Tilak, when you run the following command: python -m marvin.deployDataCenter -i /path/to/GSoC-2014/repo/advanced/advanced.json you replace "/path/to/GSoC-2014/repo" by a valid one right?
On Tue, Mar 24, 2015 at 3:27 AM, Tilak Raj Singh <tila...@gmail.com> wrote: > I couldnt deploy the zone pod cluster successfully hence there were no > hosts and I couldnt launch a VM. Later what I did was manually create zone > pod cluster and added the host and storage through the UI and it was > successfull. The system vms came up nicely. But it gave me connection timed > out when I tried to view the console of the CPVM or SSVM. > > On Tue, Mar 24, 2015 at 7:45 AM, Will Stevens <williamstev...@gmail.com> > wrote: > > > Can you launch a VM through the CS ui? > > On Mar 23, 2015 9:14 PM, "Tilak Raj Singh" <tila...@gmail.com> wrote: > > > > > Hi Will, > > > > > > yeah cloudstack management is running fine...I can open > > > 127.0.0.1:8080/client on my browser...And there are two vms > > > running..xenserver : I can ssh into it on port 2222 and management : i > > can > > > ssh into it on port 2200. I configured the networking in virtual box > > under > > > preferences/network/vboxnet0 192.168.56.1 and dhcp disabled...but there > > is > > > nothing under preferences/network/NAT in the virtualbox...do I have to > > > configure something there?? > > > > > > On Tue, Mar 24, 2015 at 6:32 AM, Will Stevens < > williamstev...@gmail.com> > > > wrote: > > > > > > > Is the cloudstack up and working? Did you check in virtual box if > the > > > > box(s?) are up? If so can you check the logs? > > > > > > > > It seems like you are not getting your networking configured because > > the > > > VM > > > > seems to come up but there is no connection. Is the network reported > > > > correct? Nat and host only is right? I think that is what I read. > > > > > > > > Ws > > > > On Mar 23, 2015 8:54 PM, "Tilak Raj Singh" <tila...@gmail.com> > wrote: > > > > > > > > > ---------- Forwarded message ---------- > > > > > From: Tilak Raj Singh <tila...@gmail.com> > > > > > Date: Tue, Mar 24, 2015 at 6:12 AM > > > > > Subject: Re: [GSOC] Setting up multiple devcloud host in cloudstack > > dev > > > > > environment > > > > > To: Pierre-Luc Dion <pd...@cloudops.com> > > > > > > > > > > > > > > > I just tried deploying on 4.3 branch using binary directory on 4.3 > > > branch > > > > > https://github.com/imduffy15/devcloud4/tree/master/basic and > > followed > > > > the > > > > > instructions given here > > > > > https://github.com/imduffy15/devcloud4/blob/master/basic/README.md > > > > > > > > > > still I am getting the same error... :/ > > > > > > > > > > Traceback (most recent call last): > > > > > File "/usr/lib/python2.7/runpy.py", line 162, in > > _run_module_as_main > > > > > "__main__", fname, loader, pkg_name) > > > > > File "/usr/lib/python2.7/runpy.py", line 72, in _run_code > > > > > exec code in run_globals > > > > > File > > > > "/usr/local/lib/python2.7/dist-packages/marvin/deployDataCenter.py", > > > > > line 572, in <module> > > > > > deploy.deploy() > > > > > File > > > > "/usr/local/lib/python2.7/dist-packages/marvin/deployDataCenter.py", > > > > > line 554, in deploy > > > > > self.loadCfg() > > > > > File > > > > "/usr/local/lib/python2.7/dist-packages/marvin/deployDataCenter.py", > > > > > line 516, in loadCfg > > > > > mgtDetails.apiKey, mgtDetails.securityKey = > self.registerApiKey() > > > > > File > > > > "/usr/local/lib/python2.7/dist-packages/marvin/deployDataCenter.py", > > > > > line 485, in registerApiKey > > > > > listuserRes = > self.testClient.getApiClient().listUsers(listuser) > > > > > File > > > > > > > > > > > > > > > > > > > > "/usr/local/lib/python2.7/dist-packages/marvin/cloudstackAPI/cloudstackAPIClient.py", > > > > > line 527, in listUsers > > > > > response = self.connection.marvinRequest(command, > > > > > response_type=response, method=method) > > > > > File > > > > > > > > > "/usr/local/lib/python2.7/dist-packages/marvin/cloudstackConnection.py", > > > > > line 272, in marvinRequest > > > > > response = jsonHelper.getResultObj(response.json(), > > response_type) > > > > > File "/usr/local/lib/python2.7/dist-packages/requests/models.py", > > > line > > > > > 802, in json > > > > > return json.loads(self.text, **kwargs) > > > > > File "/usr/lib/python2.7/dist-packages/simplejson/__init__.py", > > line > > > > 413, > > > > > in loads > > > > > return _default_decoder.decode(s) > > > > > File "/usr/lib/python2.7/dist-packages/simplejson/decoder.py", > line > > > > 402, > > > > > in decode > > > > > obj, end = self.raw_decode(s, idx=_w(s, 0).end()) > > > > > File "/usr/lib/python2.7/dist-packages/simplejson/decoder.py", > line > > > > 420, > > > > > in raw_decode > > > > > raise JSONDecodeError("No JSON object could be decoded", s, > idx) > > > > > simplejson.decoder.JSONDecodeError: No JSON object could be > decoded: > > > > line 1 > > > > > column 0 (char 0) > > > > > > > > > > > > > > > I cant figure out if the issue is in python or simplejson so I > > > > reinstalled > > > > > both but I am still stuck at the same stage > > > > > > > > > > On Tue, Mar 24, 2015 at 4:53 AM, Tilak Raj Singh < > tila...@gmail.com> > > > > > wrote: > > > > > > > > > > > Yeah I tried the binary-installation-basic one but ended up > getting > > > the > > > > > > errors I posted above. I followed up trying the not binary > advanced > > > as > > > > > you > > > > > > are provisioning. Doing vagrant up setup xenserver and management > > > > server > > > > > > successfully. > > > > > > > > > > > > I installed Marvin successfully doing 2015-03-24 04:41:49,970 - > > > DEBUG - > > > > > > Parsing Test data successfully using pip install > > > > > > tools/marvin/dist/Marvin-0.1.0.tar.gz. But when I try to deploy > the > > > > > > configuration using python -m marvin.deployDataCenter -i > > > > > > /path/to/GSoC-2014/repo/advanced/advanced.json I get the > following > > > > error > > > > > in > > > > > > the log files > > > > > > > > > > > > 2015-03-24 04:41:49,970 - DEBUG - Payload: {'account': 'admin', > > > > > 'command': > > > > > > 'listUsers', 'response': 'json'} > > > > > > 2015-03-24 04:41:49,970 - DEBUG - ========Sending GET Cmd : > > > > > > listUsers======= > > > > > > 2015-03-24 04:42:53,086 - ERROR - Exception:['Traceback (most > > recent > > > > call > > > > > > last):\n', ' File > > > > > > > > > > > > "/usr/local/lib/python2.7/dist-packages/marvin/cloudstackConnection.py", > > > > > > line 307, in __parseAndGetResponse\n cmd_response.json(),\n', > ' > > > > File > > > > > > "/usr/local/lib/python2.7/dist-packages/requests/models.py", line > > > 802, > > > > in > > > > > > json\n return json.loads(self.text, **kwargs)\n', ' File > > > > > > "/usr/lib/python2.7/dist-packages/simplejson/__init__.py", line > > 413, > > > in > > > > > > loads\n return _default_decoder.decode(s)\n', ' File > > > > > > "/usr/lib/python2.7/dist-packages/simplejson/decoder.py", line > 402, > > > in > > > > > > decode\n obj, end = self.raw_decode(s, idx=_w(s, > 0).end())\n', ' > > > > File > > > > > > "/usr/lib/python2.7/dist-packages/simplejson/decoder.py", line > 420, > > > in > > > > > > raw_decode\n raise JSONDecodeError("No JSON object could be > > > > decoded", > > > > > s, > > > > > > idx)\n', 'JSONDecodeError: No JSON object could be decoded: line > 1 > > > > > column 0 > > > > > > (char 0)\n'] > > > > > > Traceback (most recent call last): > > > > > > File > > > > > > > > > > > > "/usr/local/lib/python2.7/dist-packages/marvin/cloudstackConnection.py", > > > > > > line 307, in __parseAndGetResponse > > > > > > cmd_response.json(), > > > > > > File > "/usr/local/lib/python2.7/dist-packages/requests/models.py", > > > > line > > > > > > 802, in json > > > > > > return json.loads(self.text, **kwargs) > > > > > > File "/usr/lib/python2.7/dist-packages/simplejson/__init__.py", > > > line > > > > > > 413, in loads > > > > > > return _default_decoder.decode(s) > > > > > > File "/usr/lib/python2.7/dist-packages/simplejson/decoder.py", > > line > > > > > 402, > > > > > > in decode > > > > > > obj, end = self.raw_decode(s, idx=_w(s, 0).end()) > > > > > > File "/usr/lib/python2.7/dist-packages/simplejson/decoder.py", > > line > > > > > 420, > > > > > > in raw_decode > > > > > > raise JSONDecodeError("No JSON object could be decoded", s, > > idx) > > > > > > JSONDecodeError: No JSON object could be decoded: line 1 column 0 > > > (char > > > > > 0) > > > > > > 2015-03-24 04:42:53,086 - ERROR - marvinRequest : CmdName: > > > > > > <marvin.cloudstackAPI.listUsers.listUsersCmd object at 0x2050650> > > > > > > Exception: ['Traceback (most recent call last):\n', ' File > > > > > > > > > > > > "/usr/local/lib/python2.7/dist-packages/marvin/cloudstackConnection.py", > > > > > > line 374, in marvinRequest\n raise self.__lastError\n', > > > > > > 'JSONDecodeError: No JSON object could be decoded: line 1 column > 0 > > > > (char > > > > > > 0)\n'] > > > > > > Traceback (most recent call last): > > > > > > File > > > > > > > > > > > > "/usr/local/lib/python2.7/dist-packages/marvin/cloudstackConnection.py", > > > > > > line 374, in marvinRequest > > > > > > raise self.__lastError > > > > > > JSONDecodeError: No JSON object could be decoded: line 1 column 0 > > > (char > > > > > 0) > > > > > > 2015-03-24 04:42:53,088 - ERROR - Exception Occurred Under > > > > > > __createApiClient: ['Traceback (most recent call last):\n', ' > File > > > > > > > > > > > > "/usr/local/lib/python2.7/dist-packages/marvin/cloudstackTestClient.py", > > > > > > line 144, in __createApiClient\n list_user_res = > > > > > > self.__apiClient.listUsers(list_user)\n', ' File > > > > > > > > > > > > > > > > > > > > > "/usr/local/lib/python2.7/dist-packages/marvin/cloudstackAPI/cloudstackAPIClient.py", > > > > > > line 595, in listUsers\n response = > > > > > > self.connection.marvinRequest(command, response_type=response, > > > > > > method=method)\n', ' File > > > > > > > > > > > > "/usr/local/lib/python2.7/dist-packages/marvin/cloudstackConnection.py", > > > > > > line 379, in marvinRequest\n raise e\n', 'JSONDecodeError: No > > JSON > > > > > > object could be decoded: line 1 column 0 (char 0)\n'] > > > > > > Traceback (most recent call last): > > > > > > File > > > > > > > > > > > > "/usr/local/lib/python2.7/dist-packages/marvin/cloudstackTestClient.py", > > > > > > line 144, in __createApiClient > > > > > > list_user_res = self.__apiClient.listUsers(list_user) > > > > > > File > > > > > > > > > > > > > > > > > > > > > "/usr/local/lib/python2.7/dist-packages/marvin/cloudstackAPI/cloudstackAPIClient.py", > > > > > > line 595, in listUsers > > > > > > response = self.connection.marvinRequest(command, > > > > > > response_type=response, method=method) > > > > > > File > > > > > > > > > > > > "/usr/local/lib/python2.7/dist-packages/marvin/cloudstackConnection.py", > > > > > > line 379, in marvinRequest > > > > > > raise e > > > > > > JSONDecodeError: No JSON object could be decoded: line 1 column 0 > > > (char > > > > > 0) > > > > > > 2015-03-24 04:42:53,088 - ERROR - ==== Test Client Creation > Failed > > > ==== > > > > > > > > > > > > Can you help me with this? > > > > > > > > > > > > On Mon, Mar 23, 2015 at 6:05 PM, Pierre-Luc Dion < > > pd...