The default tty linux is preinstalled inside devcloud VM, so at least, there is one user VM template is available. But downloading a new template won't work. For better network support, you may need to try devcloud-kvm: https://cwiki.apache.org/CLOUDSTACK/devcloud-kvm.html
> -----Original Message----- > From: Kausal Malladi [mailto:mkau...@gmail.com] > Sent: Friday, March 22, 2013 1:54 PM > To: dev@cloudstack.apache.org > Subject: Re: Issue regarding SSVM on DevCloud > > Then how can the template be downloaded if I am not able to connect to > internet from SSVM? > > Thanks. > Kausal Malladi > www.kausalmalladi.tk > > > On Sat, Mar 23, 2013 at 2:07 AM, Edison Su <edison...@citrix.com> wrote: > > > > > >> -----Original Message----- > >> From: Kausal Malladi [mailto:mkau...@gmail.com] > >> Sent: Friday, March 22, 2013 12:36 PM > >> To: cloudstack-...@incubator.apache.org > >> Subject: Issue regarding SSVM on DevCloud > >> > >> Hi, > >> I was able to create a zone and configure it successfully. But have > >> problem with IP Configuration of SSVM on my DevCloud. > >> I am running Management Server on my laptop. > >> Please see the following config and let me know where I am going wrong. > >> My IP:192.168.12.X > >> VirtualBox Network interface is 192.168.56.1 DevCloud IP is > >> 192.168.56.10 I am able to ping back and forth DevCloud and my machine. > >> Now, SSVM has the Link Local IP 169.254.1.17 (which changes every time). > >> In the interface it displays a different private IP (192.168.56.100) > >> and public IP > >> (192.168.56.108) apart from Link Local IP. > >> Can anyone please explain what these three are used for? I am able to > >> ping my machine from SSVM but not any further, i.e., not even my > >> network's proxy. > > > > > > If you can ping your local laptop, 192.168.56.1, inside SSVM, then that's > enough. > > Devcloud uses VirutalBox's host-only network, for the communication > between your laptop, devcloud debian VM and all the VMs created inside > devcloud VM. > > It means, all the VMs created inside devcloud VM, can only access > 192.168.56.x network. > > > >> I am not able to understand how I can set route table in the SSVM as, > >> when I capture packets on wireshark, I see the request coming from > >> eth1 while response goes to eth2, with Link Local IP associated with eth0. > >> I am really confused regarding this configuration. Can anyone help me > >> regarding this? > >> > >> Thanks. > >> > >> Kausal Malladi > >> www.kausalmalladi.tk
