The following test suite reflects the fundamental outline for how the
jumbo frames test suite may be designed. The test suite consists of five
individual test cases, each of which assesses the behavior of packet
transmissions for both 1518 byte and 9000 byte frames.
The edge cases are ripped directly from the old DTS framework, and the
general methodology is the same as well. The process, at this point, has
been refactored to operate within the new DTS framework.
Bugzilla ID: 1421
Signed-off-by: Nicholas Pratte <npra...@iol.unh.edu>
---
dts/framework/config/conf_yaml_schema.json | 3 +-
dts/tests/TestSuite_jumboframes.py | 210 +++++++++++++++++++++
2 files changed, 212 insertions(+), 1 deletion(-)
create mode 100644 dts/tests/TestSuite_jumboframes.py
diff --git a/dts/framework/config/conf_yaml_schema.json
b/dts/framework/config/conf_yaml_schema.json
index 4731f4511d..6b9d749022 100644
--- a/dts/framework/config/conf_yaml_schema.json
+++ b/dts/framework/config/conf_yaml_schema.json
@@ -187,7 +187,8 @@
"enum": [
"hello_world",
"os_udp",
- "pmd_buffer_scatter"
+ "pmd_buffer_scatter",
+ "jumboframes"
]
},
"test_target": {
diff --git a/dts/tests/TestSuite_jumboframes.py
b/dts/tests/TestSuite_jumboframes.py
new file mode 100644
index 0000000000..dd253101aa
--- /dev/null
+++ b/dts/tests/TestSuite_jumboframes.py
@@ -0,0 +1,210 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2023-2024 University of New Hampshire
+"""Jumbo frame consistency and compatibility test suite.
+
+The test suite ensures the consistency of jumbo frames transmission within
+Poll Mode Drivers using a series of individual test cases. If a Poll Mode
+Driver receives a packet that is greater than its assigned MTU length, then
+that packet will be dropped, and thus not received. Likewise, if a Poll Mode
Driver
+receives a packet that is less than or equal to a its designated MTU length,
then the
+packet should be transmitted by the Poll Mode Driver, completeing a cycle
within the
+testbed and getting received by the traffic generator. Thus, the following
test suite
+evaluates the behavior within all possible edge cases, ensuring that a test
Poll
+Mode Driver strictly abides by the above implications.
+"""
+
+from framework.test_suite import TestSuite
+from framework.remote_session.testpmd_shell import TestPmdShell
+
+from scapy.layers.inet import IP # type: ignore[import]
+from scapy.layers.l2 import Ether # type: ignore[import]
+from scapy.packet import Raw # type: ignore[import]
+
+ETHER_HEADER_LEN = 18
+IP_HEADER_LEN = 20
+ETHER_STANDARD_MTU = 1518
+ETHER_JUMBO_FRAME_MTU = 9000
+
+
+class TestJumboframes(TestSuite):
+ """DPDK PMD jumbo frames test suite.
+
+ Asserts the expected behavior of frames greater than, less then, or equal
to
+ a designated MTU size in the testpmd application. If a packet size greater
+ than the designated testpmd MTU length is retrieved, the test fails. If a
+ packet size less than or equal to the designated testpmd MTU length is
retrieved,
+ the test passes.
+ """
+
+ def set_up_suite(self) -> None:
+ """Set up the test suite.
+
+ Setup:
+ Set traffic generator MTU lengths to a size greater than scope of
all
+ test cases.
+ """
+ self.tg_node.main_session.configure_port_mtu(
+ ETHER_JUMBO_FRAME_MTU + 200, self._tg_port_egress
+ )
+ self.tg_node.main_session.configure_port_mtu(
+ ETHER_JUMBO_FRAME_MTU + 200, self._tg_port_ingress
+ )
+
+ def send_packet_and_verify(self, pktsize: int, should_receive: bool =
True) -> None:
+ """Generate, send, and capture packets to verify that the sent packet
was received or not.
+
+ Generates a packet based on a specified size and sends it to the SUT.
The desired packet's
+ payload size is calculated, and arbitrary, byte-sized characters are
inserted into the
+ packet before sending. Packets are captured, and depending on the test
case, packet
+ payloads are checked to determine if the sent payload was received.
+
+ Args:
+ pktsize: Size of packet to be generated and sent.
+ should_receive: Indicate whether the test case expects to receive
the packet or not.
+ """
+ pktlength = pktsize - ETHER_HEADER_LEN
+ padding = pktlength - IP_HEADER_LEN
+
+ packet = Ether() / IP(len=pktlength) / Raw(load="\x50" * padding)
+ received_packets = self.send_packet_and_capture(packet)
+
+ found = any(
+ ("\x50" * padding) in str(packets.load)
+ for packets in received_packets
+ if hasattr(packets, "load")
+ )
+
+ print(found)
+ if should_receive:
+ self.verify(found, "Packet pass assert error")
+ else:
+ self.verify(not found, "Packet drop assert error")
+
+ def test_jumboframes_normal_nojumbo(self) -> None:
+ """Assess the boundaries of packets sent less than or equal to the
standard MTU length.
+
+ PMDs are set to the standard MTU length of 1518 to assess behavior of
sent packets less than
+ or equal to this size. Sends two packets: one that is less than 1518
bytes, and another that
+ is equal to 1518 bytes. The test case expects to receive both packets.