@cloudops.com > > > > > > > > > > wrote: > > > > > > > > > > > >> Hi Tilak, > > > > > >> > > > > > >> This project is back from GSOC 2014, I'm not sure if Ian did > > > maintain > > > > it > > > > > >> recently so it might need some updates. Anyhow, I'm using the > not > > > > > binary > > > > > >> version (this section: > > > > > >> https://github.com/imduffy15/devcloud4/tree/master/advanced) > > which > > > > use > > > > > >> the management vm for the mysql + nfs and run > > cloudstack-management > > > > > locally > > > > > >> using jetty. > > > > > >> > > > > > >> This section should still work: > > > > > >> > > > > > > > > > > > > > > > https://github.com/imduffy15/devcloud4/tree/master/binary-installation-basic > > > > > >> , is it the version you tried? > > > > > >> > > > > > >> > > > > > >> > > > > > >> On Mon, Mar 23, 2015 at 4:32 AM, Tilak Raj Singh < > > tila...@gmail.com > > > > > > > > > >> wrote: > > > > > >> > > > > > >>> Thanks Dion for your insights. I tried the new git repository > you > > > > told > > > > > >>> about. I am still struggling to get the environment setup. I > > > > installed > > > > > >>> virtualbox, chef and vagrant and cloned the repository. > > configured > > > > > three > > > > > >>> host only networks with dhcp disabled > > > > > >>> vboxnet1 192.168.22.1 > > > > > >>> vboxnet2 192.168.23.1 > > > > > >>> vboxnet3 192.168.24.1 > > > > > >>> > > > > > >>> ran vagrant_prep.sh successfully. > > > > > >>> > > > > > >>> Now when I cd into binary_installation_binary directory and do > > > > "vagrant > > > > > >>> up" I get the following error > > > > > >>> > > > > > >>> ==> xenserver: Clearing any previously set network > interfaces... > > > > > >>> ==> xenserver: Preparing network interfaces based on > > > configuration... > > > > > >>> xenserver: Adapter 1: nat > > > > > >>> xenserver: Adapter 2: hostonly > > > > > >>> ==> xenserver: Forwarding ports... > > > > > >>> xenserver: 22 => 2222 (adapter 1) > > > > > >>> ==> xenserver: Running 'pre-boot' VM customizations... > > > > > >>> ==> xenserver: Booting VM... > > > > > >>> ==> xenserver: Waiting for machine to boot. This may take a few > > > > > >>> minutes... > > > > > >>> xenserver: SSH address: 127.0.0.1:2222 > > > > > >>> xenserver: SSH username: vagrant > > > > > >>> xenserver: SSH auth method: private key > > > > > >>> xenserver: Warning: Connection timeout. Retrying... > > > > > >>> Timed out while waiting for the machine to boot. This means > that > > > > > >>> Vagrant was unable to communicate with the guest machine within > > > > > >>> the configured ("config.vm.boot_timeout" value) time period. > > > > > >>> > > > > > >>> If you look above, you should be able to see the error(s) that > > > > > >>> Vagrant had when attempting to connect to the machine. These > > errors > > > > > >>> are usually good hints as to what may be wrong. > > > > > >>> > > > > > >>> If you're using a custom box, make sure that networking is > > properly > > > > > >>> working and you're able to connect to the machine. It is a > common > > > > > >>> problem that networking isn't setup properly in these boxes. > > > > > >>> Verify that authentication configurations are also setup > > properly, > > > > > >>> as well. > > > > > >>> > > > > > >>> If the box appears to be booting properly, you may want to > > increase > > > > > >>> the timeout ("config.vm.boot_timeout") value. > > > > > >>> > > > > > >>> The system is not able to ssh into the vm created. Can you help > > me > > > > > >>> figure this issue out > > > > > >>> > > > > > >>> Regards > > > > > >>> > > > > > >>> > > > > > >>> On Sun, Mar 22, 2015 at 7:07 PM, Pierre-Luc Dion < > > > pd...