Hi all, My vote: +1 (binding)
Based on below integration tests and manual verification. Boris Roman Schrijver Mission Critical Engineer +31 20 7506500 Boeingavenue 271 1119 PD Schiphol-Rijk <https://www.schubergphilis.com/> On 24/01/16 19:58, "Remi Bergsma" <rberg...@schubergphilis.com> wrote: >Hi all, > >My vote: +1 (binding) is based on the integration tests below. > >Regards, >Remi > > >``` >nosetests --with-marvin --marvin-config=${marvinCfg} -s -a >tags=advanced,required_hardware=true \ >component/test_vpc_redundant.py \ >component/test_routers_iptables_default_policy.py \ >component/test_routers_network_ops.py \ >component/test_vpc_router_nics.py \ >smoke/test_loadbalance.py \ >smoke/test_internal_lb.py \ >smoke/test_ssvm.py \ >smoke/test_network.py > >``` >Result: > >``` >Check the password file in the Router VM ... === TestName: >test_isolate_network_password_server | Status : SUCCESS === >ok >Create a redundant VPC with two networks with two VMs in each network ... === >TestName: test_01_create_redundant_VPC_2tiers_4VMs_4IPs_4PF_ACL | Status : >SUCCESS === >ok >Create a redundant VPC with two networks with two VMs in each network and >check default routes ... === TestName: test_02_redundant_VPC_default_routes | >Status : SUCCESS === >ok >Create a redundant VPC with two networks with two VMs in each network ... === >TestName: test_03_create_redundant_VPC_1tier_2VMs_2IPs_2PF_ACL_reboot_routers >| Status : SUCCESS === >ok >Create a redundant VPC with 1 Tier, 1 VM, 1 ACL, 1 PF and test Network GC Nics >... === TestName: test_04_rvpc_network_garbage_collector_nics | Status : >SUCCESS === >ok >Create a redundant VPC with 1 Tier, 1 VM, 1 ACL, 1 PF and test Network GC Nics >... === TestName: test_05_rvpc_multi_tiers | Status : SUCCESS === >ok >Test iptables default INPUT/FORWARD policy on RouterVM ... === TestName: >test_02_routervm_iptables_policies | Status : SUCCESS === >ok >Test iptables default INPUT/FORWARD policies on VPC router ... === TestName: >test_01_single_VPC_iptables_policies | Status : SUCCESS === >ok >Test redundant router internals ... === TestName: >test_01_isolate_network_FW_PF_default_routes_egress_true | Status : SUCCESS === >ok >Test redundant router internals ... === TestName: >test_02_isolate_network_FW_PF_default_routes_egress_false | Status : SUCCESS >=== >ok >Test redundant router internals ... === TestName: >test_01_RVR_Network_FW_PF_SSH_default_routes_egress_true | Status : SUCCESS === >ok >Test redundant router internals ... === TestName: >test_02_RVR_Network_FW_PF_SSH_default_routes_egress_false | Status : SUCCESS >=== >ok >Test redundant router internals ... === TestName: >test_03_RVR_Network_check_router_state | Status : SUCCESS === >ok >Create a VPC with two networks with one VM in each network and test nics after >destroy ... === TestName: test_01_VPC_nics_after_destroy | Status : SUCCESS === >ok >Create a VPC with two networks with one VM in each network and test default >routes ... === TestName: test_02_VPC_default_routes | Status : SUCCESS === >ok >Check that the /etc/dhcphosts.txt doesn't contain duplicate IPs ... === >TestName: test_router_dhcphosts | Status : SUCCESS === >ok >Test to create Load balancing rule with source NAT ... === TestName: >test_01_create_lb_rule_src_nat | Status : SUCCESS === >ok >Test to create Load balancing rule with non source NAT ... === TestName: >test_02_create_lb_rule_non_nat | Status : SUCCESS === >ok >Test for assign & removing load balancing rule ... === TestName: >test_assign_and_removal_lb | Status : SUCCESS === >ok >Test create, assign, remove of an Internal LB with roundrobin http traffic to >3 vm's in a Single VPC ... === TestName: >test_01_internallb_roundrobin_1VPC_3VM_HTTP_port80 | Status : SUCCESS === >ok >Test create, assign, remove of an Internal LB with roundrobin http traffic to >3 vm's in a Redundant VPC ... === TestName: >test_02_internallb_roundrobin_1RVPC_3VM_HTTP_port80 | Status : SUCCESS === >ok >Test to verify access to loadbalancer haproxy admin stats page ... === >TestName: test_03_vpc_internallb_haproxy_stats_on_all_interfaces | Status : >SUCCESS === >ok >Test to verify access to loadbalancer haproxy admin stats page ... === >TestName: test_04_rvpc_internallb_haproxy_stats_on_all_interfaces | Status : >SUCCESS === >ok >Test SSVM Internals ... === TestName: test_03_ssvm_internals | Status : >SUCCESS === >ok >Test CPVM Internals ... === TestName: