Correct several errors in the i40e guide:

- use the full "Malicious Driver Detection" feature name.
- correct the queue region device argument text ("serves for" wording
  and the "off" entry formatting).
- describe "set vf allmulti" as all-multicast mode instead of the
  copy-pasted promiscuous-mode description.
- minor grammar and spacing fixes.

Fixes: 9accffad6593 ("net/i40e: add PF MDD event handler")
Cc: [email protected]

Signed-off-by: Sandeep Penigalapati <[email protected]>
---
 doc/guides/nics/i40e.rst | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/doc/guides/nics/i40e.rst b/doc/guides/nics/i40e.rst
index 29234dbf0f..2cfe3b91de 100644
--- a/doc/guides/nics/i40e.rst
+++ b/doc/guides/nics/i40e.rst
@@ -43,7 +43,7 @@ Features of the i40e PMD are:
 - Dynamic Device Personalization (DDP)
 - Queue region configuration
 - Virtual Function Port Representors
-- Malicious Device Drive event catch and notify
+- Malicious Driver Detection event catch and notify
 - Generic flow API
 
 Linux Prerequisites
@@ -537,7 +537,7 @@ Display information about a GTP profile:
 
 Input set configuration
 ~~~~~~~~~~~~~~~~~~~~~~~
-Input set for any PCTYPE can be configured with user defined configuration,
+Input set for any PCTYPE can be configured with user defined configuration.
 For example, to use only 48bit prefix for IPv6 src address for IPv6 TCP RSS:
 
 .. code-block:: console
@@ -669,7 +669,7 @@ If a TC is set to strict priority mode, it can consume 
unlimited bandwidth.
 It means if APP has set the max bandwidth for that TC, it comes to no
 effect.
 It's suggested to set the strict priority mode for a TC that is latency
-sensitive but no consuming much bandwidth.
+sensitive but not consuming much bandwidth.
 
 DCB function
 ~~~~~~~~~~~~
@@ -721,7 +721,7 @@ Set flowtype mapping on a RSS queue region on a port::
 
 where:
 
-* For the flowtype(pctype) of packet,the specific index for each type has
+* For the flowtype(pctype) of packet, the specific index for each type has
   been defined in file i40e_type.h as enum i40e_filter_pctype.
 
 Set user priority mapping on a RSS queue region on a port::
@@ -734,12 +734,12 @@ Flush all queue region related configuration on a port::
 
 where:
 
-* ``on``: is just an enable function which server for other configuration,
+* ``on``: is just an enable function which serves for other configuration,
   it is for all configuration about queue region from up layer,
   at first will only keep in DPDK software stored in driver,
   only after "flush on", it commit all configuration to HW.
 
-* ``"off``: is just clean all configuration about queue region just now,
+* ``off``: is just clean all configuration about queue region just now,
   and restore all to DPDK i40e driver default config when start up.
 
 Show all queue region related configuration info on a port::
@@ -765,7 +765,7 @@ set allmulticast (for VF)
 
 Set the multicast promiscuous mode for a VF from PF.
 It's supported by Intel i40e NICs now.
-In promiscuous mode packets are not dropped if they aren't for the specified 
MAC address::
+In all-multicast mode all multicast packets are received regardless of the 
multicast address filter::
 
    testpmd> set vf allmulti (port_id) (vf_id) (on|off)
 
@@ -858,7 +858,7 @@ where:
 
 * ``target``: A specific software ptype or a mask to represent a group of 
software ptypes.
 
-* ``mask``: A flag indicate if "target" is a specific software ptype(=0) or a 
ptype mask(=1).
+* ``mask``: A flag indicates if "target" is a specific software ptype(=0) or a 
ptype mask(=1).
 
 * ``pkt_type``: The new software ptype to replace the old ones.
 
-- 
2.34.1

Reply via email to