Hi Uday,
> I have an issue in running qos_sched application in DPDK .Could someone tell > me how to run the command and what each parameter does In the below > mentioned text. > > Application mandatory parameters: > --pfc "RX PORT, TX PORT, RX LCORE, WT LCORE" : Packet flow configuration > multiple pfc can be configured in command line RX PORT - Specifies the packets receive port TX PORT - Specifies the packets transmit port RXCORE - Specifies the Core used for Packet reception and Classification stage of the QoS application. WTCORE- Specifies the Core used for Packet enqueue/dequeue operation (QoS scheduling) and subsequently transmitting the packets out. Multiple pfc can be specified depending upon the number of instances of qos sched required in application. For example- in order to run two instance, following can be used- ./build/qos_sched -c 0x7e -n 4 -- --pfc "0,1,2,3,4" --pfc "2,3,5,6" --cfg "profile.cfg" First instance of qos sched receives packets from port 0 and transmits its packets through port 1 ,while second qos sched will receives packets from port 2 and transmit through port 3. In case of single qos sched instance, following can be used- ./build/qos_sched -c 0x1e -n 4 -- --pfc "0,1,2,3,4" --cfg "profile.cfg" Thanks, Jasvinder