test_04_cpvm_internals | Status : >SUCCESS === >ok >Test stop SSVM ... === TestName: test_05_stop_ssvm | Status : SUCCESS === >ok >Test stop CPVM ... === TestName: test_06_stop_cpvm | Status : SUCCESS === >ok >Test reboot SSVM ... === TestName: test_07_reboot_ssvm | Status : SUCCESS === >ok >Test reboot CPVM ... === TestName: test_08_reboot_cpvm | Status : SUCCESS === >ok >Test destroy SSVM ... === TestName: test_09_destroy_ssvm | Status : SUCCESS === >ok >Test destroy CPVM ... === TestName: test_10_destroy_cpvm | Status : SUCCESS === >ok >Test Site 2 Site VPN Across redundant VPCs ... === TestName: >test_01_redundant_vpc_site2site_vpn | Status : SUCCESS === >ok >Test Remote Access VPN in VPC ... === TestName: test_01_vpc_remote_access_vpn >| Status : SUCCESS === >ok >Test Site 2 Site VPN Across VPCs ... === TestName: test_01_vpc_site2site_vpn | >Status : SUCCESS === >ok >test_01_vpc_privategw_acl >(integration.smoke.test_privategw_acl.TestPrivateGwACL) ... === TestName: >test_01_vpc_privategw_acl | Status : SUCCESS === >ok >test_02_vpc_privategw_static_routes >(integration.smoke.test_privategw_acl.TestPrivateGwACL) ... === TestName: >test_02_vpc_privategw_static_routes | Status : SUCCESS === >ok >test_03_vpc_privategw_restart_vpc_cleanup >(integration.smoke.test_privategw_acl.TestPrivateGwACL) ... === TestName: >test_03_vpc_privategw_restart_vpc_cleanup | Status : SUCCESS === >ok >test_04_rvpc_privategw_static_routes >(integration.smoke.test_privategw_acl.TestPrivateGwACL) ... === TestName: >test_04_rvpc_privategw_static_routes | Status : SUCCESS === >ok >Test for port forwarding on source NAT ... === TestName: >test_01_port_fwd_on_src_nat | Status : SUCCESS === >ok >Test for port forwarding on non source NAT ... === TestName: >test_02_port_fwd_on_non_src_nat | Status : SUCCESS === >ok >Test for reboot router ... === TestName: test_reboot_router | Status : SUCCESS >=== >ok >Test for Router rules for network rules on acquired public IP ... === >TestName: test_network_rules_acquired_public_ip_1_static_nat_rule | Status : >SUCCESS === >ok >Test for Router rules for network rules on acquired public IP ... === >TestName: test_network_rules_acquired_public_ip_2_nat_rule | Status : SUCCESS >=== >ok >Test for Router rules for network rules on acquired public IP ... === >TestName: test_network_rules_acquired_public_ip_3_Load_Balancer_Rule | Status >: SUCCESS === >ok >---------------------------------------------------------------------- >Ran 44 tests in 22198.664s > >OK >``` > > >And: > >``` >nosetests --with-marvin --marvin-config=${marvinCfg} -s -a >tags=advanced,required_hardware=false \ >smoke/test_routers.py \ >smoke/test_network_acl.py \ >smoke/test_privategw_acl.py \ >smoke/test_reset_vm_on_reboot.py \ >smoke/test_vm_life_cycle.py \ >smoke/test_vpc_vpn.py \ >smoke/test_service_offerings.py \ >component/test_vpc_offerings.py \ >component/test_vpc_routers.py >``` > >Result: > >``` >Test router internal advanced zone ... === TestName: >test_02_router_internal_adv | Status : SUCCESS === >ok >Test restart network ... === TestName: test_03_restart_network_cleanup | >Status : SUCCESS === >ok >Test router basic setup ... === TestName: test_05_router_basic | Status : >SUCCESS === >ok >Test router advanced setup ... === TestName: test_06_router_advanced | Status >: SUCCESS === >ok >Test stop router ... === TestName: test_07_stop_router | Status : SUCCESS === >ok >Test start router ... === TestName: test_08_start_router | Status : SUCCESS === >ok >Test reboot router ... === TestName: test_09_reboot_router | Status : SUCCESS >=== >ok >Test reset virtual machine on reboot ... === TestName: >test_01_reset_vm_on_reboot | Status : SUCCESS === >ok >Test advanced zone virtual router ... === TestName: test_advZoneVirtualRouter >| Status : SUCCESS === >ok >Test Deploy Virtual Machine ... === TestName: test_deploy_vm | Status : >SUCCESS === >ok >Test Multiple Deploy Virtual Machine ... === TestName: test_deploy_vm_multiple >| Status : SUCCESS === >ok >Test Stop Virtual Machine ... === TestName: test_01_stop_vm | Status : SUCCESS >=== >ok >Test Start Virtual Machine ... === TestName: test_02_start_vm | Status : >SUCCESS === >ok >Test Reboot Virtual Machine ... === TestName: test_03_reboot_vm | Status : >SUCCESS === >ok >Test destroy Virtual Machine ... === TestName: test_06_destroy_vm | Status : >SUCCESS === >ok >Test recover Virtual Machine ... === TestName: