From: Oleg Akhrem <[email protected]> Add definitions for the Get Wake Packet Admin Queue command (opcode 0x0122), which retrieves the firmware-saved packet that caused a Wake Up event.
Define the command opcode, the command descriptor and the maximum response buffer size. Signed-off-by: Oleg Akhrem <[email protected]> Signed-off-by: Anatoly Burakov <[email protected]> --- drivers/net/intel/i40e/base/i40e_adminq_cmd.h | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/drivers/net/intel/i40e/base/i40e_adminq_cmd.h b/drivers/net/intel/i40e/base/i40e_adminq_cmd.h index eda19ccf32..d41a6d592a 100644 --- a/drivers/net/intel/i40e/base/i40e_adminq_cmd.h +++ b/drivers/net/intel/i40e/base/i40e_adminq_cmd.h @@ -138,6 +138,7 @@ enum i40e_admin_queue_opc { /* WoL commands */ i40e_aqc_opc_set_wol_filter = 0x0120, i40e_aqc_opc_get_wake_reason = 0x0121, + i40e_aqc_opc_get_wake_packet = 0x0122, i40e_aqc_opc_clear_all_wol_filters = 0x025E, /* internal switch commands */ @@ -629,6 +630,17 @@ struct i40e_aqc_get_wake_reason_completion { I40E_CHECK_CMD_LENGTH(i40e_aqc_get_wake_reason_completion); +/* Get Wake Packet (0x0122) */ +#define I40E_AQC_GET_WAKE_PACKET_BUFFER_SIZE 0x600 + +struct i40e_aqc_get_wake_packet { + u8 reserved[8]; + __le32 address_high; + __le32 address_low; +}; + +I40E_CHECK_CMD_LENGTH(i40e_aqc_get_wake_packet); + /* Switch configuration commands (0x02xx) */ /* Used by many indirect commands that only pass an seid and a buffer in the -- 2.52.0
