Hello, On Mon, Nov 23, 2020 at 8:08 AM Murphy Yang <murphyx.y...@intel.com> wrote: > > If enable hardware outer UDP TX offload checksum, it doesn't take effect > when send 'IPv6/UDP/VXLAN' packet with error outer UDP checksum. > > In order to take effect, set the 'L4T_CS' flag valid only when 'L4TUNT' > equals one and 'EIPT' is not zero. If 'L4T_CS' flag marked, the hardware > can calculate the outer tunneling UDP checksum. > > Fixes: bd70c451532c ("net/ice: support Tx checksum offload for tunnel") > > Signed-off-by: Murphy Yang <murphyx.y...@intel.com> > --- > drivers/net/ice/ice_rxtx.c | 7 +++++-- > 1 file changed, 5 insertions(+), 2 deletions(-) > > diff --git a/drivers/net/ice/ice_rxtx.c b/drivers/net/ice/ice_rxtx.c > index 5fbd68eafc..9769e216bf 100644 > --- a/drivers/net/ice/ice_rxtx.c > +++ b/drivers/net/ice/ice_rxtx.c > @@ -2319,8 +2319,11 @@ ice_parse_tunneling_params(uint64_t ol_flags, > *cd_tunneling |= (tx_offload.l2_len >> 1) << > ICE_TXD_CTX_QW0_NATLEN_S; > > - if ((ol_flags & PKT_TX_OUTER_UDP_CKSUM) && > - (ol_flags & PKT_TX_OUTER_IP_CKSUM) && > + /** > + * Calculate the tunneling UDP checksum. > + * Shall be set only if L4TUNT = 01b and EIPT is not zero > + */ > + if (!(*cd_tunneling & ICE_TX_CTX_EIPT_NONE) &&
drivers/net/ice/base/ice_lan_tx_rx.h: ICE_TX_CTX_EIPT_NONE = 0x0, So this check above is always true... I suspect the intent was: if ((*cd_tunneling & ICE_TXD_CTX_QW0_EIPT_M) != ICE_TX_CTX_EIPT_NONE) > (*cd_tunneling & ICE_TXD_CTX_UDP_TUNNELING)) > *cd_tunneling |= ICE_TXD_CTX_QW0_L4T_CS_M; > } > -- > 2.17.1 > -- David Marchand