Hi Wisam,
> -----Original Message-----
> From: dev [mailto:dev-boun...@dpdk.org] On Behalf Of Wisam Jaddo
> Sent: Wednesday, May 9, 2018 1:47 PM
> To: Wu, Jingjing <jingjing...@intel.com>; Lu, Wenzhuo
> <wenzhuo...@intel.com>; tho...@monjalon.net
> Cc: rasl...@mellanox.com; dev@dpdk.org; shah...@mellanox.com;
> wis...@mellanox.com
> Subject: [dpdk-dev] [PATCH v3 1/2] app/testpmd: add custom topology
> command
>
> Set custom topology for forwading packets by making the given two ports as
> pair, in custom topology the active ports will be the defiend in custum-topo
> only.
>
> This command will be useful in testing, when special topology is needed.
>
> usage:
> testpmd> set custom-topo (port_id_1) (port_id_2)
>
> Signed-off-by: Wisam Jaddo <wis...@mellanox.com>
> ---
> app/test-pmd/cmdline.c | 49
> +++++++++++++++++++++++++++++
> app/test-pmd/config.c | 41 ++++++++++++++++++++++++
> app/test-pmd/parameters.c | 6 ++--
> app/test-pmd/testpmd.h | 8 ++++-
> doc/guides/testpmd_app_ug/testpmd_funcs.rst | 8 +++++
> 5 files changed, 109 insertions(+), 3 deletions(-)
>
> diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c index
> 9615670..9d48048 100644
> --- a/app/test-pmd/cmdline.c
> +++ b/app/test-pmd/cmdline.c
> @@ -466,6 +466,9 @@ static void cmd_help_long_parsed(void
> *parsed_result,
> "set eth-peer (port_id) (peer_addr)\n"
> " set the peer address for certain port.\n\n"
>
> + "set custom-topo (port_id_1) (port_id_2)\n"
> + " set custom topo.\n\n"
> +
> "set port (port_id) uta (mac_address|all) (on|off)\n"
> " Add/Remove a or all unicast hash filter(s)"
> "from port X.\n\n"
> @@ -7649,6 +7652,51 @@ cmdline_parse_inst_t cmd_set_fwd_eth_peer = {
> },
> };
>
> +/* *** SET CUSTOM TOPO FOR CERTAIN PORT *** */ struct
> +cmd_custom_topo_result {
> + cmdline_fixed_string_t set;
> + cmdline_fixed_string_t custom_topo;
> + portid_t port_id_1;
> + portid_t port_id_2;
> +};
> +
> +static void cmd_set_custom_topo_parsed(void *parsed_result,
> + __attribute__((unused)) struct cmdline *cl,
> + __attribute__((unused)) void *data) {
> + struct cmd_custom_topo_result *res = parsed_result;
> +
> + if (test_done == 0) {
> + printf("Please stop forwarding first\n");
> + return;
> + }
> + if (!strcmp(res->custom_topo, "custom-topo")) {
> + set_custom_topo(res->port_id_1, res->port_id_2);
> + fwd_config_setup();
> + }
> +}
> +cmdline_parse_token_string_t cmd_set_custom_topo_set =
> + TOKEN_STRING_INITIALIZER(struct cmd_custom_topo_result, set,
> "set");
> +cmdline_parse_token_string_t cmd_set_custom_topo_custom_topo =
> + TOKEN_STRING_INITIALIZER(struct cmd_custom_topo_result,
> custom_topo,
> +"custom-topo"); cmdline_parse_token_num_t
> cmd_set_custom_topo_port_id_1 =
> + TOKEN_NUM_INITIALIZER(struct cmd_custom_topo_result,
> port_id_1,
> +UINT16); cmdline_parse_token_num_t cmd_set_custom_topo_port_id_2
> =
> + TOKEN_NUM_INITIALIZER(struct cmd_custom_topo_result,
> port_id_2,
> +UINT16);
> +
> +cmdline_parse_inst_t cmd_set_custom_topo = {
> + .f = cmd_set_custom_topo_parsed,
> + .data = NULL,
> + .help_str = "set custom-topo (port_id_1) (port_id_2)",
> + .tokens = {
> + (void *)&cmd_set_custom_topo_set,
> + (void *)&cmd_set_custom_topo_custom_topo,
> + (void *)&cmd_set_custom_topo_port_id_1,
> + (void *)&cmd_set_custom_topo_port_id_2,
> + NULL,
> + },
> +};
> +
> /* *** CONFIGURE QUEUE STATS COUNTER MAPPINGS *** */ struct
> cmd_set_qmap_result {
> cmdline_fixed_string_t set;
> @@ -16540,6 +16588,7 @@ cmdline_parse_ctx_t main_ctx[] = {
> (cmdline_parse_inst_t *)&cmd_stop,
> (cmdline_parse_inst_t *)&cmd_mac_addr,
> (cmdline_parse_inst_t *)&cmd_set_fwd_eth_peer,
> + (cmdline_parse_inst_t *)&cmd_set_custom_topo,
> (cmdline_parse_inst_t *)&cmd_set_qmap,
> (cmdline_parse_inst_t *)&cmd_set_xstats_hide_zero,
> (cmdline_parse_inst_t *)&cmd_operate_port, diff --git a/app/test-
> pmd/config.c b/app/test-pmd/config.c index 16fc481..23799ad 100644
> --- a/app/test-pmd/config.c
> +++ b/app/test-pmd/config.c
> @@ -2069,6 +2069,8 @@ fwd_topology_tx_port_get(portid_t rxp)
> return (rxp + 1) % cur_fwd_config.nb_fwd_ports;
> case PORT_TOPOLOGY_LOOP:
> return rxp;
> + case PORT_TOPOLOGY_CUSTOM:
