The 25G NIC offers off, RS, Base-R, and auto FEC modes. When
reconfiguring the PHY, the FEC mode must match on both sides;
otherwise, the link cannot come up. The current driver fails to
maintain this requirement, causing link instability.
Add proper FEC mode handling during PHY reconfiguration to
guarantee link establishment.
Fixes: fb6eb170dfa2 ("net/txgbe: add basic link configuration for Amber-Lite")
Cc: [email protected]
Signed-off-by: Zaiyu Wang <[email protected]>
---
drivers/net/txgbe/base/txgbe_aml.c | 13 ++++++++++++-
1 file changed, 12 insertions(+), 1 deletion(-)
diff --git a/drivers/net/txgbe/base/txgbe_aml.c
b/drivers/net/txgbe/base/txgbe_aml.c
index a5b9d951ea..fbb09d144b 100644
--- a/drivers/net/txgbe/base/txgbe_aml.c
+++ b/drivers/net/txgbe/base/txgbe_aml.c
@@ -282,6 +282,14 @@ s32 txgbe_setup_phy_link_aml(struct txgbe_hw *hw,
!(hw->fec_mode & hw->cur_fec_link)))
goto out;
+ if (speed == TXGBE_LINK_SPEED_25GB_FULL &&
+ link_speed == TXGBE_LINK_SPEED_25GB_FULL) {
+ txgbe_e56_fec_polling(hw, &link_up);
+
+ if (link_up)
+ goto out;
+ }
+
rte_spinlock_lock(&hw->phy_lock);
ret_status = txgbe_set_link_to_amlite(hw, speed);
rte_spinlock_unlock(&hw->phy_lock);
@@ -360,7 +368,10 @@ static s32
txgbe_setup_mac_link_multispeed_fiber_aml(struct txgbe_hw *hw,
/* If we already have link at this speed, just jump out */
txgbe_e56_check_phy_link(hw, &link_speed, &link_up);
- if (link_speed == TXGBE_LINK_SPEED_25GB_FULL && link_up)
+ hw->cur_fec_link = txgbe_phy_fec_get(hw);
+
+ if (link_speed == TXGBE_LINK_SPEED_25GB_FULL && link_up &&
+ hw->fec_mode & hw->cur_fec_link)
goto out;
/* Allow module to change analog characteristics (10G -> 25G) */
--
2.21.0.windows.1
