On Fri, Aug 03, 2018 at 01:31:48PM -0700, Stephen Hemminger wrote:
> Fix spelling errors in messages and comments.
>
> Signed-off-by: Stephen Hemminger <step...@networkplumber.org>
> ---
Hi Stephen,
'initialise' is accepted, not a typo. AFAIK, it is 'British' way.
Same for 'recognised' and 'finalise'. I don't want to enforce people to use
'non-Britain' English for mlx5 PMD. :-)
Other than those, thanks for correcting typos.
Please send out v2.
Thanks,
Yongseok
> drivers/net/mlx5/mlx5_ethdev.c | 2 +-
> drivers/net/mlx5/mlx5_flow.c | 4 ++--
> drivers/net/mlx5/mlx5_mr.c | 8 ++++----
> drivers/net/mlx5/mlx5_rxq.c | 20 ++++++++++----------
> drivers/net/mlx5/mlx5_rxtx.c | 2 +-
> 5 files changed, 18 insertions(+), 18 deletions(-)
>
> diff --git a/drivers/net/mlx5/mlx5_ethdev.c b/drivers/net/mlx5/mlx5_ethdev.c
> index 34c5b95ee6d2..2c838e6539b6 100644
> --- a/drivers/net/mlx5/mlx5_ethdev.c
> +++ b/drivers/net/mlx5/mlx5_ethdev.c
> @@ -1138,7 +1138,7 @@ mlx5_dev_interrupt_handler_install(struct rte_eth_dev
> *dev)
> }
> ret = mlx5_socket_init(dev);
> if (ret)
> - DRV_LOG(ERR, "port %u cannot initialise socket: %s",
> + DRV_LOG(ERR, "port %u cannot initialize socket: %s",
> dev->data->port_id, strerror(rte_errno));
> else if (priv->primary_socket) {
> priv->intr_handle_socket.fd = priv->primary_socket;
> diff --git a/drivers/net/mlx5/mlx5_flow.c b/drivers/net/mlx5/mlx5_flow.c
> index b94c442ec4e6..d13178be6ba1 100644
> --- a/drivers/net/mlx5/mlx5_flow.c
> +++ b/drivers/net/mlx5/mlx5_flow.c
> @@ -1090,7 +1090,7 @@ mlx5_flow_item_ipv6(const struct rte_flow_item *item,
> struct rte_flow *flow,
> item,
> "L3 cannot follow an L4 layer.");
> /*
> - * IPv6 is not recognised by the NIC inside a GRE tunnel.
> + * IPv6 is not recognized by the NIC inside a GRE tunnel.
> * Such support has to be disabled as the rule will be
> * accepted. Issue reproduced with Mellanox OFED 4.3-3.0.2.1 and
> * Mellanox OFED 4.4-1.0.0.0.
> @@ -1100,7 +1100,7 @@ mlx5_flow_item_ipv6(const struct rte_flow_item *item,
> struct rte_flow *flow,
> RTE_FLOW_ERROR_TYPE_ITEM,
> item,
> "IPv6 inside a GRE tunnel is"
> - " not recognised.");
> + " not recognized.");
> if (!mask)
> mask = &rte_flow_item_ipv6_mask;
> ret = mlx5_flow_item_acceptable
> diff --git a/drivers/net/mlx5/mlx5_mr.c b/drivers/net/mlx5/mlx5_mr.c
> index 1d1bcb5fe028..aa7ca355b4d8 100644
> --- a/drivers/net/mlx5/mlx5_mr.c
> +++ b/drivers/net/mlx5/mlx5_mr.c
> @@ -446,7 +446,7 @@ mr_free(struct mlx5_mr *mr)
> }
>
> /**
> - * Releass resources of detached MR having no online entry.
> + * Release resources of detached MR having no online entry.
> *
> * @param dev
> * Pointer to Ethernet device.
> @@ -496,7 +496,7 @@ mr_find_contig_memsegs_cb(const struct rte_memseg_list
> *msl,
> }
>
> /**
> - * Create a new global Memroy Region (MR) for a missing virtual address.
> + * Create a new global Memory Region (MR) for a missing virtual address.
> * Register entire virtually contiguous memory chunk around the address.
> *
> * @param dev
> @@ -553,7 +553,7 @@ mlx5_mr_create(struct rte_eth_dev *dev, struct
> mlx5_mr_cache *entry,
> * Find out a contiguous virtual address chunk in use, to which the
> * given address belongs, in order to register maximum range. In the
> * best case where mempools are not dynamically recreated and
> - * '--socket-mem' is speicified as an EAL option, it is very likely to
> + * '--socket-mem' is specified as an EAL option, it is very likely to
> * have only one MR(LKey) per a socket and per a hugepage-size even
> * though the system memory is highly fragmented.
> */
> @@ -604,7 +604,7 @@ mlx5_mr_create(struct rte_eth_dev *dev, struct
> mlx5_mr_cache *entry,
> bmp_mem = RTE_PTR_ALIGN_CEIL(mr + 1, RTE_CACHE_LINE_SIZE);
> mr->ms_bmp = rte_bitmap_init(ms_n, bmp_mem, bmp_size);
> if (mr->ms_bmp == NULL) {
> - DEBUG("port %u unable to initialize bitamp for a new MR of"
> + DEBUG("port %u unable to initialize bitmap for a new MR of"
> " address (%p).",
> dev->data->port_id, (void *)addr);
> rte_errno = EINVAL;
> diff --git a/drivers/net/mlx5/mlx5_rxq.c b/drivers/net/mlx5/mlx5_rxq.c
> index 16e1641d00bc..7c2d65ff2007 100644
> --- a/drivers/net/mlx5/mlx5_rxq.c
> +++ b/drivers/net/mlx5/mlx5_rxq.c
> @@ -751,7 +751,7 @@ mlx5_rx_intr_disable(struct rte_eth_dev *dev, uint16_t
> rx_queue_id)
> * Queue index in DPDK Rx queue array
> *
> * @return
> - * The Verbs object initialised, NULL otherwise and rte_errno is set.
