v2 changes:
- add a new macro into rte_mbuf.h
- make samples to use that new macro
Fixes: dfb03bbe2b ("app/testpmd: use standard functions to initialize
mbufs and mbuf pool").
Latest mbuf changes (priv_size addition and related fixes)
exposed small problem with testpmd and few other sample apps:
when mbuf size is exaclty 2KB or less, that causes
ixgbe PMD to select scattered RX even for configs with 'normal'
max packet length (max_rx_pkt_len == ETHER_MAX_LEN).
To overcome that problem and unify the code, new macro was created
to represent recommended minimal buffer length for mbuf.
When appropriate, samples are updated to use that macro.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev at intel.com>
---
app/test-pmd/testpmd.h | 3 ++-
app/test/test_distributor.c | 4 +---
app/test/test_distributor_perf.c | 4 +---
app/test/test_link_bonding.c | 6 ++----
app/test/test_link_bonding_mode4.c | 6 ++----
app/test/test_pmd_perf.c | 5 ++---
app/test/test_pmd_ring.c | 3 +--
app/test/test_reorder.c | 4 ++--
app/test/test_table.h | 2 +-
examples/bond/main.c | 3 +--
examples/distributor/main.c | 5 ++---
examples/dpdk_qat/main.c | 3 +--
examples/ip_fragmentation/main.c | 4 +---
examples/ip_pipeline/init.c | 2 +-
examples/ip_reassembly/main.c | 2 +-
examples/ipv4_multicast/main.c | 2 +-
examples/l2fwd-ivshmem/host/host.c | 3 +--
examples/l2fwd-jobstats/main.c | 3 +--
examples/l2fwd/main.c | 3 +--
examples/l3fwd-acl/main.c | 5 ++---
examples/l3fwd-power/main.c | 5 ++---
examples/l3fwd-vf/main.c | 6 ++----
examples/l3fwd/main.c | 6 ++----
examples/link_status_interrupt/main.c | 3 +--
examples/load_balancer/main.h | 2 +-
examples/multi_process/client_server_mp/mp_server/init.c | 3 +--
examples/multi_process/l2fwd_fork/main.c | 3 ++-
examples/multi_process/symmetric_mp/main.c | 3 +--
examples/netmap_compat/bridge/bridge.c | 2 +-
examples/packet_ordering/main.c | 3 +--
examples/qos_meter/main.c | 3 +--
examples/qos_sched/init.c | 3 ++-
examples/qos_sched/main.h | 1 -
examples/quota_watermark/include/conf.h | 2 +-
examples/rxtx_callbacks/main.c | 5 ++---
examples/skeleton/basicfwd.c | 3 +--
examples/vhost/main.c | 8 ++++----
examples/vhost_xen/main.c | 3 +--
examples/vmdq/main.c | 3 +--
examples/vmdq_dcb/main.c | 3 +--
lib/librte_mbuf/rte_mbuf.h | 10 ++++++++++
41 files changed, 65 insertions(+), 87 deletions(-)
diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h
index 389fc24..c3b6700 100644
--- a/app/test-pmd/testpmd.h
+++ b/app/test-pmd/testpmd.h
@@ -48,7 +48,8 @@
* Default size of the mbuf data buffer to receive standard 1518-byte
* Ethernet frames in a mono-segment memory buffer.
*/
-#define DEFAULT_MBUF_DATA_SIZE 2048 /**< Default size of mbuf data buffer. */
+#define DEFAULT_MBUF_DATA_SIZE RTE_MBUF_DEFAULT_BUF_SIZE
+/**< Default size of mbuf data buffer. */
/*
* The maximum number of segments per packet is used when creating
diff --git a/app/test/test_distributor.c b/app/test/test_distributor.c
index ad46987..b334392 100644
--- a/app/test/test_distributor.c
+++ b/app/test/test_distributor.c
@@ -500,8 +500,6 @@ quit_workers(struct rte_distributor *d, struct rte_mempool
*p)
worker_idx = 0;
}
-#define MBUF_DATA_SIZE (2048 + RTE_PKTMBUF_HEADROOM)
-
static int
test_distributor(void)
{
@@ -529,7 +527,7 @@ test_distributor(void)
(BIG_BATCH * 2) - 1 : (511 * rte_lcore_count());
if (p == NULL) {
p = rte_pktmbuf_pool_create("DT_MBUF_POOL", nb_bufs, BURST,
- 0, MBUF_DATA_SIZE, rte_socket_id());
+ 0, RTE_MBUF_DEFAULT_BUF_SIZE, rte_socket_id());
if (p == NULL) {
printf("Error creating mempool\n");
return -1;
diff --git a/app/test/test_distributor_perf.c b/app/test/test_distributor_perf.c
index f04cb15..c45a012 100644
--- a/app/test/test_distributor_perf.c
+++ b/app/test/test_distributor_perf.c
@@ -209,8 +209,6 @@ quit_workers(struct rte_distributor *d, struct rte_mempool
