This patch introduces the dependency on libfdt, so we need to disable ipn3ke driver by default in config/common_base, otherwise it would cause a build error.
On 09/26, Andy Pei wrote: >From: Tianfei zhang <tianfei.zh...@intel.com> > >In PAC N3000 card, this is a BMC chip which using MAX10 FPGA >to manage the board configuration, like sensors, flash controller, >QSFP, powers. And this is a SPI bus connected between A10 FPGA and >MAX10, we can access the MAX10 registers over this SPI bus. > >In BMC, there are about 19 sensors in MAX10 chip, including the FPGA >core temperature, Board temperature, board current, voltage and so on. > >We use DTB (Device tree table) to describe it. This DTB file is store >in nor flash partition, which will flashed in Factory when the boards >delivery to customers. And the same time, the customers can easy to >customizate the BMC configuration like change the sensors. > >Add device tree support by using libfdt library in Linux distribution. >The end-user should pre-install the libfdt and libfdt-devel package >before use DPDK on PAC N3000 Card. > >For Centos 7.x: sudo yum install libfdt libfdt-devel >For Ubuntu 18.04: sudo apt install libfdt-dev libfdt1 We'll need to add this info to document. Thanks, Xiaolong