> + return fwd_streams[rxp]->tx_port;
> }
> }
>
> @@ -2378,6 +2380,45 @@ set_fwd_eth_peer(portid_t port_id, char
> *peer_addr)
> new_peer_addr[c];
> }
>
> +static void
> +print_ports_range(void)
> +{
> + portid_t pid;
> + printf("Valid port range is [");
> + RTE_ETH_FOREACH_DEV(pid)
> + printf(", %d", pid);
> + printf("]\n");
> +}
> +
> +void
> +set_custom_topo(portid_t port_id_1, portid_t port_id_2) {
> + unsigned int portlist[RTE_MAX_ETHPORTS];
> + unsigned int i;
> + unsigned int nb_pt = 0;
> + if (port_topology != PORT_TOPOLOGY_CUSTOM) {
> + printf("Please set the forward topology to custom first.\n");
> + return;
> + }
> + if (port_id_is_invalid(port_id_1, ENABLED_WARN)) {
> + print_ports_range();
> + return;
> + }
> + if (port_id_is_invalid(port_id_2, ENABLED_WARN)) {
> + print_ports_range();
> + return;
> + }
> + fwd_streams[port_id_1]->tx_port = port_id_2;
> + fwd_streams[port_id_2]->tx_port = port_id_1;
> + fwd_ports[port_id_1] = port_id_1;
> + fwd_ports[port_id_2] = port_id_2;
> +
> + for (i = 0; i < RTE_MAX_ETHPORTS; i++)
> + if (fwd_ports[i] == i)
> + portlist[nb_pt++] = i;
> + set_fwd_ports_list(portlist, nb_pt);
> +}
> +
> int
> set_fwd_lcores_list(unsigned int *lcorelist, unsigned int nb_lc) { diff
> --git
> a/app/test-pmd/parameters.c b/app/test-pmd/parameters.c index
> aea8af8..0db411d 100644
> --- a/app/test-pmd/parameters.c
> +++ b/app/test-pmd/parameters.c
> @@ -139,8 +139,8 @@ usage(char* progname)
> printf(" --enable-hw-vlan-extend: enable hardware vlan
> extend.\n");
> printf(" --enable-drop-en: enable per queue packet drop.\n");
> printf(" --disable-rss: disable rss.\n");
> - printf(" --port-topology=N: set port topology (N: paired (default) or "
> - "chained).\n");
> + printf(" --port-topology=N: set port topology (N: paired (default)"
> + "(loop), (custom) or (chained).\n");
> printf(" --forward-mode=N: set forwarding mode (N: %s).\n",
> list_pkt_forwarding_modes());
> printf(" --rss-ip: set RSS functions to IPv4/IPv6 only .\n"); @@ -920,6
> +920,8 @@ launch_args_parse(int argc, char** argv)
> port_topology =
> PORT_TOPOLOGY_CHAINED;
> else if (!strcmp(optarg, "loop"))
> port_topology =
> PORT_TOPOLOGY_LOOP;
> + else if (!strcmp(optarg, "custom"))
> + port_topology =
> PORT_TOPOLOGY_CUSTOM;
> else
> rte_exit(EXIT_FAILURE, "port-
> topology %s invalid -"
> " must be: paired, chained or
> loop\n", diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h
> index 1af87b8..3250683 100644
> --- a/app/test-pmd/testpmd.h
> +++ b/app/test-pmd/testpmd.h
> @@ -67,6 +67,7 @@ enum {
> PORT_TOPOLOGY_PAIRED,
> PORT_TOPOLOGY_CHAINED,
> PORT_TOPOLOGY_LOOP,
> + PORT_TOPOLOGY_CUSTOM,
> };
>
> #ifdef RTE_TEST_PMD_RECORD_BURST_STATS
> @@ -363,6 +364,11 @@ extern uint8_t txring_numa[RTE_MAX_ETHPORTS];
> extern uint8_t socket_num;
>
> /*
> + * Store the custom topo.
> + */
> +portid_t fwd_ports[RTE_MAX_ETHPORTS];
> +
> +/*
> * Configuration of logical cores:
> * nb_fwd_lcores <= nb_cfg_lcores <= nb_lcores
> */
> @@ -598,7 +604,7 @@ void reconfig(portid_t new_port_id, unsigned
> socket_id); int init_fwd_streams(void);
>
> void set_fwd_eth_peer(portid_t port_id, char *peer_addr);
> -
> +void set_custom_topo(portid_t port_id_1, portid_t port_id_2);
> void port_mtu_set(portid_t port_id, uint16_t mtu); void
> port_reg_bit_display(portid_t port_id, uint32_t reg_off, uint8_t bit_pos);
> void port_reg_bit_set(portid_t port_id, uint32_t reg_off, uint8_t bit_pos,
> diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
> b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
> index 013a405..5edf210 100644
> --- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
> +++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
> @@ -1090,6 +1090,14 @@ Set the forwarding peer address for certain port::
>
> This is equivalent to the ``--eth-peer`` command-line option.
>
> +set custom-topo
> +~~~~~~~~~~~~~~
> +
> +Set custom topology for forwading packets by making the given two ports
> as pair.
> +In custom topology the active ports will be the defiend in custum-topo
> only::
> +
> + testpmd> set custom-topo (port_id_1) (port_id_2)
> +
> set port-uta
> ~~~~~~~~~~~~
>
> --
> 2.7.4