*p)
worker_idx = 0;
}
-#define MBUF_DATA_SIZE (2048 + RTE_PKTMBUF_HEADROOM)
-
static int
test_distributor_perf(void)
{
@@ -241,7 +239,7 @@ test_distributor_perf(void)
(BIG_BATCH * 2) - 1 : (511 * rte_lcore_count());
if (p == NULL) {
p = rte_pktmbuf_pool_create("DPT_MBUF_POOL", nb_bufs, BURST,
- 0, MBUF_DATA_SIZE, rte_socket_id());
+ 0, RTE_MBUF_DEFAULT_BUF_SIZE, rte_socket_id());
if (p == NULL) {
printf("Error creating mempool\n");
return -1;
diff --git a/app/test/test_link_bonding.c b/app/test/test_link_bonding.c
index 674d8dd..305d45d 100644
--- a/app/test/test_link_bonding.c
+++ b/app/test/test_link_bonding.c
@@ -75,11 +75,9 @@
ETH_TXQ_FLAGS_NOXSUMSCTP | ETH_TXQ_FLAGS_NOXSUMUDP | \
ETH_TXQ_FLAGS_NOXSUMTCP)
-#define MBUF_DATA_SIZE (2048 + RTE_PKTMBUF_HEADROOM)
#define MBUF_CACHE_SIZE (250)
#define BURST_SIZE (32)
-#define DEFAULT_MBUF_DATA_SIZE (2048)
#define RTE_TEST_RX_DESC_MAX (2048)
#define RTE_TEST_TX_DESC_MAX (2048)
#define MAX_PKT_BURST (512)
@@ -280,8 +278,8 @@ test_setup(void)
RTE_TEST_TX_DESC_MAX + MAX_PKT_BURST;
if (test_params->mbuf_pool == NULL) {
test_params->mbuf_pool = rte_pktmbuf_pool_create("MBUF_POOL",
- nb_mbuf_per_pool, MBUF_CACHE_SIZE, 0, MBUF_DATA_SIZE,
- rte_socket_id());
+ nb_mbuf_per_pool, MBUF_CACHE_SIZE, 0,
+ RTE_MBUF_DEFAULT_BUF_SIZE, rte_socket_id());
TEST_ASSERT_NOT_NULL(test_params->mbuf_pool,
"rte_mempool_create failed");
}
diff --git a/app/test/test_link_bonding_mode4.c
b/app/test/test_link_bonding_mode4.c
index 590daad..460539d 100644
--- a/app/test/test_link_bonding_mode4.c
+++ b/app/test/test_link_bonding_mode4.c
@@ -65,11 +65,9 @@
#define RX_RING_SIZE 128
#define TX_RING_SIZE 512
-#define MBUF_DATA_SIZE (2048 + RTE_PKTMBUF_HEADROOM)
#define MBUF_CACHE_SIZE (250)
#define BURST_SIZE (32)
-#define DEFAULT_MBUF_DATA_SIZE (2048)
#define TEST_RX_DESC_MAX (2048)
#define TEST_TX_DESC_MAX (2048)
#define MAX_PKT_BURST (32)
@@ -389,8 +387,8 @@ test_setup(void)
nb_mbuf_per_pool = TEST_RX_DESC_MAX + DEF_PKT_BURST +
TEST_TX_DESC_MAX + MAX_PKT_BURST;
test_params.mbuf_pool = rte_pktmbuf_pool_create("TEST_MODE4",
- nb_mbuf_per_pool, MBUF_CACHE_SIZE, 0, MBUF_DATA_SIZE,
- socket_id);
+ nb_mbuf_per_pool, MBUF_CACHE_SIZE, 0,
+ RTE_MBUF_DEFAULT_BUF_SIZE, socket_id);
TEST_ASSERT(test_params.mbuf_pool != NULL,
"rte_mempool_create failed\n");
diff --git a/app/test/test_pmd_perf.c b/app/test/test_pmd_perf.c
index 49a494d..1fd6843 100644
--- a/app/test/test_pmd_perf.c
+++ b/app/test/test_pmd_perf.c
@@ -47,7 +47,6 @@
#define NB_ETHPORTS_USED (1)
#define NB_SOCKETS (2)
#define MEMPOOL_CACHE_SIZE 250
-#define MBUF_DATA_SIZE (2048 + RTE_PKTMBUF_HEADROOM)
#define MAX_PKT_BURST (32)
#define RTE_TEST_RX_DESC_DEFAULT (128)
#define RTE_TEST_TX_DESC_DEFAULT (512)
@@ -290,8 +289,8 @@ init_mbufpool(unsigned nb_mbuf)
snprintf(s, sizeof(s), "mbuf_pool_%d", socketid);
mbufpool[socketid] =
rte_pktmbuf_pool_create(s, nb_mbuf,
- MEMPOOL_CACHE_SIZE, 0, MBUF_DATA_SIZE,
- socketid);
+ MEMPOOL_CACHE_SIZE, 0,
+ RTE_MBUF_DEFAULT_BUF_SIZE, socketid);
if (mbufpool[socketid] == NULL)
rte_exit(EXIT_FAILURE,
"Cannot init mbuf pool on socket %d\n",
diff --git a/app/test/test_pmd_ring.c b/app/test/test_pmd_ring.c
index 53897f7..a555db8 100644
--- a/app/test/test_pmd_ring.c
+++ b/app/test/test_pmd_ring.c
@@ -48,7 +48,6 @@ static struct rte_mempool *mp;
#define RING_SIZE 256
-#define MBUF_DATA_SIZE (2048 + RTE_PKTMBUF_HEADROOM)
#define NB_MBUF 512
static int
@@ -407,7 +406,7 @@ static int
test_pmd_ring(void)
{
mp = rte_pktmbuf_pool_create("mbuf_pool", NB_MBUF, 32,
- 0, MBUF_DATA_SIZE, rte_socket_id());
+ 0, RTE_MBUF_DEFAULT_BUF_SIZE, rte_socket_id());
if (mp == NULL)
return -1;
diff --git a/app/test/test_reorder.c b/app/test/test_reorder.c
index 91fbe9a..5752d7e 100644
--- a/app/test/test_reorder.c
+++ b/app/test/test_reorder.c