@cloudops.com > > > > > > > > > > >>> wrote: > > > > > >>> > > > > > >>>> Tilak, > > > > > >>>> > > > > > >>>> Take a look at devcloud4 from Ian Duffy[1], it use vagrant + > > > > > virtualbox > > > > > >>>> to setup a nice test env locally. You might be able to run > > > multiple > > > > > >>>> instance of the cloudstack management-server into VMs. > devcloud4 > > > > does > > > > > not > > > > > >>>> use the simulator as managed hypervisor, it deploy a XenServer > > VM, > > > > so > > > > > it > > > > > >>>> might help validating few tests where your 2 > management-servers > > > will > > > > > >>>> interact to same hosts. > > > > > >>>> > > > > > >>>> > > > > > >>>> [1] https://github.com/imduffy15/devcloud4 > > > > > >>>> > > > > > >>>> Good luck, > > > > > >>>> > > > > > >>>> > > > > > >>>> On Sun, Mar 22, 2015 at 7:18 AM, Daan Hoogland < > > > > > daan.hoogl...@gmail.com > > > > > >>>> > wrote: > > > > > >>>> > > > > > >>>>> Tilak, > > > > > >>>>> > > > > > >>>>> I am cross posting your question as it is more on topic in > the > > > dev > > > > > >>>>> list. Rohit's age is a good starting point. it is my > experience > > > > that > > > > > >>>>> every body will encounter their own problems in setting up a > > good > > > > > >>>>> environment and needs further support. In your case the dual > > host > > > > > >>>>> environment is a bit of a challange, though it has been set > up > > by > > > > > >>>>> several people. It could be convenient to set it up as remote > > > hosts > > > > > >>>>> instead of a devcloud vm. It should work though. > > > > > >>>>> > > > > > >>>>> Good travels and don't hasitate to ask for support, > > > > > >>>>> > > > > > >>>>> On Fri, Mar 20, 2015 at 9:15 PM, Tilak Raj Singh < > > > > tila...@gmail.com> > > > > > >>>>> wrote: > > > > > >>>>> > Hi can anyone please help me here?? > > > > > >>>>> > > > > > > >>>>> > On Fri, Mar 20, 2015 at 4:18 AM, Tilak Raj Singh < > > > > > tila...@gmail.com> > > > > > >>>>> wrote: > > > > > >>>>> > > > > > > >>>>> >> Hello All, > > > > > >>>>> >> > > > > > >>>>> >> I am trying to setup the cloudstack developement > environment > > > on > > > > my > > > > > >>>>> ubuntu > > > > > >>>>> >> 12.04 64bit machine. I have successfully setup the > > management > > > > > server > > > > > >>>>> >> locally on my machine using the docs [1]. As I am going to > > > start > > > > > >>>>> work on > > > > > >>>>> >> the issue CLOUDSTACK-8266 > > > > > >>>>> >> <https://issues.apache.org/jira/browse/CLOUDSTACK-8266> > > [2] I > > > > > need > > > > > >>>>> to > > > > > >>>>> >> setup atleast two host on my management server. I am > trying > > to > > > > > >>>>> setup two > > > > > >>>>> >> devcloud hosts for the same. Can anybody guide me how to > add > > > > them. > > > > > >>>>> Should I > > > > > >>>>> >> follow this guide [3] to setup first devcloud resources to > > my > > > > > >>>>> management > > > > > >>>>> >> server and then manually add the other devcloud host ip > into > > > the > > > > > >>>>> hosts > > > > > >>>>> >> section of cloudstack or should I edit devcloud.cfg file > to > > > add > > > > an > > > > > >>>>> entry > > > > > >>>>> >> for the ip, username and password for the second devcloud > > host > > > > and > > > > > >>>>> it would > > > > > >>>>> >> work? > > > > > >>>>> >> > > > > > >>>>> >> If I am wrong can please somebody help me figure out the > > > correct > > > > > >>>>> method to > > > > > >>>>> >> do the same. > > > > > >>>>> >> > > > > > >>>>> >> Regards > > > > > >>>>> >> > > > > > >>>>> >> [1] > > > > > >>>>> >> > > > > > >>>>> > > > > > > > > > > > > > > > https://cwiki.apache.org/confluence/display/CLOUDSTACK/Setting+up+CloudStack+Development+Environment+on+Linux > > > > > >>>>> >> > > > > > >>>>> >> [2] https://issues.apache.org/jira/browse/CLOUDSTACK-8266 > > > > > >>>>> >> > > > > > >>>>> >> [3] http://bhaisaab.org/logs/devcloud/ > > > > > >>>>> >> > > > > > >>>>> > > > > > >>>>> > > > > > >>>>> > > > > > >>>>> -- > > > > > >>>>> Daan > > > > > >>>>> > > > > > >>>> > > > > > >>>> > > > > > >>> > > > > > >> > > > > > > > > > > > > > > > > > > > > >