> + * The Verbs object initialized, NULL otherwise and rte_errno is set.
> */
> struct mlx5_rxq_ibv *
> mlx5_rxq_ibv_new(struct rte_eth_dev *dev, uint16_t idx)
> @@ -1179,7 +1179,7 @@ mlx5_mprq_free_mp(struct rte_eth_dev *dev)
>
> /**
> * Allocate a mempool for Multi-Packet RQ. All configured Rx queues share the
> - * mempool. If already allocated, reuse it if there're enough elements.
> + * mempool. If already allocated, reuse it if there are enough elements.
> * Otherwise, resize it.
> *
> * @param dev
> @@ -1234,7 +1234,7 @@ mlx5_mprq_alloc_mp(struct rte_eth_dev *dev)
> */
> desc *= 4;
> obj_num = desc + MLX5_MPRQ_MP_CACHE_SZ * priv->rxqs_n;
> - /* Check a mempool is already allocated and if it can be resued. */
> + /* Check a mempool is already allocated and if it can be reused. */
> if (mp != NULL && mp->elt_size >= obj_size && mp->size >= obj_num) {
> DRV_LOG(DEBUG, "port %u mempool %s is being reused",
> dev->data->port_id, mp->name);
> @@ -1583,7 +1583,7 @@ mlx5_rxq_verify(struct rte_eth_dev *dev)
> * Number of queues in the array.
> *
> * @return
> - * The Verbs object initialised, NULL otherwise and rte_errno is set.
> + * The Verbs object initialized, NULL otherwise and rte_errno is set.
> */
> struct mlx5_ind_table_ibv *
> mlx5_ind_table_ibv_new(struct rte_eth_dev *dev, const uint16_t *queues,
> @@ -1613,7 +1613,7 @@ mlx5_ind_table_ibv_new(struct rte_eth_dev *dev, const
> uint16_t *queues,
> ind_tbl->queues[i] = queues[i];
> }
> ind_tbl->queues_n = queues_n;
> - /* Finalise indirection table. */
> + /* Finalize indirection table. */
> for (j = 0; i != (unsigned int)(1 << wq_n); ++i, ++j)
> wq[i] = wq[j];
> ind_tbl->ind_table = mlx5_glue->create_rwq_ind_table
> @@ -1746,7 +1746,7 @@ mlx5_ind_table_ibv_verify(struct rte_eth_dev *dev)
> * Number of queues.
> *
> * @return
> - * The Verbs object initialised, NULL otherwise and rte_errno is set.
> + * The Verbs object initialized, NULL otherwise and rte_errno is set.
> */
> struct mlx5_hrxq *
> mlx5_hrxq_new(struct rte_eth_dev *dev,
> @@ -1950,7 +1950,7 @@ mlx5_hrxq_ibv_verify(struct rte_eth_dev *dev)
> * Pointer to Ethernet device.
> *
> * @return
> - * The Verbs object initialised, NULL otherwise and rte_errno is set.
> + * The Verbs object initialized, NULL otherwise and rte_errno is set.
> */
> struct mlx5_rxq_ibv *
> mlx5_rxq_ibv_drop_new(struct rte_eth_dev *dev)
> @@ -2009,7 +2009,7 @@ mlx5_rxq_ibv_drop_new(struct rte_eth_dev *dev)
> * Pointer to Ethernet device.
> *
> * @return
> - * The Verbs object initialised, NULL otherwise and rte_errno is set.
> + * The Verbs object initialized, NULL otherwise and rte_errno is set.
> */
> void
> mlx5_rxq_ibv_drop_release(struct rte_eth_dev *dev)
> @@ -2032,7 +2032,7 @@ mlx5_rxq_ibv_drop_release(struct rte_eth_dev *dev)
> * Pointer to Ethernet device.
> *
> * @return
> - * The Verbs object initialised, NULL otherwise and rte_errno is set.
> + * The Verbs object initialized, NULL otherwise and rte_errno is set.
> */
> struct mlx5_ind_table_ibv *
> mlx5_ind_table_ibv_drop_new(struct rte_eth_dev *dev)
> @@ -2096,7 +2096,7 @@ mlx5_ind_table_ibv_drop_release(struct rte_eth_dev *dev)
> * Pointer to Ethernet device.
> *
> * @return
> - * The Verbs object initialised, NULL otherwise and rte_errno is set.
> + * The Verbs object initialized, NULL otherwise and rte_errno is set.
> */
> struct mlx5_hrxq *
> mlx5_hrxq_drop_new(struct rte_eth_dev *dev)
> diff --git a/drivers/net/mlx5/mlx5_rxtx.c b/drivers/net/mlx5/mlx5_rxtx.c
> index 2d14f8a6edbd..95cbc513ca7b 100644
> --- a/drivers/net/mlx5/mlx5_rxtx.c
> +++ b/drivers/net/mlx5/mlx5_rxtx.c
> @@ -1507,7 +1507,7 @@ txq_burst_empw(struct mlx5_txq_data *txq, struct
> rte_mbuf **pkts,
> mpw.wqe->eseg.cs_flags = cs_flags;
> } else {
> /* Evaluate whether the next packet can be inlined.
> - * Inlininig is possible when:
> + * Inlining is possible when:
> * - length is less than configured value
> * - length fits for remaining space
> * - not required to fill the title WQEBB with dsegs
> --
> 2.18.0
>
