> day. Perhaps someone >>>>>>>>>>>>>>>>>>>>>>>> else will be able to help though. >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> I find it odd that you're running into permission >>>>>>>>>>>>>>>>>>>>>>>> problems here. Are you running this in a VM or on a >>>>>>>>>>>>>>>>>>>>>>>> local system that you >>>>>>>>>>>>>>>>>>>>>>>> have control off? I'm not really sure why you wouldn't >>>>>>>>>>>>>>>>>>>>>>>> be able to edit >>>>>>>>>>>>>>>>>>>>>>>> something in your home dir unless root wrote >>>>>>>>>>>>>>>>>>>>>>>> something. Can you run "ls -l" >>>>>>>>>>>>>>>>>>>>>>>> on the ocw/bin directory and link the output? >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> -- Joyce >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> On Mon, Jan 12, 2015 at 10:07 PM, nic pederson < >>>>>>>>>>>>>>>>>>>>>>>> nicpeder...@gmail.com> wrote: >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> Can we do a team viewer or some other remote >>>>>>>>>>>>>>>>>>>>>>>>> control? I am feeling a little deflated. >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> N >>>>>>>>>>>>>>>>>>>>>>>>> On Jan 12, 2015 9:07 PM, "nic pederson" < >>>>>>>>>>>>>>>>>>>>>>>>> nicpeder...@gmail.com> wrote: >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> When I run it from the easy-ocw folder, is says >>>>>>>>>>>>>>>>>>>>>>>>>> permission denied. When I run it with sudo, it says >>>>>>>>>>>>>>>>>>>>>>>>>> the same thing... >>>>>>>>>>>>>>>>>>>>>>>>>> On Jan 12, 2015 8:51 PM, "nic pederson" < >>>>>>>>>>>>>>>>>>>>>>>>>> nicpeder...@gmail.com> wrote: >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> It returns: >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> bash: ocw/bin/activate: No such file or directory >>>>>>>>>>>>>>>>>>>>>>>>>>> On Jan 12, 2015 8:35 PM, "Michael Joyce" < >>>>>>>>>>>>>>>>>>>>>>>>>>> jo...@apache.org> wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> Try running the above command instead of using >>>>>>>>>>>>>>>>>>>>>>>>>>>> gedit. If it gives you permission denied try >>>>>>>>>>>>>>>>>>>>>>>>>>>> prepending "sudo " to the >>>>>>>>>>>>>>>>>>>>>>>>>>>> command and typing your admin password when >>>>>>>>>>>>>>>>>>>>>>>>>>>> prompted. >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> -- Joyce >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> On Mon, Jan 12, 2015 at 8:23 PM, nic pederson < >>>>>>>>>>>>>>>>>>>>>>>>>>>> nicpeder...@gmail.com> wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Ok. Opened it in gedit. Added the line to the >>>>>>>>>>>>>>>>>>>>>>>>>>>>> end, but it won't let me save. Says it's read only >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> N >>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Jan 12, 2015 8:14 PM, "Michael Joyce" < >>>>>>>>>>>>>>>>>>>>>>>>>>>>> jo...@apache.org> wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> You could use an editor such as nano (not >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> sure if this would be installed), emacs or vim >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> (both of which would be >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> potentially challenging for you to use most >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> likely). >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> You should be able to run the following. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> echo "export >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> PATH=\"/home/nic/climate/anaconda/bin/:$PATH\"" >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >> ocw/bin/activate >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ">>" redirects input to the supplied output >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> file. In this case the input is the result of >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> running >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> echo "export PATH=\"/home/nic/climate/ >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> anaconda/bin/:$PATH\"" >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> which is simply >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> export PATH="/home/nic/climate/ >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> anaconda/bin/:$PATH" >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> And the output file is the activate script >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> that we want to adjust. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hopefully that helps a bit. If it doesn't >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> work let me know. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> -- Joyce >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Mon, Jan 12, 2015 at 8:09 PM, nic pederson >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> <nicpeder...@gmail.com> wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I didn't add the line above because I'm not >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> quite sure how. How do I edit the activate file? >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Jan 12, 2015 8:03 PM, "Michael Joyce" < >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> jo...@apache.org> wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> That is the virtualenv one. The anaconda >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> one should be >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> /home/nic/climate/anaconda/bin/python. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Note that if you added that line above you >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> will need to deactivate and >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> reactivate the virtualenv for it to take >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> effect. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> If you want to test manually what I >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> mentioned above you could try >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 0. Deactivate the virtualenv (just to be >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> safe) >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 1. initialize the virtualenv >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2. run `export PATH="/home/nic/climate/ >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> anaconda/bin/:$PATH"` >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 3. run `which python` and see what you get >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> -- Joyce >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Mon, Jan 12, 2015 at 7:55 PM, nic >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> pederson <nicpeder...@gmail.com> wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Which python produces >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ~/climate/easy/easy-ocw/ocw/bin/python >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Jan 12, 2015 7:42 PM, "Michael Joyce" < >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> jo...@apache.org> wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Ok not quite as confident now as I >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> thought but try this. I think you might be >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> running into an annoying little >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> bug and/or a gap in the documentation here. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Try adding this to the end of >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> your ocw/bin/activate file and see if that >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> fixes this. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 1. export >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> PATH=/home/nic/climate/anaconda/bin:$PATH >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I think we're missing an export of a path >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> in the install script when you run a >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> virtualenv and it's causing the wrong >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> python to be called. You can check by >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> running "which python" and see if you >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> get the anaconda one or the virtualenv one. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> You want to be getting the >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> anaconda one. Hopefully that's the >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> problem/solution. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> -- Joyce >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Mon, Jan 12, 2015 at 7:33 PM, Michael >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Joyce <jo...