The port number of UDP tunneling packet is configurable, which has 16 entries 
in total for i40e.

Signed-off-by: Jijiang Liu <jijiang.liu at intel.com>
---
 examples/tep_termination/main.c        |   19 +++++++++++++++++++
 examples/tep_termination/vxlan_setup.c |   13 ++++++++++++-
 examples/tep_termination/vxlan_setup.h |    1 +
 3 files changed, 32 insertions(+), 1 deletions(-)

diff --git a/examples/tep_termination/main.c b/examples/tep_termination/main.c
index dccd2b0..0f598ff 100644
--- a/examples/tep_termination/main.c
+++ b/examples/tep_termination/main.c
@@ -112,6 +112,7 @@
 #define MAC_ADDR_CMP 0xFFFFFFFFFFFFULL

 #define CMD_LINE_OPT_NB_DEVICES "nb-devices"
+#define CMD_LINE_OPT_UDP_PORT "udp-port"
 #define CMD_LINE_OPT_RX_RETRY "rx-retry"
 #define CMD_LINE_OPT_RX_RETRY_DELAY "rx-retry-delay"
 #define CMD_LINE_OPT_RX_RETRY_NUM "rx-retry-num"
@@ -136,6 +137,9 @@ struct vpool {
        uint32_t buf_size;
 } vpool_array[MAX_QUEUES+MAX_QUEUES];

+/* UDP tunneling port */
+uint16_t udp_port;
+
 /* overlay packet operation */
 struct ol_switch_ops overlay_options = {
        .port_configure = vxlan_port_init,
@@ -260,6 +264,7 @@ static void
 tep_termination_usage(const char *prgname)
 {
        RTE_LOG(INFO, VHOST_CONFIG, "%s [EAL options] -- -p PORTMASK\n"
+       "               --udp-port: UDP destination port for VXLAN packet\n"
        "               --nb-devices[1-64]: The number of virtIO device\n"
        "               -p PORTMASK: Set mask for ports to be used by 
application\n"
        "               --rx-retry [0|1]: disable/enable(default) retries on 
rx."
@@ -285,6 +290,7 @@ tep_termination_parse_args(int argc, char **argv)
        const char *prgname = argv[0];
        static struct option long_option[] = {
                {CMD_LINE_OPT_NB_DEVICES, required_argument, NULL, 0},
+               {CMD_LINE_OPT_UDP_PORT, required_argument, NULL, 0},
                {CMD_LINE_OPT_RX_RETRY, required_argument, NULL, 0},
                {CMD_LINE_OPT_RX_RETRY_DELAY, required_argument, NULL, 0},
                {CMD_LINE_OPT_RX_RETRY_NUM, required_argument, NULL, 0},
@@ -336,6 +342,19 @@ tep_termination_parse_args(int argc, char **argv)
                                        enable_retry = ret;
                        }

+                       if (!strncmp(long_option[option_index].name,
+                                       CMD_LINE_OPT_UDP_PORT,
+                                       sizeof(CMD_LINE_OPT_UDP_PORT))) {
+                               ret = parse_num_opt(optarg, INT16_MAX);
+                               if (ret == -1) {
+                                       RTE_LOG(INFO, VHOST_CONFIG,
+                                               "Invalid argument for UDP port 
[0-N]\n");
+                                       tep_termination_usage(prgname);
+                                       return -1;
+                               } else
+                                       udp_port = ret;
+                       }
+
                        /* Specify the retries delay time (in useconds) on RX.*/
                        if (!strncmp(long_option[option_index].name,
                                CMD_LINE_OPT_RX_RETRY_DELAY,
diff --git a/examples/tep_termination/vxlan_setup.c 
b/examples/tep_termination/vxlan_setup.c
index 3631e1c..54d7984 100644
--- a/examples/tep_termination/vxlan_setup.c
+++ b/examples/tep_termination/vxlan_setup.c
@@ -129,8 +129,12 @@ vxlan_port_init(uint8_t port, struct rte_mempool 
*mbuf_pool)
        uint16_t rx_rings, tx_rings = (uint16_t)rte_lcore_count();
        const uint16_t rx_ring_size = RTE_TEST_RX_DESC_DEFAULT;
        const uint16_t tx_ring_size = RTE_TEST_TX_DESC_DEFAULT;
+       struct rte_eth_udp_tunnel tunnel_udp;
        struct rte_eth_rxconf *rxconf;
        struct rte_eth_txconf *txconf;
+       struct vxlan_conf *pconf = &vxdev;
+
+       pconf->dst_port = udp_port;

        rte_eth_dev_info_get(port, &dev_info);

@@ -176,6 +180,12 @@ vxlan_port_init(uint8_t port, struct rte_mempool 
*mbuf_pool)
        if (retval < 0)
                return retval;

+       /* Configure UDP port for UDP tunneling */
+       tunnel_udp.udp_port = udp_port;
+       tunnel_udp.prot_type = RTE_TUNNEL_TYPE_VXLAN;
+       retval = rte_eth_dev_udp_tunnel_add(port, &tunnel_udp);
+       if (retval < 0)
+               return retval;
        rte_eth_macaddr_get(port, &ports_eth_addr[port]);
        RTE_LOG(INFO, PORT, "Port %u MAC: %02"PRIx8" %02"PRIx8" %02"PRIx8
                        " %02"PRIx8" %02"PRIx8" %02"PRIx8"\n",
@@ -186,13 +196,14 @@ vxlan_port_init(uint8_t port, struct rte_mempool 
*mbuf_pool)
                        ports_eth_addr[port].addr_bytes[3],
                        ports_eth_addr[port].addr_bytes[4],
                        ports_eth_addr[port].addr_bytes[5]);
+
        return 0;
 }

 static int
 vxlan_rx_process(struct rte_mbuf *pkt)
 {
-       return  decapsulation(pkt);
+       return decapsulation(pkt);
 }

 static void
diff --git a/examples/tep_termination/vxlan_setup.h 
b/examples/tep_termination/vxlan_setup.h
index d7e9a29..d5d1b9d 100644
--- a/examples/tep_termination/vxlan_setup.h
+++ b/examples/tep_termination/vxlan_setup.h
@@ -35,6 +35,7 @@
 #define VXLAN_SETUP_H_

 extern uint16_t nb_devices;
+extern uint16_t udp_port;
 extern uint8_t ports[RTE_MAX_ETHPORTS];
 extern struct ether_addr ports_eth_addr[RTE_MAX_ETHPORTS];

-- 
1.7.7.6

Reply via email to