@@ -50,7 +50,6 @@
#define REORDER_BUFFER_SIZE 16384
#define NUM_MBUFS (2*REORDER_BUFFER_SIZE)
#define REORDER_BUFFER_SIZE_INVALID 2049
-#define MBUF_DATA_SIZE (2048 + RTE_PKTMBUF_HEADROOM)
struct reorder_unittest_params {
struct rte_mempool *p;
@@ -352,7 +351,8 @@ test_setup(void)
/* mempool creation */
if (test_params->p == NULL) {
test_params->p = rte_pktmbuf_pool_create("RO_MBUF_POOL",
- NUM_MBUFS, BURST, 0, MBUF_DATA_SIZE, rte_socket_id());
+ NUM_MBUFS, BURST, 0, RTE_MBUF_DEFAULT_BUF_SIZE,
+ rte_socket_id());
if (test_params->p == NULL) {
printf("%s: Error creating mempool\n", __func__);
return -1;
diff --git a/app/test/test_table.h b/app/test/test_table.h
index be331c0..accc6f8 100644
--- a/app/test/test_table.h
+++ b/app/test/test_table.h
@@ -65,7 +65,7 @@
#define PORT_TX_RING_SIZE 512
#define RING_RX_SIZE 128
#define RING_TX_SIZE 128
-#define POOL_BUFFER_SIZE (2048 + RTE_PKTMBUF_HEADROOM)
+#define POOL_BUFFER_SIZE RTE_MBUF_DEFAULT_BUF_SIZE
#define POOL_SIZE (32 * 1024)
#define POOL_CACHE_SIZE 256
#define BURST_SIZE 8
diff --git a/examples/bond/main.c b/examples/bond/main.c
index fcb4c4e..e90dc1d 100644
--- a/examples/bond/main.c
+++ b/examples/bond/main.c
@@ -96,7 +96,6 @@
#define RTE_LOGTYPE_DCB RTE_LOGTYPE_USER1
-#define MBUF_DATA_SIZE (2048 + RTE_PKTMBUF_HEADROOM)
#define NB_MBUF (1024*8)
#define MAX_PKT_BURST 32
@@ -739,7 +738,7 @@ main(int argc, char *argv[])
rte_exit(EXIT_FAILURE, "You can have max 4 ports\n");
mbuf_pool = rte_pktmbuf_pool_create("MBUF_POOL", NB_MBUF, 32,
- 0, MBUF_DATA_SIZE, rte_socket_id());
+ 0, RTE_MBUF_DEFAULT_BUF_SIZE, rte_socket_id());
if (mbuf_pool == NULL)
rte_exit(EXIT_FAILURE, "Cannot create mbuf pool\n");
diff --git a/examples/distributor/main.c b/examples/distributor/main.c
index 78fe3e9..ae3e7b3 100644
--- a/examples/distributor/main.c
+++ b/examples/distributor/main.c
@@ -47,7 +47,6 @@
#define RX_RING_SIZE 256
#define TX_RING_SIZE 512
#define NUM_MBUFS ((64*1024)-1)
-#define MBUF_DATA_SIZE (2048 + RTE_PKTMBUF_HEADROOM)
#define MBUF_CACHE_SIZE 250
#define BURST_SIZE 32
#define RTE_RING_SZ 1024
@@ -529,8 +528,8 @@ main(int argc, char *argv[])
"when using a single port\n");
mbuf_pool = rte_pktmbuf_pool_create("MBUF_POOL",
- NUM_MBUFS * nb_ports, MBUF_CACHE_SIZE, 0, MBUF_DATA_SIZE,
- rte_socket_id());
+ NUM_MBUFS * nb_ports, MBUF_CACHE_SIZE, 0,
+ RTE_MBUF_DEFAULT_BUF_SIZE, rte_socket_id());
if (mbuf_pool == NULL)
rte_exit(EXIT_FAILURE, "Cannot create mbuf pool\n");
nb_ports_available = nb_ports;
diff --git a/examples/dpdk_qat/main.c b/examples/dpdk_qat/main.c
index 053be91..c66a8cc 100644
--- a/examples/dpdk_qat/main.c
+++ b/examples/dpdk_qat/main.c
@@ -70,7 +70,6 @@
#include "crypto.h"
-#define MBUF_DATA_SIZE (2048 + RTE_PKTMBUF_HEADROOM)
#define NB_MBUF (32 * 1024)
#define MAX_PKT_BURST 32
@@ -613,7 +612,7 @@ init_mem(void)
snprintf(s, sizeof(s), "mbuf_pool_%d", socketid);
pktmbuf_pool[socketid] =
rte_pktmbuf_pool_create(s, NB_MBUF, 32, 0,
- MBUF_DATA_SIZE, socketid);
+ RTE_MBUF_DEFAULT_BUF_SIZE, socketid);
if (pktmbuf_pool[socketid] == NULL) {
printf("Cannot init mbuf pool on socket %d\n",
socketid);
return -1;
diff --git a/examples/ip_fragmentation/main.c b/examples/ip_fragmentation/main.c
index c702fdd..0922ba6 100644
--- a/examples/ip_fragmentation/main.c
+++ b/examples/ip_fragmentation/main.c
@@ -76,8 +76,6 @@
#define RTE_LOGTYPE_IP_FRAG RTE_LOGTYPE_USER1
-#define MBUF_SIZE (2048 + RTE_PKTMBUF_HEADROOM)
-
/* allow max jumbo frame 9.5 KB */
#define JUMBO_FRAME_MAX_SIZE 0x2600
@@ -745,7 +743,7 @@ init_mem(void)
snprintf(buf, sizeof(buf), "pool_direct_%i", socket);
mp = rte_pktmbuf_pool_create(buf, NB_MBUF, 32,
- 0, MBUF_DATA_SIZE, socket);
+ 0, RTE_MBUF_DEFAULT_BUF_SIZE, socket);
if (mp == NULL) {
RTE_LOG(ERR, IP_FRAG, "Cannot create direct
mempool\n");
return -1;
