I have installed DPDK 2.2 version and didn?t build source coe. From: Marc Sune [mailto:marcde...@gmail.com] Sent: Thursday, April 07, 2016 6:27 PM To: Vivek Gupta <vivek-g at hcl.com> Cc: dev at dpdk.org Subject: Re: [dpdk-dev] Port 0 Link Down - L2fwd sample application
2016-04-07 14:50 GMT+02:00 Vivek Gupta <vivek-g at hcl.com<mailto:vivek-g at hcl.com>>: Hi I have binded eth0 and eth1 with DPDK and then tried to run the l2fwd example as below ./build/l2fwd -c f -n 4 -- -q 8 -p 0x11 but each time I get error ***************************** Checking link status.............. Port 0 Link Down Port 1 Link Down ******************************************** I tried with test-pmd example but same result.Could you please help to up the link? Port status is as below- Network devices using DPDK-compatible driver ============================================ 0000:01:00.0 'Ethernet Controller 10-Gigabit X540-AT2' drv=uio_pci_generic unused=igb_uio 0000:01:00.1 'Ethernet Controller 10-Gigabit X540-AT2' drv=uio_pci_generic unused=igb_uio 0000:06:00.0 'Ethernet Controller 10-Gigabit X540-AT2' drv=uio_pci_generic unused=igb_uio 0000:06:00.1 'Ethernet Controller 10-Gigabit X540-AT2' drv=uio_pci_generic unused=igb_uio Network devices using kernel driver =================================== 0000:81:00.0 'Ethernet Controller 10-Gigabit X540-AT2' if=eth4 drv=ixgbe unused=igb_uio,uio_pci_generic 0000:81:00.1 'Ethernet Controller 10-Gigabit X540-AT2' if=eth5 drv=ixgbe unused=igb_uio,uio_pci_generic Other network devices ===================== <none> Thanks & Regards Vivek Gupta In which commit or version are you? Marc ::DISCLAIMER:: ---------------------------------------------------------------------------------------------------------------------------------------------------- The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only. E-mail transmission is not guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or may contain viruses in transmission. The e mail and its contents (with or without referred errors) shall therefore not attach any liability on the originator or HCL or its affiliates. Views or opinions, if any, presented in this email are solely those of the author and may not necessarily reflect the views or opinions of HCL or its affiliates. Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of this message without the prior written consent of authorized representative of HCL is strictly prohibited. If you have received this email in error please delete it and notify the sender immediately. Before opening any email and/or attachments, please check them for viruses and other defects. ----------------------------------------------------------------------------------------------------------------------------------------------------