@apache.org> wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Ah ok I think I know what the problem >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> is. One second to check and see. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> -- Joyce >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Mon, Jan 12, 2015 at 7:25 PM, nic >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> pederson <nicpeder...@gmail.com> wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Here is my bash >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Pastebin.com/7ULyyng3 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Jan 12, 2015 7:12 PM, "Michael >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Joyce" <jo...@apache.org> wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Trying running source ocw/bin/activate >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> from ~/climate/easy-ocw and see if that >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> works >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> -- Joyce >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Mon, Jan 12, 2015 at 7:10 PM, nic >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> pederson <nicpeder...@gmail.com> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> "source activate" when in >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ~/climate/easy-ocw/ocw/bin >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Jan 12, 2015 7:05 PM, "Michael >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Joyce" <jo...@apache.org> wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hey Nic, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> What command are you using to start >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> the environment? >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> -- Joyce >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Mon, Jan 12, 2015 at 7:00 PM, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> nicpeder...@gmail.com < >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> nicpeder...@gmail.com> wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi guys, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I was still having trouble, so just >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> did a fresh install of ubuntu. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Everything went fine until I tried to >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> activate OCW. I get an error that says >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> "error: no environment provided" >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thanks again >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Nic >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Sent from my HTC phone. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ----- Reply message ----- >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> From: "Michael Joyce" < >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> jo...@apache.org> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> To: "nic pederson" < >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> nicpeder...@gmail.com> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Cc: "dev@climate.apache.org" < >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> dev@climate.apache.org>, " >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> chris.a.mattm...@nasa.gov" < >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> chris.a.mattm...@nasa.gov> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Subject: New Student - Caltech-JPL >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Summer School on Big Data Analytics - >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Need Help Setting up OCW >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Date: Mon, Jan 12, 2015 2:32 PM >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> You should be able to run "rm -r >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> /home/nic/Learning/climate/anaconda" >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> (without quotes and make sure I >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> actually got that directory correct ;) >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Then you should be able to run the >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Anaconda script the same way the >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> install-ubuntu.sh script does. Namely: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> bash Anaconda-1.9.2-Linux-x86_64.sh >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> That .sh file should still be in >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> the easy-ocw folder (assuming you ran >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ./install-ubuntu.sh from >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> /climate/easy-ocw/). When you go >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> through the install just make sure you >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> put >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> the directory where you want it >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> instead of the default. From above I >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> think >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> you'll want: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> /home/nic/Learning/climate/ >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> If you get stuck let us know! >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> -- Joyce >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Mon, Jan 12, 2015 at 2:08 PM, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> nic pederson <nicpeder...@gmail.com >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thanks for looking. That's exactly >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> what I did... What as the best way to >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> wipe/reinstall? Im fairly new to >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Linux and command line in general. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Nic >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Jan 12, 2015 1:51 PM, "Michael >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Joyce" <jo...@apache.org> wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Ok after looking around a bit and >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> checking your RC my guess is that >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> you did something along the lines of: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Ran install-ubuntu.sh >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Decided to move where Anaconda >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> was installed by cp-ing (or >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> something) it somewhere else >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ... >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Ended up where we're at >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> If that is the case then I think >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> your problem is that you can't move >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Anaconda around after the initial >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> install. If you want it in a >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> different place you'll need to do >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> that at >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> install-time. Check this convo [1] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> for a bit more info. Basically just >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> reinstall Anaconda where you want it >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> and blow out the old install just to >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> be safe. The install script forces >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> you to install it in the default >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> location. Patches are more than >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> welcome to fix this ;) >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> If that's not what you did then >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> what did you do. Maybe a bit more >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> info will get us pointed in the right >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> direction =) >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> You can also remove the following >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> line from your RC. This looks like >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> an input error when running >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> install-ubuntu.sh >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 1. export >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> PYTHONPATH=~Learning/climate/easy-owc/install-ubuntu.sh:~Learning/climate/easy-owc/ >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> install-ubuntu.sh/ocw >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [1] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> https://groups.google.com/a/continuum.io/forum/#!msg/anaconda/LcaXE25qElM/VKWYghrjb98J >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> -- Joyce >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Mon, Jan 12, 2015 at 1:23 PM, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> nicpeder...