diff --git a/examples/ip_pipeline/init.c b/examples/ip_pipeline/init.c
index 275fb35..d79762f 100644
--- a/examples/ip_pipeline/init.c
+++ b/examples/ip_pipeline/init.c
@@ -146,7 +146,7 @@ struct app_params app = {
.bsz_swq_wr = 64,
/* Buffer pool */
- .pool_buffer_size = 2048 + RTE_PKTMBUF_HEADROOM,
+ .pool_buffer_size = RTE_MBUF_DEFAULT_BUF_SIZE,
.pool_size = 32 * 1024,
.pool_cache_size = 256,
diff --git a/examples/ip_reassembly/main.c b/examples/ip_reassembly/main.c
index 75ecfed..9ecb6f9 100644
--- a/examples/ip_reassembly/main.c
+++ b/examples/ip_reassembly/main.c
@@ -85,7 +85,7 @@
#define MAX_JUMBO_PKT_LEN 9600
-#define BUF_SIZE 2048
+#define BUF_SIZE RTE_MBUF_DEFAULT_DATAROOM
#define MBUF_SIZE \
(BUF_SIZE + sizeof(struct rte_mbuf) + RTE_PKTMBUF_HEADROOM)
diff --git a/examples/ipv4_multicast/main.c b/examples/ipv4_multicast/main.c
index 575e989..2a2b915 100644
--- a/examples/ipv4_multicast/main.c
+++ b/examples/ipv4_multicast/main.c
@@ -77,7 +77,7 @@
#define MCAST_CLONE_PORTS 2
#define MCAST_CLONE_SEGS 2
-#define PKT_MBUF_DATA_SIZE (2048 + RTE_PKTMBUF_HEADROOM)
+#define PKT_MBUF_DATA_SIZE RTE_MBUF_DEFAULT_BUF_SIZE
#define NB_PKT_MBUF 8192
#define HDR_MBUF_DATA_SIZE (2 * RTE_PKTMBUF_HEADROOM)
diff --git a/examples/l2fwd-ivshmem/host/host.c
b/examples/l2fwd-ivshmem/host/host.c
index 197f22b..d923711 100644
--- a/examples/l2fwd-ivshmem/host/host.c
+++ b/examples/l2fwd-ivshmem/host/host.c
@@ -71,7 +71,6 @@ static uint32_t l2fwd_ivshmem_enabled_port_mask = 0;
static struct ether_addr l2fwd_ivshmem_ports_eth_addr[RTE_MAX_ETHPORTS];
#define NB_MBUF 8192
-#define MBUF_DATA_SIZE (2048 + RTE_PKTMBUF_HEADROOM)
#define MAX_RX_QUEUE_PER_LCORE 16
#define MAX_TX_QUEUE_PER_PORT 16
@@ -671,7 +670,7 @@ int main(int argc, char **argv)
/* create a shared mbuf pool */
l2fwd_ivshmem_pktmbuf_pool =
rte_pktmbuf_pool_create(MBUF_MP_NAME, NB_MBUF, 32,
- 0, MBUF_DATA_SIZE, rte_socket_id());
+ 0, RTE_MBUF_DEFAULT_BUF_SIZE, rte_socket_id());
if (l2fwd_ivshmem_pktmbuf_pool == NULL)
rte_exit(EXIT_FAILURE, "Cannot init mbuf pool\n");
diff --git a/examples/l2fwd-jobstats/main.c b/examples/l2fwd-jobstats/main.c
index fcebbda..7b59f4e 100644
--- a/examples/l2fwd-jobstats/main.c
+++ b/examples/l2fwd-jobstats/main.c
@@ -70,7 +70,6 @@
#define RTE_LOGTYPE_L2FWD RTE_LOGTYPE_USER1
-#define MBUF_DATA_SIZE (2048 + RTE_PKTMBUF_HEADROOM)
#define NB_MBUF 8192
#define MAX_PKT_BURST 32
@@ -834,7 +833,7 @@ main(int argc, char **argv)
/* create the mbuf pool */
l2fwd_pktmbuf_pool =
rte_pktmbuf_pool_create("mbuf_pool", NB_MBUF, 32,
- 0, MBUF_DATA_SIZE, rte_socket_id());
+ 0, RTE_MBUF_DEFAULT_BUF_SIZE, rte_socket_id());
if (l2fwd_pktmbuf_pool == NULL)
rte_exit(EXIT_FAILURE, "Cannot init mbuf pool\n");
diff --git a/examples/l2fwd/main.c b/examples/l2fwd/main.c
index d0a1ec8..6ed7690 100644
--- a/examples/l2fwd/main.c
+++ b/examples/l2fwd/main.c
@@ -71,7 +71,6 @@
#define RTE_LOGTYPE_L2FWD RTE_LOGTYPE_USER1
-#define MBUF_DATA_SIZE (2048 + RTE_PKTMBUF_HEADROOM)
#define NB_MBUF 8192
#define MAX_PKT_BURST 32
@@ -561,7 +560,7 @@ main(int argc, char **argv)
/* create the mbuf pool */
l2fwd_pktmbuf_pool = rte_pktmbuf_pool_create("mbuf_pool", NB_MBUF, 32,
- 0, MBUF_DATA_SIZE, rte_socket_id());
+ 0, RTE_MBUF_DEFAULT_BUF_SIZE, rte_socket_id());
if (l2fwd_pktmbuf_pool == NULL)
rte_exit(EXIT_FAILURE, "Cannot init mbuf pool\n");
diff --git a/examples/l3fwd-acl/main.c b/examples/l3fwd-acl/main.c
index 1a04004..a5d4f25 100644
--- a/examples/l3fwd-acl/main.c
+++ b/examples/l3fwd-acl/main.c
@@ -80,8 +80,6 @@
#define MEMPOOL_CACHE_SIZE 256
-#define MBUF_DATA_SIZE (2048 + RTE_PKTMBUF_HEADROOM)
-
/*
* This expression is used to calculate the number of mbufs needed
* depending on user input, taking into account memory for rx and tx hardware
@@ -1849,7 +1847,8 @@ init_mem(unsigned nb_mbuf)
snprintf(s, sizeof(s), "mbuf_pool_%d", socketid);
