Remove the dev_started check in nbl_mtu_set() to allow MTU configuration while the port is started.
Signed-off-by: Dimon Zhao <[email protected]> --- drivers/net/nbl/nbl_dev/nbl_dev.c | 7 ------- 1 file changed, 7 deletions(-) diff --git a/drivers/net/nbl/nbl_dev/nbl_dev.c b/drivers/net/nbl/nbl_dev/nbl_dev.c index e41732ccd3..2c1e39f559 100644 --- a/drivers/net/nbl/nbl_dev/nbl_dev.c +++ b/drivers/net/nbl/nbl_dev/nbl_dev.c @@ -753,18 +753,11 @@ int nbl_xstats_reset(struct rte_eth_dev *eth_dev) int nbl_mtu_set(struct rte_eth_dev *eth_dev, uint16_t mtu) { - struct rte_eth_dev_data *dev_data = eth_dev->data; struct nbl_adapter *adapter = ETH_DEV_TO_NBL_DEV_PF_PRIV(eth_dev); struct nbl_dev_mgt *dev_mgt = NBL_ADAPTER_TO_DEV_MGT(adapter); struct nbl_dispatch_ops *disp_ops = NBL_DEV_MGT_TO_DISP_OPS(dev_mgt); int ret; - /* mtu setting is forbidden if port is started */ - if (dev_data->dev_started) { - NBL_LOG(ERR, "port %d must be stopped before configuration", dev_data->port_id); - return -EBUSY; - } - ret = disp_ops->set_mtu(NBL_DEV_MGT_TO_DISP_PRIV(dev_mgt), dev_mgt->net_dev->vsi_id, mtu); if (ret) return ret; -- 2.34.1
