From: Chengwen Feng <[email protected]>
On the hardware platform that supports simple BD, if outer-ip, outer-udp
and udp checksum offloading are enabled, the hardware incorrectly
processes the ether+ipv6+vxlan+ether+ipv4+udp packet (the incorrect
field is modified).
The root cause is that the simple BD feature does not exclude outer-udp
checksum. This commit add it.
Fixes: 6393fc0b823c ("net/hns3: simplify hardware checksum offloading")
Cc: [email protected]
Signed-off-by: Chengwen Feng <[email protected]>
Signed-off-by: Xingui Yang <[email protected]>
---
drivers/net/hns3/hns3_rxtx.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/hns3/hns3_rxtx.c b/drivers/net/hns3/hns3_rxtx.c
index 3a99923220..573604b0cd 100644
--- a/drivers/net/hns3/hns3_rxtx.c
+++ b/drivers/net/hns3/hns3_rxtx.c
@@ -3999,8 +3999,9 @@ hns3_handle_simple_bd(struct hns3_tx_queue *txq, struct
hns3_desc *desc,
if (txq->simple_bd_enable && !(m->ol_flags & RTE_MBUF_F_TX_IP_CKSUM) &&
!(m->ol_flags & RTE_MBUF_F_TX_TCP_SEG) &&
!(m->ol_flags & RTE_MBUF_F_TX_OUTER_IP_CKSUM) &&
+ !(m->ol_flags & RTE_MBUF_F_TX_OUTER_UDP_CKSUM) &&
((m->ol_flags & RTE_MBUF_F_TX_L4_MASK) == RTE_MBUF_F_TX_TCP_CKSUM ||
- (m->ol_flags & RTE_MBUF_F_TX_L4_MASK) == RTE_MBUF_F_TX_UDP_CKSUM)) {
+ (m->ol_flags & RTE_MBUF_F_TX_L4_MASK) == RTE_MBUF_F_TX_UDP_CKSUM))
{
/* set checksum start and offset, defined in 2 Bytes */
hns3_set_field(desc->tx.type_cs_vlan_tso_len,
HNS3_TXD_L4_START_M, HNS3_TXD_L4_START_S,
--
2.33.0
