Signed-off-by: Nelio Laranjeiro <nelio.laranje...@6wind.com>
---
drivers/net/mlx5/mlx5_flow.c | 102 ++++++++++++++++++++++++++++++++++-
drivers/net/mlx5/mlx5_rxtx.h | 2 +-
2 files changed, 101 insertions(+), 3 deletions(-)
diff --git a/drivers/net/mlx5/mlx5_flow.c b/drivers/net/mlx5/mlx5_flow.c
index 3412c856a..4ad581ed9 100644
--- a/drivers/net/mlx5/mlx5_flow.c
+++ b/drivers/net/mlx5/mlx5_flow.c
@@ -55,6 +55,7 @@ extern const struct eth_dev_ops mlx5_dev_ops_isolate;
#define MLX5_FLOW_LAYER_VXLAN (1u << 12)
#define MLX5_FLOW_LAYER_VXLAN_GPE (1u << 13)
#define MLX5_FLOW_LAYER_GRE (1u << 14)
+#define MLX5_FLOW_LAYER_MPLS (1u << 15)
/* Outer Masks. */
#define MLX5_FLOW_LAYER_OUTER_L3 \
@@ -68,7 +69,7 @@ extern const struct eth_dev_ops mlx5_dev_ops_isolate;
/* Tunnel Masks. */
#define MLX5_FLOW_LAYER_TUNNEL \
(MLX5_FLOW_LAYER_VXLAN | MLX5_FLOW_LAYER_VXLAN_GPE | \
- MLX5_FLOW_LAYER_GRE)
+ MLX5_FLOW_LAYER_GRE | MLX5_FLOW_LAYER_MPLS)
/* Inner Masks. */
#define MLX5_FLOW_LAYER_INNER_L3 \
@@ -92,6 +93,7 @@ extern const struct eth_dev_ops mlx5_dev_ops_isolate;
#define MLX5_IP_PROTOCOL_TCP 6
#define MLX5_IP_PROTOCOL_UDP 17
#define MLX5_IP_PROTOCOL_GRE 47
+#define MLX5_IP_PROTOCOL_MPLS 147
/* Priority reserved for default flows. */
#define MLX5_FLOW_PRIO_RSVD ((uint32_t)-1)
@@ -109,6 +111,7 @@ enum mlx5_expansion {
MLX5_EXPANSION_VXLAN,
MLX5_EXPANSION_VXLAN_GPE,
MLX5_EXPANSION_GRE,
+ MLX5_EXPANSION_MPLS,
MLX5_EXPANSION_ETH,
MLX5_EXPANSION_IPV4,
MLX5_EXPANSION_IPV4_UDP,
@@ -134,7 +137,8 @@ static const struct rte_flow_expand_node
mlx5_support_expansion[] = {
},
[MLX5_EXPANSION_OUTER_ETH] = {
.next = RTE_FLOW_EXPAND_RSS_NEXT(MLX5_EXPANSION_OUTER_IPV4,
- MLX5_EXPANSION_OUTER_IPV6),
+ MLX5_EXPANSION_OUTER_IPV6,
+ MLX5_EXPANSION_MPLS),
.type = RTE_FLOW_ITEM_TYPE_ETH,
.rss_types = 0,
},
@@ -189,6 +193,11 @@ static const struct rte_flow_expand_node
mlx5_support_expansion[] = {
.next = RTE_FLOW_EXPAND_RSS_NEXT(MLX5_EXPANSION_IPV4),
.type = RTE_FLOW_ITEM_TYPE_GRE,
},
+ [MLX5_EXPANSION_MPLS] = {
+ .next = RTE_FLOW_EXPAND_RSS_NEXT(MLX5_EXPANSION_IPV4,
+ MLX5_EXPANSION_IPV6),
+ .type = RTE_FLOW_ITEM_TYPE_MPLS,
+ },
[MLX5_EXPANSION_ETH] = {
.next = RTE_FLOW_EXPAND_RSS_NEXT(MLX5_EXPANSION_IPV4,
MLX5_EXPANSION_IPV6),
@@ -341,6 +350,14 @@ static struct mlx5_flow_tunnel_info tunnels_info[] = {
.tunnel = MLX5_FLOW_LAYER_GRE,
.ptype = RTE_PTYPE_TUNNEL_GRE,
},
+ {
+ .tunnel = MLX5_FLOW_LAYER_MPLS | MLX5_FLOW_LAYER_OUTER_L4_UDP,
+ .ptype = RTE_PTYPE_TUNNEL_MPLS_IN_GRE | RTE_PTYPE_L4_UDP,
+ },
+ {
+ .tunnel = MLX5_FLOW_LAYER_MPLS,
+ .ptype = RTE_PTYPE_TUNNEL_MPLS_IN_GRE,
+ },
};
/**
@@ -1591,6 +1608,84 @@ mlx5_flow_item_gre(const struct rte_flow_item *item,
return size;
}
+/**
+ * Convert the @p item into a Verbs specification after ensuring the NIC
+ * will understand and process it correctly.
