-----Original Message-----
From: Bruce Richardson <bruce.richard...@intel.com>
Sent: Friday, September 27, 2019 12:36 PM
To: Baran, MarcinX <marcinx.ba...@intel.com>
Cc: dev@dpdk.org
Subject: Re: [dpdk-dev] [PATCH v5 6/6] doc/guides/: provide IOAT sample app
guide
On Fri, Sep 20, 2019 at 09:37:14AM +0200, Marcin Baran wrote:
> Added guide for IOAT sample app usage and code description.
>
> Signed-off-by: Marcin Baran <marcinx.ba...@intel.com>
> ---
> doc/guides/sample_app_ug/index.rst | 1 +
> doc/guides/sample_app_ug/intro.rst | 4 +
> doc/guides/sample_app_ug/ioat.rst | 764
> +++++++++++++++++++++++++++++
> 3 files changed, 769 insertions(+)
> create mode 100644 doc/guides/sample_app_ug/ioat.rst
>
> diff --git a/doc/guides/sample_app_ug/index.rst
> b/doc/guides/sample_app_ug/index.rst
> index f23f8f59e..a6a1d9e7a 100644
> --- a/doc/guides/sample_app_ug/index.rst
> +++ b/doc/guides/sample_app_ug/index.rst
> @@ -23,6 +23,7 @@ Sample Applications User Guides
> ip_reassembly
> kernel_nic_interface
> keep_alive
> + ioat
> l2_forward_crypto
> l2_forward_job_stats
> l2_forward_real_virtual
> diff --git a/doc/guides/sample_app_ug/intro.rst
> b/doc/guides/sample_app_ug/intro.rst
> index 90704194a..74462312f 100644
> --- a/doc/guides/sample_app_ug/intro.rst
> +++ b/doc/guides/sample_app_ug/intro.rst
> @@ -91,6 +91,10 @@ examples are highlighted below.
> forwarding, or ``l3fwd`` application does forwarding based on Internet
> Protocol, IPv4 or IPv6 like a simple router.
>
> +* :doc:`Hardware packet copying<ioat>`: The Hardware packet copying,
> + or ``ioatfwd`` application demonstrates how to use IOAT rawdev
> +driver for
> + copying packets between two threads.
> +
> * :doc:`Packet Distributor<dist_app>`: The Packet Distributor
> demonstrates how to distribute packets arriving on an Rx port to different
> cores for processing and transmission.
> diff --git a/doc/guides/sample_app_ug/ioat.rst
> b/doc/guides/sample_app_ug/ioat.rst
> new file mode 100644
> index 000000000..69621673b
> --- /dev/null
> +++ b/doc/guides/sample_app_ug/ioat.rst
> @@ -0,0 +1,764 @@
> +.. SPDX-License-Identifier: BSD-3-Clause
> + Copyright(c) 2019 Intel Corporation.
> +
> +Sample Application of packet copying using Intel\ |reg| QuickData
> +Technology
> +=====================================================================
> +=======
> +
Title is too long, you can drop the "Sample Application" at minimum, since this
is part of the example applications guide document. Call the section "Packet
Copying Using ..."
In order to get the proper (R) symbol, you also need to add an include to the
file. Therefore add the following line just after the copyright:
.. include:: <isonum.txt>
/Bruce
[Marcin] Dropped "Sample Application" and added include.
