Function mlx5_flow_validate_item_vlan() validates the user setting
is supported by NIC, using a mask with TCI mask 0x0fff.
This check will reject a flow rule specifying a vlan pcp item.
This patch updates mlx5_flow_validate_item_vlan() to use mask 0xffff,
so flow rules with vlan pcp item are accepted.
Fixes: 23c1d42c7138 ("net/mlx5: split flow validation to dedicated function")
Cc: sta...@dpdk.org
Signed-off-by: Dekel Peled <dek...@mellanox.com>
---
drivers/net/mlx5/mlx5_flow.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/mlx5/mlx5_flow.c b/drivers/net/mlx5/mlx5_flow.c
index 3d2d5fc..ec25fde 100644
--- a/drivers/net/mlx5/mlx5_flow.c
+++ b/drivers/net/mlx5/mlx5_flow.c
@@ -1218,8 +1218,8 @@ uint32_t mlx5_flow_adjust_priority(struct rte_eth_dev
*dev, int32_t priority,
const struct rte_flow_item_vlan *spec = item->spec;
const struct rte_flow_item_vlan *mask = item->mask;
const struct rte_flow_item_vlan nic_mask = {
- .tci = RTE_BE16(0x0fff),
- .inner_type = RTE_BE16(0xffff),
+ .tci = RTE_BE16(UINT16_MAX),
+ .inner_type = RTE_BE16(UINT16_MAX),
};
uint16_t vlan_tag = 0;
const int tunnel = !!(item_flags & MLX5_FLOW_LAYER_TUNNEL);
--
1.8.3.1
