BR,
Haiyue
> -----Original Message-----
> From: Wang, Haiyue
> Sent: Thursday, July 18, 2019 16:23
> To: Zhang, Xiao <xiao.zh...@intel.com>; dev@dpdk.org
> Cc: Xing, Beilei <beilei.x...@intel.com>; Zhang, Qi Z <qi.z.zh...@intel.com>
> Subject: RE: [DPDK] net/i40e: fix SFP X722 not work with FW4.16
>
> > -----Original Message-----
> > From: Zhang, Xiao
> > Sent: Friday, July 19, 2019 01:14
> > To: dev@dpdk.org
> > Cc: Xing, Beilei <beilei.x...@intel.com>; Wang, Haiyue
> > <haiyue.w...@intel.com>; Zhang, Qi Z
> > <qi.z.zh...@intel.com>; Zhang, Xiao <xiao.zh...@intel.com>
> > Subject: [DPDK] net/i40e: fix SFP X722 not work with FW4.16
> >
> > FW4.16 of SFP X722 does not support setting TPID by set_switch_config
> > adminq operation, for firmware version less than 4.16 TPID is set by
> > register instead. Follow the same path with new firmware version for
> > SFP X722 to make it work.
> >
> > Signed-off-by: Xiao Zhang <xiao.zh...@intel.com>
> > ---
> > drivers/net/i40e/i40e_ethdev.c | 4 +++-
> > 1 file changed, 3 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/net/i40e/i40e_ethdev.c b/drivers/net/i40e/i40e_ethdev.c
> > index 2b9fc45..bf6dc2b 100644
> > --- a/drivers/net/i40e/i40e_ethdev.c
> > +++ b/drivers/net/i40e/i40e_ethdev.c
> > @@ -3708,7 +3708,9 @@ i40e_vlan_tpid_set(struct rte_eth_dev *dev,
> > }
> >
> > /* 802.1ad frames ability is added in NVM API 1.7*/
> > - if (hw->flags & I40E_HW_FLAG_802_1AD_CAPABLE) {
> > + /* FW4.16 for SFP x722 does not support set_switch_config option */
> > + if ((hw->flags & I40E_HW_FLAG_802_1AD_CAPABLE) &&
> > + hw->device_id != I40E_DEV_ID_SFP_X722) {
> > if (qinq) {
> > if (vlan_type == ETH_VLAN_TYPE_OUTER)
> > hw->first_tag = rte_cpu_to_le_16(tpid);
>
> Control the ' I40E_HW_FLAG_802_1AD_CAPABLE ' set or not here is better ?
>
> enum i40e_status_code i40e_init_adminq(struct i40e_hw *hw)
>
> /* The ability to RX (not drop) 802.1ad frames was added in API 1.7 */
> if ((hw->aq.api_maj_ver > 1) ||
> ((hw->aq.api_maj_ver == 1) &&
> (hw->aq.api_min_ver >= 7)))
> hw->flags |= I40E_HW_FLAG_802_1AD_CAPABLE;
>
Looks like changing the share code. Or like :
ret = i40e_init_adminq(hw);
if (ret != I40E_SUCCESS) {
PMD_INIT_LOG(ERR, "Failed to init adminq: %d", ret);
return -EIO;
}
...
clear I40E_HW_FLAG_802_1AD_CAPABLE here ...
> > --
> > 2.7.4