@gmail.com < >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> nicpeder...@gmail.com> wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> .bashrc >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> pastebin.com/P4Ux1XJm >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> "conda info" >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> bash: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> /home/nic/Learning/climate/anaconda/bin/conda: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> /home/nic/anaconda/bin/python: bad >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> interpreter: no such file or >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> directory >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Sent from my HTC phone. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ----- Reply message ----- >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> From: "Michael Joyce" < >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> jo...@apache.org> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> To: "nic pederson" < >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> nicpeder...@gmail.com> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Cc: "dev@climate.apache.org" < >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> dev@climate.apache.org>, " >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> chris.a.mattm...@nasa.gov" < >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> chris.a.mattm...@nasa.gov> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Subject: New Student - >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Caltech-JPL Summer School on Big >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Data Analytics - Need Help Setting >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> up OCW >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Date: Mon, Jan 12, 2015 12:58 PM >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Mkay. Can you please post your >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> entire bashrc (pastebin link would >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> probably be best) and the output of >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> "conda info"? It doesn't seem to be >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> cooperating with regards to where it >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> should look for conda packages. I'm >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> thinking there's some residual >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> config >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> from a previous install or I'm >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> forgetting something really >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> obvious. Worst >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> case we might need to blow out the >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> entire Anaconda install and redo it >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> (FUN!). Hopefully it's just >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> something stupid in a config >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> somewhere we can >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> update. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> -- Joyce >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Mon, Jan 12, 2015 at 12:51 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> PM, nic pederson < >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> nicpeder...@gmail.com> wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> /home/nic/Learning/climate/anaconda/bin/conda >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Jan 12, 2015 12:47 PM, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> "Michael Joyce" < >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> jo...@apache.org> wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Strange. When you run "which >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> conda" what do you see? >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> -- Joyce >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Mon, Jan 12, 2015 at 12:40 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> PM, nic pederson < >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> nicpeder...@gmail.com> wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> That did it! Except now I >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> cannot activate OWC. When I >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> activate, I get a line like: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> bash: (correct >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> path)/climate/anaconda/bin/conda: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> /home/nic/anaconda/bin/python: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> bad >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> interpreter: no such file or >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> directory >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thanks again for your help. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Nic >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Jan 12, 2015 12:08 PM, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> "Michael Joyce" < >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> jo...@apache.org> wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> No problem Nic, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> You should have a line in >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> your bashrc similar to the >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> following. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> export >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> PATH=~/Anaconda/bin:$PATH >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> If you replace the assumed >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> path with the location where >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Anaconda actually is you should >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> be golden. If >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> that doesn't fix if for you >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> though let us know. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> -- Joyce >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Mon, Jan 12, 2015 at >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 12:00 PM, nic pederson < >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> nicpeder...@gmail.com> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thanks guys! That sounds >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> about right. The missing >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> module is numpy when owc is >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> activated. (It's >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> filenames when it's >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> deactivated)... Also, I feel >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> like I may have made a bit >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> of a mess of the file >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> structure in trying to >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> move/reinstall Anaconda a >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> couple times. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thanks for all your help. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Nic >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Jan 12, 2015 11:23 AM, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> "Michael Joyce" < >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> jo...