+
+ Test:
+ Start testpmd and send packets of sizes 1517 and 1518.
+ """
+ testpmd = self.sut_node.create_interactive_shell(
+ TestPmdShell,
+ app_parameters=(
+ "--max-pkt-len=%s " % (ETHER_STANDARD_MTU) +
"--port-topology=paired "
+ "--tx-offloads=0x8000 "
+ ),
+ privileged=True,
+ )
+ testpmd.start()
+ self.send_packet_and_verify(ETHER_STANDARD_MTU - 1)
+ self.send_packet_and_verify(ETHER_STANDARD_MTU)
+ testpmd.close()
+
+ def test_jumboframes_jumbo_nojumbo(self) -> None:
+ """Assess the boundaries of packets sent greater than standard MTU
length.
+
+ PMDs are set to the standard MTU length of 1518 bytes to assess
behavior of sent packets
+ greater than this size. Sends one packet with a frame size of 1519.
The test cases does
+ not expect to receive this packet.
+
+ Test:
+ Start testpmd with standard MTU size of 1518. Send a packet of
1519 and verify it was
+ not received.
+ """
+ testpmd = self.sut_node.create_interactive_shell(
+ TestPmdShell,
+ app_parameters=(
+ "--max-pkt-len=%s " % (ETHER_STANDARD_MTU) +
"--port-topology=paired "
+ "--tx-offloads=0x8000 "
+ ),
+ privileged=True,
+ )
+ testpmd.start()
+ self.send_packet_and_verify(ETHER_STANDARD_MTU + 1, False)
+ testpmd.close()
+
+ def test_jumboframes_normal_jumbo(self) -> None:
+ """Assess the consistency of standard 1518 byte packets using a 9000
byte jumbo MTU length.
+
+ PMDs are set to a jumbo frame size of 9000 bytes. Packets of sizes
1517 and 1518 are sent
+ to assess the boundaries of packets less than or equal to the standard
MTU length of 1518.
+ The test case expects to receive both packets.
+
+ Test:
+ Start testpmd with a jumbo frame size of 9000 bytes. Send a packet
of 1517 and 1518
+ and verify they were received.
+ """
+ testpmd = self.sut_node.create_interactive_shell(
+ TestPmdShell,
+ app_parameters=(
+ "--max-pkt-len=%s " % (ETHER_JUMBO_FRAME_MTU) +
"--port-topology=paired "
+ "--tx-offloads=0x8000 "
+ ),
+ privileged=True,
+ )
+ testpmd.start()
+ self.send_packet_and_verify(ETHER_STANDARD_MTU - 1)
+ self.send_packet_and_verify(ETHER_STANDARD_MTU)
+ testpmd.close()
+
+ def test_jumboframes_jumbo_jumbo(self) -> None:
+ """Assess the boundaries packets sent at an MTU size of 9000 bytes.
+
+ PMDs are set to a jumbo frames size of 9000 bytes. Packets of size
1519, 8999, and 9000
+ are sent. The test expects to receive all packets.
+
+ Test:
+ Start testpmd with an MTU length of 9000 bytes. Send packets of
size 1519, 8999,
+ and 9000 and verify that all packets were received.
+ """
+ testpmd = self.sut_node.create_interactive_shell(
+ TestPmdShell,
+ app_parameters=(
+ "--max-pkt-len=%s " % (ETHER_JUMBO_FRAME_MTU) +
"--port-topology=paired "
+ "--tx-offloads=0x8000 "
+ ),
+ privileged=True,
+ )
+ testpmd.start()
+ self.send_packet_and_verify(ETHER_STANDARD_MTU + 1)
+ self.send_packet_and_verify(ETHER_JUMBO_FRAME_MTU - 1)
+ self.send_packet_and_verify(ETHER_JUMBO_FRAME_MTU)
+ testpmd.close()
+
+ def test_jumboframes_bigger_jumbo(self) -> None:
+ """Assess the behavior of packets send greater than a specified MTU
length of 9000 bytes.
+
+ PMDs are set to a jumbo frames size of 9000 bytes. A packet of size
9001 is sent to the SUT.
+ The test case does not expect to receive the packet.
+
+ Test:
+ Start testpmd with an MTU length of 9000 bytes. Send a packet of
9001 bytes and verify
+ it was not received.
+ """
+ testpmd = self.sut_node.create_interactive_shell(
+ TestPmdShell,
+ app_parameters=(
+ "--max-pkt-len=%s " % (ETHER_JUMBO_FRAME_MTU) +
"--port-topology=paired "
+ "--tx-offloads=0x8000 "
+ ),
+ privileged=True,
+ )
+ testpmd.start()
+ self.send_packet_and_verify(ETHER_JUMBO_FRAME_MTU + 1, False)
+ testpmd.close()
+
+ def tear_down_suite(self) -> None:
+ """Tear down the test suite.
+
+ Teardown:
+ Set the MTU size of the traffic generator back to the standard
1518 byte size.
+ """
+ self.tg_node.main_session.configure_port_mtu(
+ ETHER_STANDARD_MTU - ETHER_HEADER_LEN, self._tg_port_egress
+ )
+ self.tg_node.main_session.configure_port_mtu(
+ ETHER_STANDARD_MTU - ETHER_HEADER_LEN, self._tg_port_ingress
+ )
--
2.44.0