test_07_restore_vm | Status : >SUCCESS === >ok >Test migrate VM ... === TestName: test_08_migrate_vm | Status : SUCCESS === >ok >Test destroy(expunge) Virtual Machine ... === TestName: test_09_expunge_vm | >Status : SUCCESS === >ok >Test to create service offering ... === TestName: >test_01_create_service_offering | Status : SUCCESS === >ok >Test to update existing service offering ... === TestName: >test_02_edit_service_offering | Status : SUCCESS === >ok >Test to delete service offering ... === TestName: >test_03_delete_service_offering | Status : SUCCESS === >ok >Test for delete account ... === TestName: test_delete_account | Status : >SUCCESS === >ok >Test for Associate/Disassociate public IP address for admin account ... === >TestName: test_public_ip_admin_account | Status : SUCCESS === >ok >Test for Associate/Disassociate public IP address for user account ... === >TestName: test_public_ip_user_account | Status : SUCCESS === >ok >Test for release public IP address ... === TestName: test_releaseIP | Status : >SUCCESS === >ok >Test create VPC offering ... === TestName: test_01_create_vpc_offering | >Status : SUCCESS === >ok >Test VPC offering without load balancing service ... === TestName: >test_03_vpc_off_without_lb | Status : SUCCESS === >ok >Test VPC offering without static NAT service ... === TestName: >test_04_vpc_off_without_static_nat | Status : SUCCESS === >ok >Test VPC offering without port forwarding service ... === TestName: >test_05_vpc_off_without_pf | Status : SUCCESS === >ok >Test VPC offering with invalid services ... === TestName: >test_06_vpc_off_invalid_services | Status : SUCCESS === >ok >Test update VPC offering ... === TestName: test_07_update_vpc_off | Status : >SUCCESS === >ok >Test list VPC offering ... === TestName: test_08_list_vpc_off | Status : >SUCCESS === >ok >test_09_create_redundant_vpc_offering >(integration.component.test_vpc_offerings.TestVPCOffering) ... === TestName: >test_09_create_redundant_vpc_offering | Status : SUCCESS === >ok >Test start/stop of router after addition of one guest network ... === >TestName: test_01_start_stop_router_after_addition_of_one_guest_network | >Status : SUCCESS === >ok >Test reboot of router after addition of one guest network ... === TestName: >test_02_reboot_router_after_addition_of_one_guest_network | Status : SUCCESS >=== >ok >Test to change service offering of router after addition of one guest network >... === TestName: >test_04_chg_srv_off_router_after_addition_of_one_guest_network | Status : >SUCCESS === >ok >Test destroy of router after addition of one guest network ... === TestName: >test_05_destroy_router_after_addition_of_one_guest_network | Status : SUCCESS >=== >ok >Test to stop and start router after creation of VPC ... === TestName: >test_01_stop_start_router_after_creating_vpc | Status : SUCCESS === >ok >Test to reboot the router after creating a VPC ... === TestName: >test_02_reboot_router_after_creating_vpc | Status : SUCCESS === >ok >Tests to change service offering of the Router after ... === TestName: >test_04_change_service_offerring_vpc | Status : SUCCESS === >ok >Test to destroy the router after creating a VPC ... === TestName: >test_05_destroy_router_after_creating_vpc | Status : SUCCESS === >ok > >---------------------------------------------------------------------- >Ran 41 tests in 7269.824s > >OK >``` > > >From: Remi Bergsma ><rberg...@schubergphilis.com<mailto:rberg...@schubergphilis.com>> >Date: Thursday 21 January 2016 00:01 >To: "dev@cloudstack.apache.org<mailto:dev@cloudstack.apache.org>" ><dev@cloudstack.apache.org<mailto:dev@cloudstack.apache.org>> >Subject: [VOTE] Apache CloudStack 4.8.0 > >Hi all, > >I've created a 4.8.0 release candidate, with the following artifacts up for a >vote: > >Git Branch and Commit SH: >https://git-wip-us.apache.org/repos/asf?p=cloudstack.git;a=shortlog;h=4.8.0-RC20160120T2343 > >Commit: 62f218b7bd0111105d201d1c8516180d8e6d6797 > >Source release (checksums and signatures are available at the same location): >https://dist.apache.org/repos/dist/dev/cloudstack/4.8.0/ > >PGP release keys (signed using A47DDC4F): >https://dist.apache.org/repos/dist/release/cloudstack/KEYS > >Vote will be open for at least 72 hours. > >For sanity in tallying the vote, can PMC members please be sure to indicate >"(binding)" with their vote? > >[ ] +1 approve >[ ] +0 no opinion >[ ] -1 disapprove (and reason why) > >