pktmbuf_pool[socketid] =
rte_pktmbuf_pool_create(s, nb_mbuf,
- MEMPOOL_CACHE_SIZE, 0, MBUF_DATA_SIZE,
+ MEMPOOL_CACHE_SIZE, 0,
+ RTE_MBUF_DEFAULT_BUF_SIZE,
socketid);
if (pktmbuf_pool[socketid] == NULL)
rte_exit(EXIT_FAILURE,
diff --git a/examples/l3fwd-power/main.c b/examples/l3fwd-power/main.c
index bb0b66f..6ac342b 100644
--- a/examples/l3fwd-power/main.c
+++ b/examples/l3fwd-power/main.c
@@ -121,8 +121,6 @@
#define MEMPOOL_CACHE_SIZE 256
-#define MBUF_DATA_SIZE (2048 + RTE_PKTMBUF_HEADROOM)
-
/*
* This expression is used to calculate the number of mbufs needed depending on
* user input, taking into account memory for rx and tx hardware rings, cache
@@ -1380,7 +1378,8 @@ init_mem(unsigned nb_mbuf)
snprintf(s, sizeof(s), "mbuf_pool_%d", socketid);
pktmbuf_pool[socketid] =
rte_pktmbuf_pool_create(s, nb_mbuf,
- MEMPOOL_CACHE_SIZE, 0, MBUF_DATA_SIZE,
+ MEMPOOL_CACHE_SIZE, 0,
+ RTE_MBUF_DEFAULT_BUF_SIZE,
socketid);
if (pktmbuf_pool[socketid] == NULL)
rte_exit(EXIT_FAILURE,
diff --git a/examples/l3fwd-vf/main.c b/examples/l3fwd-vf/main.c
index f007bc1..6e56cfb 100644
--- a/examples/l3fwd-vf/main.c
+++ b/examples/l3fwd-vf/main.c
@@ -94,8 +94,6 @@
#define MEMPOOL_CACHE_SIZE 256
-#define MBUF_DATA_SIZE (2048 + RTE_PKTMBUF_HEADROOM)
-
/*
* This expression is used to calculate the number of mbufs needed depending
on user input, taking
* into account memory for rx and tx hardware rings, cache per lcore and
mtable per port per lcore.
@@ -925,8 +923,8 @@ init_mem(unsigned nb_mbuf)
if (pktmbuf_pool[socketid] == NULL) {
snprintf(s, sizeof(s), "mbuf_pool_%d", socketid);
pktmbuf_pool[socketid] = rte_pktmbuf_pool_create(s,
- nb_mbuf, MEMPOOL_CACHE_SIZE, 0, MBUF_DATA_SIZE,
- socketid);
+ nb_mbuf, MEMPOOL_CACHE_SIZE, 0,
+ RTE_MBUF_DEFAULT_BUF_SIZE, socketid);
if (pktmbuf_pool[socketid] == NULL)
rte_exit(EXIT_FAILURE, "Cannot init mbuf pool
on socket %d\n", socketid);
else
diff --git a/examples/l3fwd/main.c b/examples/l3fwd/main.c
index 7871038..e32512e 100644
--- a/examples/l3fwd/main.c
+++ b/examples/l3fwd/main.c
@@ -119,8 +119,6 @@
#define MEMPOOL_CACHE_SIZE 256
-#define MBUF_DATA_SIZE (2048 + RTE_PKTMBUF_HEADROOM)
-
/*
* This expression is used to calculate the number of mbufs needed depending
on user input, taking
* into account memory for rx and tx hardware rings, cache per lcore and
mtable per port per lcore.
@@ -2316,8 +2314,8 @@ init_mem(unsigned nb_mbuf)
snprintf(s, sizeof(s), "mbuf_pool_%d", socketid);
pktmbuf_pool[socketid] =
rte_pktmbuf_pool_create(s, nb_mbuf,
- MEMPOOL_CACHE_SIZE, 0, MBUF_DATA_SIZE,
- socketid);
+ MEMPOOL_CACHE_SIZE, 0,
+ RTE_MBUF_DEFAULT_BUF_SIZE, socketid);
if (pktmbuf_pool[socketid] == NULL)
rte_exit(EXIT_FAILURE,
"Cannot init mbuf pool on
socket %d\n", socketid);
diff --git a/examples/link_status_interrupt/main.c
b/examples/link_status_interrupt/main.c
index 6adbd79..c57a08a 100644
--- a/examples/link_status_interrupt/main.c
+++ b/examples/link_status_interrupt/main.c
@@ -72,7 +72,6 @@
#define RTE_LOGTYPE_LSI RTE_LOGTYPE_USER1
-#define MBUF_DATA_SIZE (2048 + RTE_PKTMBUF_HEADROOM)
#define NB_MBUF 8192
#define MAX_PKT_BURST 32
@@ -615,7 +614,7 @@ main(int argc, char **argv)
/* create the mbuf pool */
lsi_pktmbuf_pool =
rte_pktmbuf_pool_create("mbuf_pool", NB_MBUF, 32, 0,
- MBUF_DATA_SIZE, rte_socket_id());
+ RTE_MBUF_DEFAULT_BUF_SIZE, rte_socket_id());
if (lsi_pktmbuf_pool == NULL)
rte_panic("Cannot init mbuf pool\n");
diff --git a/examples/load_balancer/main.h b/examples/load_balancer/main.h
index 17c0f77..d98468a 100644
--- a/examples/load_balancer/main.h
+++ b/examples/load_balancer/main.h
@@ -83,7 +83,7 @@
/* Mempools */
#ifndef APP_DEFAULT_MBUF_DATA_SIZE
-#define APP_DEFAULT_MBUF_DATA_SIZE (2048 + RTE_PKTMBUF_HEADROOM)
+#define APP_DEFAULT_MBUF_DATA_SIZE RTE_MBUF_DEFAULT_BUF_SIZE
#endif
