From: Jie Liu <[email protected]> Update the sxe2.ini feature sheet to accurately reflect the recently implemented hardware capabilities in the sxe2 PMD.
Signed-off-by: Jie Liu <[email protected]> --- doc/guides/nics/features/sxe2.ini | 69 +++++++++++++++++++++++++++++++ 1 file changed, 69 insertions(+) diff --git a/doc/guides/nics/features/sxe2.ini b/doc/guides/nics/features/sxe2.ini index 09ba2f558c..c1b4fcb68b 100644 --- a/doc/guides/nics/features/sxe2.ini +++ b/doc/guides/nics/features/sxe2.ini @@ -7,17 +7,86 @@ ; is selected. ; [Features] +Speed capabilities = Y +Link status = Y +Link status event = Y +Rx interrupt = Y Fast mbuf free = P Free Tx mbuf on demand = Y Burst mode info = Y Queue start/stop = Y +Power mgmt address monitor = Y Buffer split on Rx = P Scattered Rx = Y +Traffic manager = Y CRC offload = Y +VLAN offload = Y +QinQ offload = P L3 checksum offload = Y L4 checksum offload = Y +Timestamp offload = P +Inner L3 checksum = P +Inner L4 checksum = P Rx descriptor status = Y Tx descriptor status = Y +MTU update = Y +TSO = P +Promiscuous mode = Y +Allmulticast mode = Y +Unicast MAC filter = Y +RSS hash = Y +RSS key update = Y +RSS reta update = Y +VLAN filter = Y +Inline crypto = Y +Packet type parsing = Y +Timesync = Y +Basic stats = Y +Extended stats = Y +FW version = Y +Module EEPROM dump = Y +Multiprocess aware = Y Linux = Y x86-32 = Y x86-64 = Y + +[rte_flow items] +ah = Y +any = Y +arp_eth_ipv4 = Y +esp = Y +eth = P +gtpu = Y +gtp_psc = Y +icmp = Y +icmp6 = Y +ipv4 = Y +ipv6 = Y +ipv6_frag_ext = Y +l2tpv3oip = Y +nvgre = Y +pfcp = Y +pppoed = Y +pppoes = Y +pppoe_proto_id = Y +raw = Y +sctp = Y +tcp = Y +udp = Y +vlan = P +vxlan = Y +gre = Y +geneve = Y +vxlan_gpe = Y + +[rte_flow actions] +count = Y +drop = Y +mark = Y +passthru = Y +port_representor = Y +queue = Y +represented_port = Y +rss = Y +send_to_kernel = Y +port_id = Y -- 2.52.0
