Tested-by: Qian Xu <qian.q.xu at intel.com>
- Test Commit: c4d404d7c1257465176deb5bb8c84e627d2d5eee
- OS/Kernel: Fedora 21/4.1.8
- GCC: gcc (GCC) 4.9.2 20141101 (Red Hat 4.9.2-1)
- CPU: Intel(R) Xeon(R) CPU E5-2699 v3 @ 2.30GHz
- NIC: Intel Corporation 82599ES 10-Gigabit SFI/SFP+ Network Connection (rev 01)
- Target: Intel Corporation 82599ES 10-Gigabit SFI/SFP+ Network Connection (rev
01)
- Total 2 cases, 2 passed, 0 failed. DPDK vhost + legacy virtio or virtio-pmd
can work well with TSO.
Test Case 1: test_dpdk vhost+ virtio-pmd tso
======================================
On host:
1. Start up vhost-switch, mergeable 1 means the jubmo frame feature is enabled.
vm2vm 0 means only one vm without vm to vm communication::
taskset -c 1-3 <dpdk_folder>/examples/vhost/build/vhost-switch -c 0xf -n 4
--huge-dir /mnt/huge --socket-mem 1024,1024 -- -p 1 --mergeable 1 --zero-copy 0
--vm2vm 0 --tso 1 --tx-csum 1
2. Start VM with vhost cuse as backend::
taskset -c 4-6 /home/qxu10/qemu-2.2.0/x86_64-softmmu/qemu-system-x86_64
-object memory-backend-file, id=mem,size=2048M,mem-path=/mnt/huge,share=on
-numa node,memdev=mem -mem-prealloc \
-enable-kvm -m 2048 -smp 4 -cpu host -name dpdk1-vm1 \
-drive file=/home/img/dpdk1-vm1.img \
-netdev tap,id=vhost3,ifname=tap_vhost3,vhost=on,script=no \
-device virtio-net pci,netdev=vhost3,mac=52:54:00:00:00:01,id=net3 \
-netdev tap,id=vhost4,ifname=tap_vhost4,vhost=on,script=no \
-device virtio-net-pci,netdev=vhost4,mac=52:54:00:00:00:02,id=net4 \
-netdev tap,id=ipvm1,ifname=tap3,script=/etc/qemu-ifup -device
rtl8139,netdev=ipvm1,id=net0,mac=00:00:00:00:00:01 \
-localtime -nographic
On guest:
3. ensure the dpdk folder copied to the guest with the same config file and
build process as host. Then bind 2 virtio devices to igb_uio and start testpmd,
below is the step for reference::
./<dpdk_folder>/tools/dpdk_nic_bind.py --bind igb_uio 00:03.0 00:04.0
./<dpdk_folder>/x86_64-native-linuxapp-gcc/app/test-pmd/testpmd -c f -n 4
-- -i --txqflags 0x0f00 --max-pkt-len 9000
$ >set fwd csum
$ >tso set 1000 0
$ >tso set 1000 1
$ >start tx_first
4. Send TCP packets to virtio1, and the packet size is 5000, then at the
virtio side, it will receive 1 packet ant let vhost to do TSO, vhost will let
NIC do TSO, so at IXIA, we expected 5 packets, each ~1k size, then also capture
the received packets and check if the checksum is correct.
Result: All the behavior is expected as step4. So the case is PASS.
Test Case 2: test_dpdk vhost+legacy virtio iperf tso
===========================================
Hardware config: Connect one physical port(port1) to another physical
port(port2). Port1 is the NIC port that will do the TSO.
1. Start dpdk vhost sample, the command is same as above case. Port1 is binded
to igb_uio
2. start VM with 1 virtio
3. let port2 and 1virtio in VM do iperf test, since iperf test will send out
VIRTIO: ifconfig eth0 1.1.1.2
Port2: ifconfig p2p6 1.1.1.8
Make ping work: ping 1.1.1.8
Then run iperf server at port2: iperf -s -I 1
Run iperf client at port1: iperf -c 1.1.1.8 -t 60 -I 1
Check the packet size at virtio and port2 to see if there are many 64KB packet,
if has, then pass. The reason is that vhost/virtio will first negotiate if each
other supports tso, if supports, then the TCP/IP stack will compose BIG packets
such as 64KB, since NIC has the TSO capability, vhost will let NIC do the TSO
work, then at port2, the small packets will be composed to big packets with
TCP/IP stack.
Result: there are many 64KB packet in both virtio and port2, so it is pass.
Thanks
Qian
-----Original Message-----
From: dev [mailto:dev-boun...@dpdk.org] On Behalf Of Thomas Monjalon
Sent: Wednesday, November 04, 2015 9:18 PM
To: Liu, Jijiang
Cc: dev at dpdk.org; Michael S. Tsirkin
Subject: Re: [dpdk-dev] [PATCH v3 6/8] driver/virtio:enqueue vhost TX offload
2015-11-04 12:52, Liu, Jijiang:
> From: Thomas Monjalon [mailto:thomas.monjalon at 6wind.com]
> > Please could you check that your virtio implementation works with a
> > vanilla Linux with or without vhost?
> > Thanks
[...]
> Xu Qian can send the test report out.
Yes please, I'd like to see a test report showing this virtio running with
Linux vhost and without vhost.
We must check that the checksum is well offloaded and sent packets are valids.
Thanks