#ifndef APP_DEFAULT_MEMPOOL_BUFFERS
diff --git a/examples/multi_process/client_server_mp/mp_server/init.c
b/examples/multi_process/client_server_mp/mp_server/init.c
index dc3647d..7afd51a 100644
--- a/examples/multi_process/client_server_mp/mp_server/init.c
+++ b/examples/multi_process/client_server_mp/mp_server/init.c
@@ -71,7 +71,6 @@
#define MBUFS_PER_CLIENT 1536
#define MBUFS_PER_PORT 1536
#define MBUF_CACHE_SIZE 512
-#define MBUF_DATA_SIZE (2048 + RTE_PKTMBUF_HEADROOM)
#define RTE_MP_RX_DESC_DEFAULT 512
#define RTE_MP_TX_DESC_DEFAULT 512
@@ -103,7 +102,7 @@ init_mbuf_pools(void)
printf("Creating mbuf pool '%s' [%u mbufs] ...\n",
PKTMBUF_POOL_NAME, num_mbufs);
pktmbuf_pool = rte_pktmbuf_pool_create(PKTMBUF_POOL_NAME, num_mbufs,
- MBUF_CACHE_SIZE, 0, MBUF_DATA_SIZE, rte_socket_id());
+ MBUF_CACHE_SIZE, 0, RTE_MBUF_DEFAULT_BUF_SIZE, rte_socket_id());
return (pktmbuf_pool == NULL); /* 0 on success */
}
diff --git a/examples/multi_process/l2fwd_fork/main.c
b/examples/multi_process/l2fwd_fork/main.c
index 04a5d20..f2d7eab 100644
--- a/examples/multi_process/l2fwd_fork/main.c
+++ b/examples/multi_process/l2fwd_fork/main.c
@@ -77,7 +77,8 @@
#define RTE_LOGTYPE_L2FWD RTE_LOGTYPE_USER1
#define MBUF_NAME "mbuf_pool_%d"
-#define MBUF_SIZE (2048 + sizeof(struct rte_mbuf) + RTE_PKTMBUF_HEADROOM)
+#define MBUF_SIZE \
+(RTE_MBUF_DEFAULT_DATAROOM + sizeof(struct rte_mbuf) + RTE_PKTMBUF_HEADROOM)
#define NB_MBUF 8192
#define RING_MASTER_NAME "l2fwd_ring_m2s_"
#define RING_SLAVE_NAME "l2fwd_ring_s2m_"
diff --git a/examples/multi_process/symmetric_mp/main.c
b/examples/multi_process/symmetric_mp/main.c
index 7829c86..931c94f 100644
--- a/examples/multi_process/symmetric_mp/main.c
+++ b/examples/multi_process/symmetric_mp/main.c
@@ -78,7 +78,6 @@
#define RTE_LOGTYPE_APP RTE_LOGTYPE_USER1
-#define MBUF_DATA_SIZE (2048 + RTE_PKTMBUF_HEADROOM)
#define NB_MBUFS 64*1024 /* use 64k mbufs */
#define MBUF_CACHE_SIZE 256
#define PKT_BURST 32
@@ -447,7 +446,7 @@ main(int argc, char **argv)
mp = (proc_type == RTE_PROC_SECONDARY) ?
rte_mempool_lookup(_SMP_MBUF_POOL) :
rte_pktmbuf_pool_create(_SMP_MBUF_POOL, NB_MBUFS,
- MBUF_CACHE_SIZE, 0, MBUF_DATA_SIZE,
+ MBUF_CACHE_SIZE, 0, RTE_MBUF_DEFAULT_BUF_SIZE,
rte_socket_id());
if (mp == NULL)
rte_exit(EXIT_FAILURE, "Cannot get memory pool for buffers\n");
diff --git a/examples/netmap_compat/bridge/bridge.c
b/examples/netmap_compat/bridge/bridge.c
index 2d935cb..5adcf61 100644
--- a/examples/netmap_compat/bridge/bridge.c
+++ b/examples/netmap_compat/bridge/bridge.c
@@ -47,7 +47,7 @@
#include "compat_netmap.h"
-#define BUF_SIZE (2048)
+#define BUF_SIZE RTE_MBUF_DEFAULT_DATAROOM
#define MBUF_DATA_SIZE (BUF_SIZE + RTE_PKTMBUF_HEADROOM)
#define MBUF_PER_POOL 8192
diff --git a/examples/packet_ordering/main.c b/examples/packet_ordering/main.c
index 5403c33..1d9a86f 100644
--- a/examples/packet_ordering/main.c
+++ b/examples/packet_ordering/main.c
@@ -50,7 +50,6 @@
#define MAX_PKTS_BURST 32
#define REORDER_BUFFER_SIZE 8192
#define MBUF_PER_POOL 65535
-#define MBUF_DATA_SIZE (1600 + RTE_PKTMBUF_HEADROOM)
#define MBUF_POOL_CACHE_SIZE 250
#define RING_SIZE 16384
@@ -623,7 +622,7 @@ main(int argc, char **argv)
"when using a single port\n");
mbuf_pool = rte_pktmbuf_pool_create("mbuf_pool", MBUF_PER_POOL,
- MBUF_POOL_CACHE_SIZE, 0, MBUF_DATA_SIZE,
+ MBUF_POOL_CACHE_SIZE, 0, RTE_MBUF_DEFAULT_BUF_SIZE,
rte_socket_id());
if (mbuf_pool == NULL)
rte_exit(EXIT_FAILURE, "%s\n", rte_strerror(rte_errno));
diff --git a/examples/qos_meter/main.c b/examples/qos_meter/main.c
index a5e2510..0de5e7f 100644
--- a/examples/qos_meter/main.c
+++ b/examples/qos_meter/main.c
@@ -70,7 +70,6 @@
* Buffer pool configuration
*
***/
-#define MBUF_DATA_SIZE (2048 + RTE_PKTMBUF_HEADROOM)
#define NB_MBUF 8192
#define MEMPOOL_CACHE_SIZE 256
@@ -361,7 +360,7 @@ main(int argc, char **argv)
