From: Huisong Li <lihuis...@huawei.com>

When link information is updated in the firmware, the link information
is updated first and then the link status is updated. In a 1s periodic
task, PF driver queries the link information and then obtains link status.
It may lead to a 1s time difference for obtaining valid link information
when the port is up. Therefore, the query order of driver should be
reversed to the order of firmware.

Fixes: 109e4dd1bd7a ("net/hns3: get link state change through mailbox")
Fixes: 59fad0f32135 ("net/hns3: support link update operation")
Cc: sta...@dpdk.org

Signed-off-by: Huisong Li <lihuis...@huawei.com>
Signed-off-by: Lijun Ou <ouli...@huawei.com>
---
 drivers/net/hns3/hns3_ethdev.c | 27 ++++++++++++++++++++-------
 1 file changed, 20 insertions(+), 7 deletions(-)

diff --git a/drivers/net/hns3/hns3_ethdev.c b/drivers/net/hns3/hns3_ethdev.c
index bd998f6..13f78f2 100644
--- a/drivers/net/hns3/hns3_ethdev.c
+++ b/drivers/net/hns3/hns3_ethdev.c
@@ -93,7 +93,7 @@ static enum hns3_reset_level hns3_get_reset_level(struct 
hns3_adapter *hns,
 static int hns3_dev_mtu_set(struct rte_eth_dev *dev, uint16_t mtu);
 static int hns3_vlan_pvid_configure(struct hns3_adapter *hns, uint16_t pvid,
                                    int on);
-static int hns3_update_speed_duplex(struct rte_eth_dev *eth_dev);
+static int hns3_update_link_info(struct rte_eth_dev *eth_dev);
 static bool hns3_update_link_status(struct hns3_hw *hw);
 
 static int hns3_add_mc_addr(struct hns3_hw *hw,
@@ -2642,8 +2642,8 @@ hns3_dev_link_update(struct rte_eth_dev *eth_dev,
        struct rte_eth_link new_link;
 
        if (!hns3_is_reset_pending(hns)) {
-               hns3_update_speed_duplex(eth_dev);
                hns3_update_link_status(hw);
+               hns3_update_link_info(eth_dev);
        }
 
        memset(&new_link, 0, sizeof(new_link));
@@ -4368,11 +4368,9 @@ hns3_cfg_mac_speed_dup(struct hns3_hw *hw, uint32_t 
speed, uint8_t duplex)
 }
 
 static int
-hns3_update_speed_duplex(struct rte_eth_dev *eth_dev)
+hns3_update_fiber_link_info(struct hns3_hw *hw)
 {
-       struct hns3_adapter *hns = eth_dev->data->dev_private;
-       struct hns3_hw *hw = &hns->hw;
-       struct hns3_pf *pf = &hns->pf;
+       struct hns3_pf *pf = HNS3_DEV_HW_TO_PF(hw);
        uint32_t speed;
        int ret;
 
@@ -4395,6 +4393,21 @@ hns3_update_speed_duplex(struct rte_eth_dev *eth_dev)
 }
 
 static int
+hns3_update_link_info(struct rte_eth_dev *eth_dev)
+{
+       struct hns3_adapter *hns = eth_dev->data->dev_private;
+       struct hns3_hw *hw = &hns->hw;
+       int ret = 0;
+
+       if (hw->mac.media_type == HNS3_MEDIA_TYPE_COPPER)
+               return 0;
+       else if (hw->mac.media_type == HNS3_MEDIA_TYPE_FIBER)
+               ret = hns3_update_fiber_link_info(hw);
+
+       return ret;
+}
+
+static int
 hns3_cfg_mac_mode(struct hns3_hw *hw, bool enable)
 {
        struct hns3_config_mac_mode_cmd *req;
@@ -4509,8 +4522,8 @@ hns3_service_handler(void *param)
        struct hns3_hw *hw = &hns->hw;
 
        if (!hns3_is_reset_pending(hns)) {
-               hns3_update_speed_duplex(eth_dev);
                hns3_update_link_status_and_event(hw);
+               hns3_update_link_info(eth_dev);
        } else {
                hns3_warn(hw, "Cancel the query when reset is pending");
        }
-- 
2.7.4

Reply via email to