@apache.org> wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Nic (and Chris), >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I'm guessing from your >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> question that you are >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> installing onto Ubuntu with >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> the last release of OCW >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> (0.4). You should be fine on >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 14.10, the old scripts were >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> only tested on >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 12.04 so we list that >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> explicitly. Of course there >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> is still a possibility >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> that you might run into some >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> problems. If you're pulling >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> off the latest >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> master then the Ubuntu script >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> is tested on 12.04 and 14.04. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> What modules >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> are failing for you? If it's >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> something like numpy/scipy >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> then you probably >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> have an issue with the >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> location of the Anaconda bin >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> and your path. This >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> could be a result of Anaconda >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> being installed in a >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> different spot than >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> expected or it could be a bug >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> in the install scripts. If >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> you're having >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> problems with some OCW >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> modules not importing then it >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> probably a problem >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> with the PYTHONPATH not being >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> set as expected. Let us know >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> what problems >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> you're seeing and I'm sure we >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> can get it sorted quickly. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> -- Joyce >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Mon, Jan 12, 2015 at >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 8:10 AM, Mattmann, Chris A >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> (3980) >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> < >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> chris.a.mattm...@jpl.nasa.gov >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Nic, thanks for your >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> question and am forwarding >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> to the Apache >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> OCW list for some more >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> help! >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Cheers, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Chris >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Chris Mattmann, Ph.D. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Chief Architect >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Instrument Software and >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Science Data Systems Section >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> (398) >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> NASA Jet Propulsion >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Laboratory Pasadena, CA >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 91109 USA >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Office: 168-519, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Mailstop: 168-527 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Email: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> chris.a.mattm...@nasa.gov >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> WWW: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://sunset.usc.edu/~mattmann/ >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Adjunct Associate >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Professor, Computer Science >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Department >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> University of Southern >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> California, Los Angeles, CA >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 90089 USA >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> -----Original Message----- >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> From: Nic < >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> nicpeder...@gmail.com> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Date: Monday, January 12, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2015 at 8:08 AM >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> To: Chris Mattmann < >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> chris.a.mattm...@nasa.gov >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Subject: New Student - >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Caltech-JPL Summer School on >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Big Data Analytics - >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Need Help Setting up OCW >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >Hi Chris! >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >I'm really excited for >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> this class, but I'm a little >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> hung up on Day 1 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >installations. Long >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> story short, I've setup >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> PyLint and OCW, but OCW >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >seems to be unable to >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> find some modules. Could >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> this be because I >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >installed files (i >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> suspect anaconda) in the >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> wrong folders? >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >I'm running Ubuntu 14.10 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> (Lenovo IdeaPad). I noticed >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> that OCW install >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >instructions say that I >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> should be running 12.04. I >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> have 14.10 installed. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >I'm trying to wipe and >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> restart Ubuntu with 12.04 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> now, but am having >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >trouble getting it to >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> boot. Can I run 14.10 with >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> OCW? >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >I've checked the >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> discussion boards and have >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> done a bit of research >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >already, but not much >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> fruit. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >Thanks so much and I >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> look forward to hearing from >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> you, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >Nic Pederson >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >541.953.1520 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >@nicpederson >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>> >>>>>>>>> >>>>>>> >>>>> >>>> >> >