/* Buffer pool init */
pool = rte_pktmbuf_pool_create("pool", NB_MBUF, MEMPOOL_CACHE_SIZE,
- 0, MBUF_DATA_SIZE, rte_socket_id());
+ 0, RTE_MBUF_DEFAULT_BUF_SIZE, rte_socket_id());
if (pool == NULL)
rte_exit(EXIT_FAILURE, "Buffer pool creation error\n");
diff --git a/examples/qos_sched/init.c b/examples/qos_sched/init.c
index aaf3466..88cf811 100644
--- a/examples/qos_sched/init.c
+++ b/examples/qos_sched/init.c
@@ -336,7 +336,8 @@ int app_init(void)
/* create the mbuf pools for each RX Port */
snprintf(pool_name, MAX_NAME_LEN, "mbuf_pool%u", i);
qos_conf[i].mbuf_pool = rte_pktmbuf_pool_create(pool_name,
- mp_size, burst_conf.rx_burst * 4, 0, MBUF_DATA_SIZE,
+ mp_size, burst_conf.rx_burst * 4, 0,
+ RTE_MBUF_DEFAULT_BUF_SIZE,
rte_eth_dev_socket_id(qos_conf[i].rx_port));
if (qos_conf[i].mbuf_pool == NULL)
rte_exit(EXIT_FAILURE, "Cannot init mbuf pool for
socket %u\n", i);
diff --git a/examples/qos_sched/main.h b/examples/qos_sched/main.h
index 0e6f264..643f1c8 100644
--- a/examples/qos_sched/main.h
+++ b/examples/qos_sched/main.h
@@ -50,7 +50,6 @@ extern "C" {
#define APP_RX_DESC_DEFAULT 128
#define APP_TX_DESC_DEFAULT 256
-#define MBUF_DATA_SIZE (1528 + RTE_PKTMBUF_HEADROOM)
#define APP_RING_SIZE (8*1024)
#define NB_MBUF (2*1024*1024)
diff --git a/examples/quota_watermark/include/conf.h
b/examples/quota_watermark/include/conf.h
index e80aca5..bdc3bbe 100644
--- a/examples/quota_watermark/include/conf.h
+++ b/examples/quota_watermark/include/conf.h
@@ -40,7 +40,7 @@
#define RX_DESC_PER_QUEUE 128
#define TX_DESC_PER_QUEUE 512
-#define MBUF_DATA_SIZE (2048 + RTE_PKTMBUF_HEADROOM)
+#define MBUF_DATA_SIZE RTE_MBUF_DEFAULT_BUF_SIZE
#define MBUF_PER_POOL 8192
#define QUOTA_WATERMARK_MEMZONE_NAME "qw_global_vars"
diff --git a/examples/rxtx_callbacks/main.c b/examples/rxtx_callbacks/main.c
index fb8da51..048b23f 100644
--- a/examples/rxtx_callbacks/main.c
+++ b/examples/rxtx_callbacks/main.c
@@ -43,7 +43,6 @@
#define TX_RING_SIZE 512
#define NUM_MBUFS 8191
-#define MBUF_DATA_SIZE (1600 + RTE_PKTMBUF_HEADROOM)
#define MBUF_CACHE_SIZE 250
#define BURST_SIZE 32
@@ -205,8 +204,8 @@ main(int argc, char *argv[])
rte_exit(EXIT_FAILURE, "Error: number of ports must be even\n");
mbuf_pool = rte_pktmbuf_pool_create("MBUF_POOL",
- NUM_MBUFS * nb_ports, MBUF_CACHE_SIZE, 0, MBUF_DATA_SIZE,
- rte_socket_id());
+ NUM_MBUFS * nb_ports, MBUF_CACHE_SIZE, 0,
+ RTE_MBUF_DEFAULT_BUF_SIZE, rte_socket_id());
if (mbuf_pool == NULL)
rte_exit(EXIT_FAILURE, "Cannot create mbuf pool\n");
diff --git a/examples/skeleton/basicfwd.c b/examples/skeleton/basicfwd.c
index ae606bf..c89822c 100644
--- a/examples/skeleton/basicfwd.c
+++ b/examples/skeleton/basicfwd.c
@@ -43,7 +43,6 @@
#define TX_RING_SIZE 512
#define NUM_MBUFS 8191
-#define MBUF_DATA_SIZE (1600 + RTE_PKTMBUF_HEADROOM)
#define MBUF_CACHE_SIZE 250
#define BURST_SIZE 32
@@ -191,7 +190,7 @@ main(int argc, char *argv[])
/* Creates a new mempool in memory to hold the mbufs. */
mbuf_pool = rte_pktmbuf_pool_create("MBUF_POOL", NUM_MBUFS * nb_ports,
- MBUF_CACHE_SIZE, 0, MBUF_DATA_SIZE, rte_socket_id());
+ MBUF_CACHE_SIZE, 0, RTE_MBUF_DEFAULT_BUF_SIZE, rte_socket_id());
if (mbuf_pool == NULL)
rte_exit(EXIT_FAILURE, "Cannot create mbuf pool\n");
diff --git a/examples/vhost/main.c b/examples/vhost/main.c
index 195d82f..a01a057 100644
--- a/examples/vhost/main.c
+++ b/examples/vhost/main.c
@@ -66,16 +66,16 @@
(num_switching_cores*RTE_TEST_TX_DESC_DEFAULT) +\
(num_switching_cores*MBUF_CACHE_SIZE))
-#define MBUF_CACHE_SIZE 128
-#define MBUF_DATA_SIZE (2048 + RTE_PKTMBUF_HEADROOM)
+#define MBUF_CACHE_SIZE 128
+#define MBUF_DATA_SIZE RTE_MBUF_DEFAULT_BUF_SIZE
/*
* No frame data buffer allocated from host are required for zero copy
* implementation, guest will allocate the frame data buffer, and vhost
* directly use it.
