Hello,
I am trying to check different flow rules using testpmd (DPDK v19.11), but
facing the following error for any rule that I try:
testpmd> flow validate 0 ingress pattern eth / end actions queue index 6 /
end
port_flow_complain(): Caught PMD error type 16 (specific action): cause:
0x7ffe62373c18, Not supported action.: Invalid argument
testpmd> flow validate 1 ingress pattern eth / end actions queue index 6 /
end
port_flow_complain(): Caught PMD error type 16 (specific action): cause:
0x7ffe62373c18, Not supported action.: Invalid argument
testpmd>
testpmd>
testpmd> flow validate 1 ingress pattern end actions end
port_flow_complain(): Caught PMD error type 16 (specific action): cause:
0x7ffe62373bf8, Not supported action.: Invalid argument
testpmd> flow validate 1 pattern end actions end
port_flow_complain(): Caught PMD error type 16 (specific action): cause:
0x7ffe62373bf8, Not supported action.: Invalid argument
testpmd> flow validate 1 ingress pattern eth / ipv4 / end actions end
port_flow_complain(): Caught PMD error type 16 (specific action): cause:
0x7ffe62373c38, Not supported action.: Invalid argument
testpmd> flow validate 1 ingress pattern eth / ipv4 / end actions drop / end
port_flow_complain(): Caught PMD error type 16 (specific action): cause:
0x7ffe62373c38, Not supported action.: Invalid argument
I have configured 8 rxqs earlier:
testpmd> show config rxtx
io packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 8 Tx queue number: 8
Rx offloads=0x0 Tx offloads=0x0
RX queue: 0
RX desc=1024 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0x0
TX queue: 0
TX desc=1024 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x0 - TX RS bit threshold=32
port 1: RX queue number: 8 Tx queue number: 8
Rx offloads=0x0 Tx offloads=0x0
RX queue: 0
RX desc=1024 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0x0
TX queue: 0
TX desc=1024 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x0 - TX RS bit threshold=32
Kindly let me know if I am doing anything wrong or if my NIC does not support
rte_flow.
Also, is there any resource available where I can find which patterns/actions
are supported in my NIC (for DPDK v19.11)?
I am trying to develop an application which will match GTP packets and
perform decap + queue action on them.
Configuration:
Architecture: x86_64
CPU op-mode(s): 32-bit, 64-bit
Byte Order: Little Endian
CPU(s): 24
On-line CPU(s) list: 0-23
Thread(s) per core: 1
Core(s) per socket: 12
Socket(s): 2
NUMA node(s): 2
Vendor ID: GenuineIntel
CPU family: 6
Model: 79
Model name: Intel(R) Xeon(R) CPU E5-2650 v4 @ 2.20GHz
NIC: 03:00.0 Ethernet controller: Intel Corporation 82599ES 10-Gigabit
SFI/SFP+ Network Connection (rev 01)
03:00.1 Ethernet controller: Intel Corporation 82599ES 10-Gigabit
SFI/SFP+ Network Connection (rev 01)
Thanks and Regards,
Diptyaroop Maji
Department of CSE
IIT Bombay