+ * If the necessary size for the conversion is greater than the @p flow_size,
+ * nothing is written in @p flow, the validation is still performed.
+ *
+ * @param[in] item
+ * Item specification.
+ * @param[in, out] flow
+ * Pointer to flow structure.
+ * @param[in] flow_size
+ * Size in bytes of the available space in @p flow, if too small, nothing is
+ * written.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * On success the number of bytes consumed/necessary, if the returned value
+ * is lesser or equal to @p flow_size, the @p item has fully been converted,
+ * otherwise another call with this returned memory size should be done.
+ * On error, a negative errno value is returned and rte_errno is set.
+ */
+static int
+mlx5_flow_item_mpls(const struct rte_flow_item *item __rte_unused,
+ struct rte_flow *flow __rte_unused,
+ const size_t flow_size __rte_unused,
+ struct rte_flow_error *error)
+{
+#ifdef HAVE_IBV_DEVICE_MPLS_SUPPORT
+ const struct rte_flow_item_mpls *spec = item->spec;
+ const struct rte_flow_item_mpls *mask = item->mask;
+ unsigned int size = sizeof(struct ibv_flow_spec_mpls);
+ struct ibv_flow_spec_mpls mpls = {
+ .type = IBV_FLOW_SPEC_MPLS,
+ .size = size,
+ };
+ int ret;
+
+ if (flow->l3_protocol_en && flow->l3_protocol != MLX5_IP_PROTOCOL_MPLS)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM,
+ item,
+ "protocol filtering not compatible"
+ " with MPLS layer");
+ if (flow->layers & MLX5_FLOW_LAYER_TUNNEL)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM,
+ item,
+ "a tunnel is already"
+ " present");
+ if (!mask)
+ mask = &rte_flow_item_mpls_mask;
+ ret = mlx5_flow_item_acceptable
+ (item, (const uint8_t *)mask,
+ (const uint8_t *)&rte_flow_item_mpls_mask,
+ sizeof(struct rte_flow_item_mpls), error);
+ if (ret < 0)
+ return ret;
+ if (spec) {
+ memcpy(&mpls.val.label, spec, sizeof(mpls.val.label));
+ memcpy(&mpls.mask.label, mask, sizeof(mpls.mask.label));
+ /* Remove unwanted bits from values. */
+ mpls.val.label &= mpls.mask.label;
+ }
+ if (size <= flow_size) {
+ mlx5_flow_spec_verbs_add(flow, &mpls, size);
+ flow->cur_verbs->attr->priority = MLX5_PRIORITY_MAP_L2;
+ }
+ flow->layers |= MLX5_FLOW_LAYER_MPLS;
+ return size;
+#endif /* !HAVE_IBV_DEVICE_MPLS_SUPPORT */
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM,
+ item,
+ "MPLS is not supported by Verbs, please"
+ " update.");
+}
+
/**
* Convert the @p pattern into a Verbs specifications after ensuring the NIC
* will understand and process it correctly.
@@ -1660,6 +1755,9 @@ mlx5_flow_items(struct rte_eth_dev *dev,
case RTE_FLOW_ITEM_TYPE_GRE:
ret = mlx5_flow_item_gre(pattern, flow, remain, error);
break;
+ case RTE_FLOW_ITEM_TYPE_MPLS:
+ ret = mlx5_flow_item_mpls(pattern, flow, remain, error);
+ break;
default:
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ITEM,
diff --git a/drivers/net/mlx5/mlx5_rxtx.h b/drivers/net/mlx5/mlx5_rxtx.h
index 53992e8db..a04a84fec 100644
--- a/drivers/net/mlx5/mlx5_rxtx.h
+++ b/drivers/net/mlx5/mlx5_rxtx.h
@@ -35,7 +35,7 @@
#include "mlx5_prm.h"
/* Support tunnel matching. */
-#define MLX5_FLOW_TUNNEL 3
+#define MLX5_FLOW_TUNNEL 5
struct mlx5_rxq_stats {
unsigned int idx; /**< Mapping index. */
--
2.18.0
