Update the header file to always include the platform-specific
IPsec MB header. Additionally, guard DOCSIS BPI-related fields
that depend on IPsec MB so they are not included for ARM build.
Fixes: 03c475d609eb ("crypto/qat: require IPsec MB for HMAC precomputes")
Reported-by: Thomas Monjalon <[email protected]>
Signed-off-by: Emma Finn <[email protected]>
---
v2:
* Add guards around DOCSIS BPI
---
drivers/crypto/qat/dev/qat_crypto_pmd_gens.h | 2 ++
drivers/crypto/qat/qat_sym.h | 6 +++++-
drivers/crypto/qat/qat_sym_session.c | 8 +++++++-
drivers/crypto/qat/qat_sym_session.h | 6 +++---
4 files changed, 17 insertions(+), 5 deletions(-)
diff --git a/drivers/crypto/qat/dev/qat_crypto_pmd_gens.h
b/drivers/crypto/qat/dev/qat_crypto_pmd_gens.h
index 22ee0fe4fe..40d5594453 100644
--- a/drivers/crypto/qat/dev/qat_crypto_pmd_gens.h
+++ b/drivers/crypto/qat/dev/qat_crypto_pmd_gens.h
@@ -99,9 +99,11 @@ qat_bpicipher_preprocess(struct qat_sym_session *ctx,
op_bpi_cipher_decrypt(last_block, dst, iv, block_len,
last_block_len, ctx->bpi_ctx);
#else
+#ifndef RTE_ARCH_ARM
bpi_cipher_ipsec(last_block, dst, iv, last_block_len,
ctx->expkey,
ctx->mb_mgr, ctx->docsis_key_len);
#endif
+#endif
#if RTE_LOG_DP_LEVEL >= RTE_LOG_DEBUG
QAT_DP_HEXDUMP_LOG(DEBUG, "BPI: src after pre-process:",
last_block, last_block_len);
diff --git a/drivers/crypto/qat/qat_sym.h b/drivers/crypto/qat/qat_sym.h
index 849e047615..c4e9d16828 100644
--- a/drivers/crypto/qat/qat_sym.h
+++ b/drivers/crypto/qat/qat_sym.h
@@ -175,6 +175,7 @@ bpi_cipher_encrypt(uint8_t *src, uint8_t *dst,
return -EINVAL;
}
#else
+#ifndef RTE_ARCH_ARM
static __rte_always_inline void
bpi_cipher_ipsec(uint8_t *src, uint8_t *dst, uint8_t *iv, int srclen,
uint64_t *expkey, IMB_MGR *m, uint8_t docsis_key_len)
@@ -186,7 +187,8 @@ bpi_cipher_ipsec(uint8_t *src, uint8_t *dst, uint8_t *iv,
int srclen,
else if (docsis_key_len == ICP_QAT_HW_DES_KEY_SZ)
des_cfb_one(dst, src, (uint64_t *)iv, expkey, srclen);
}
-#endif
+#endif /* RTE_ARCH_ARM */
+#endif /* RTE_QAT_OPENSSL */
static inline uint32_t
qat_bpicipher_postprocess(struct qat_sym_session *ctx,
@@ -237,9 +239,11 @@ qat_bpicipher_postprocess(struct qat_sym_session *ctx,
bpi_cipher_encrypt(last_block, dst, iv, block_len,
last_block_len, ctx->bpi_ctx);
#else
+#ifndef RTE_ARCH_ARM
bpi_cipher_ipsec(last_block, dst, iv, last_block_len,
ctx->expkey,
ctx->mb_mgr, ctx->docsis_key_len);
#endif
+#endif
#if RTE_LOG_DP_LEVEL >= RTE_LOG_DEBUG
QAT_DP_HEXDUMP_LOG(DEBUG, "BPI: src after post-process:",
last_block, last_block_len);
diff --git a/drivers/crypto/qat/qat_sym_session.c
b/drivers/crypto/qat/qat_sym_session.c
index 486eb5b54a..6dce9ca786 100644
--- a/drivers/crypto/qat/qat_sym_session.c
+++ b/drivers/crypto/qat/qat_sym_session.c
@@ -204,6 +204,7 @@ bpi_cipher_ctx_init(enum rte_crypto_cipher_algorithm
cryptodev_algo,
#endif
#ifndef RTE_QAT_OPENSSL
+#ifndef RTE_ARCH_ARM
/** Creates a context in either AES or DES in ECB mode
*/
static int
@@ -245,7 +246,8 @@ ipsec_mb_ctx_init(const uint8_t *key, uint16_t key_length,
}
return ret;
}
-#endif
+#endif /* RTE_ARCH_ARM */
+#endif /* RTE_QAT_OPENSSL */
static int
qat_is_cipher_alg_supported(enum rte_crypto_cipher_algorithm algo,
@@ -477,6 +479,7 @@ qat_sym_session_configure_cipher(struct rte_cryptodev *dev,
cipher_xform->key.length,
&session->bpi_ctx);
#else
+#ifndef RTE_ARCH_ARM
session->docsis_key_len = cipher_xform->key.length;
ret = ipsec_mb_ctx_init(
cipher_xform->key.data,
@@ -485,6 +488,7 @@ qat_sym_session_configure_cipher(struct rte_cryptodev *dev,
session->expkey,
session->dust,
&session->mb_mgr);
+#endif
#endif
if (ret != 0) {
QAT_LOG(ERR, "failed to create DES BPI ctx");
@@ -507,6 +511,7 @@ qat_sym_session_configure_cipher(struct rte_cryptodev *dev,
cipher_xform->key.length,
&session->bpi_ctx);
#else
+#ifndef RTE_ARCH_ARM
session->docsis_key_len = cipher_xform->key.length;
ret = ipsec_mb_ctx_init(
cipher_xform->key.data,
@@ -515,6 +520,7 @@ qat_sym_session_configure_cipher(struct rte_cryptodev *dev,
session->expkey,
session->dust,
&session->mb_mgr);
+#endif
#endif
if (ret != 0) {
QAT_LOG(ERR, "failed to create AES BPI ctx");
diff --git a/drivers/crypto/qat/qat_sym_session.h
b/drivers/crypto/qat/qat_sym_session.h
index 0c7b9cc6cf..b18673a1f7 100644
--- a/drivers/crypto/qat/qat_sym_session.h
+++ b/drivers/crypto/qat/qat_sym_session.h
@@ -14,11 +14,11 @@
#include "icp_qat_fw.h"
#include "icp_qat_fw_la.h"
-#ifndef RTE_QAT_OPENSSL
-#ifndef RTE_ARCH_ARM
+#ifdef RTE_ARCH_ARM
+#include <ipsec-mb.h>
+#else
#include <intel-ipsec-mb.h>
#endif
-#endif
/*
* Key Modifier (KM) value used in KASUMI algorithm in F9 mode to XOR
--
2.43.0
