Fixed two verbatim text sections in vmxnet3 docs.
Signed-off-by: John McNamara <john.mcnamara at intel.com>
---
doc/guides/nics/vmxnet3.rst | 27 ++++++++++++++++++++-------
1 file changed, 20 insertions(+), 7 deletions(-)
diff --git a/doc/guides/nics/vmxnet3.rst b/doc/guides/nics/vmxnet3.rst
index 3aa5b40..830530d 100644
--- a/doc/guides/nics/vmxnet3.rst
+++ b/doc/guides/nics/vmxnet3.rst
@@ -149,10 +149,15 @@ This section describes an example setup for
Phy-vSwitch-VM-Phy communication.
Other instructions on preparing to use DPDK such as, hugepage enabling,
uio port binding are not listed here.
Please refer to *DPDK Getting Started Guide and DPDK Sample Application's
User Guide* for detailed instructions.
-The packet reception and transmission flow path is:
+The packet reception and transmission flow path is::
- Packet generator -> 82576 -> VMware ESXi vSwitch -> VMXNET3 device ->
Guest VM VMXNET3 port 0 rx burst -> Guest
- VM 82599 VF port 0 tx burst -> 82599 VF -> Packet generator
+ Packet generator -> 82576
+ -> VMware ESXi vSwitch
+ -> VMXNET3 device
+ -> Guest VM VMXNET3 port 0 rx burst
+ -> Guest VM 82599 VF port 0 tx burst
+ -> 82599 VF
+ -> Packet generator
VMXNET3 Chaining VMs Connected to a vSwitch
-------------------------------------------
@@ -166,7 +171,15 @@ The following figure shows an example VM-to-VM
communication over a Phy-VM-vSwit
When using the L2 Forwarding or L3 Forwarding applications,
a destination MAC address needs to be written in packets to hit the other
VM's VMXNET3 interface.
-In this example, the packet flow path is:
-
- Packet generator -> 82599 VF -> Guest VM 82599 port 0 rx burst -> Guest VM
VMXNET3 port 1 tx burst -> VMXNET3
- device -> VMware ESXi vSwitch -> VMXNET3 device -> Guest VM VMXNET3 port 0
rx burst -> Guest VM 82599 VF port 1 tx burst -> 82599 VF -> Packet generator
+In this example, the packet flow path is::
+
+ Packet generator -> 82599 VF
+ -> Guest VM 82599 port 0 rx burst
+ -> Guest VM VMXNET3 port 1 tx burst
+ -> VMXNET3 device
+ -> VMware ESXi vSwitch
+ -> VMXNET3 device
+ -> Guest VM VMXNET3 port 0 rx burst
+ -> Guest VM 82599 VF port 1 tx burst
+ -> 82599 VF
+ -> Packet generator
--
1.8.1.4