*/
-#define VIRTIO_DESCRIPTOR_LEN_ZCP 1518
-#define MBUF_DATA_SIZE_ZCP (VIRTIO_DESCRIPTOR_LEN_ZCP + RTE_PKTMBUF_HEADROOM)
+#define VIRTIO_DESCRIPTOR_LEN_ZCP RTE_MBUF_DEFAULT_DATAROOM
+#define MBUF_DATA_SIZE_ZCP RTE_MBUF_DEFAULT_BUF_SIZE
#define MBUF_CACHE_SIZE_ZCP 0
#define MAX_PKT_BURST 32 /* Max burst size for RX/TX */
diff --git a/examples/vhost_xen/main.c b/examples/vhost_xen/main.c
index b672bf3..60312b5 100644
--- a/examples/vhost_xen/main.c
+++ b/examples/vhost_xen/main.c
@@ -67,7 +67,6 @@
(num_switching_cores*MBUF_CACHE_SIZE))
#define MBUF_CACHE_SIZE 64
-#define MBUF_DATA_SIZE (2048 + RTE_PKTMBUF_HEADROOM)
/*
* RX and TX Prefetch, Host, and Write-back threshold values should be
@@ -1476,7 +1475,7 @@ main(int argc, char *argv[])
/* Create the mbuf pool. */
mbuf_pool = rte_pktmbuf_pool_create("MBUF_POOL",
NUM_MBUFS_PER_PORT * valid_num_ports, MBUF_CACHE_SIZE, 0,
- MBUF_DATA_SIZE, rte_socket_id());
+ RTE_MBUF_DEFAULT_BUF_SIZE, rte_socket_id());
if (mbuf_pool == NULL)
rte_exit(EXIT_FAILURE, "Cannot create mbuf pool\n");
diff --git a/examples/vmdq/main.c b/examples/vmdq/main.c
index 7596bac..a142d49 100644
--- a/examples/vmdq/main.c
+++ b/examples/vmdq/main.c
@@ -76,7 +76,6 @@
*/
#define NUM_MBUFS_PER_PORT (128*512)
#define MBUF_CACHE_SIZE 64
-#define MBUF_DATA_SIZE (2048 + RTE_PKTMBUF_HEADROOM)
#define MAX_PKT_BURST 32
@@ -615,7 +614,7 @@ main(int argc, char *argv[])
mbuf_pool = rte_pktmbuf_pool_create("MBUF_POOL",
NUM_MBUFS_PER_PORT * nb_ports, MBUF_CACHE_SIZE,
- 0, MBUF_DATA_SIZE, rte_socket_id());
+ 0, RTE_MBUF_DEFAULT_BUF_SIZE, rte_socket_id());
if (mbuf_pool == NULL)
rte_exit(EXIT_FAILURE, "Cannot create mbuf pool\n");
diff --git a/examples/vmdq_dcb/main.c b/examples/vmdq_dcb/main.c
index 3c7f2b3..c31c2ce 100644
--- a/examples/vmdq_dcb/main.c
+++ b/examples/vmdq_dcb/main.c
@@ -74,7 +74,6 @@
#define NUM_MBUFS 64*1024
#define MBUF_CACHE_SIZE 64
-#define MBUF_DATA_SIZE (2048 + RTE_PKTMBUF_HEADROOM)
#define INVALID_PORT_ID 0xFF
@@ -442,7 +441,7 @@ main(int argc, char *argv[])
}
mbuf_pool = rte_pktmbuf_pool_create("MBUF_POOL", NUM_MBUFS * nb_ports,
- MBUF_CACHE_SIZE, 0, MBUF_DATA_SIZE, rte_socket_id());
+ MBUF_CACHE_SIZE, 0, RTE_MBUF_DEFAULT_BUF_SIZE, rte_socket_id());
if (mbuf_pool == NULL)
rte_exit(EXIT_FAILURE, "Cannot create mbuf pool\n");
diff --git a/lib/librte_mbuf/rte_mbuf.h b/lib/librte_mbuf/rte_mbuf.h
index 70b0987..ab6de67 100644
--- a/lib/librte_mbuf/rte_mbuf.h
+++ b/lib/librte_mbuf/rte_mbuf.h
@@ -217,6 +217,16 @@ const char *rte_get_rx_ol_flag_name(uint64_t mask);
*/
const char *rte_get_tx_ol_flag_name(uint64_t mask);
+/**
+ * Some NICs need at least 2KB buffer to RX standard Ethernet frame without
+ * splitting it into multiple segments.
+ * So, for mbufs that planned to be involved into RX/TX, the recommended
+ * minimal buffer length is 2KB + RTE_PKTMBUF_HEADROOM.
+ */
+#define RTE_MBUF_DEFAULT_DATAROOM 2048
+#define RTE_MBUF_DEFAULT_BUF_SIZE \
+ (RTE_MBUF_DEFAULT_DATAROOM + RTE_PKTMBUF_HEADROOM)
+
/* define a set of marker types that can be used to refer to set points in the
* mbuf */
typedef void *MARKER[0]; /**< generic marker for a point in a structure */
--
1.8.3.1
