Hi Pablo, <snip>
> > Subject: [PATCH v3 4/9] app/testpmd: remove fwd_config_setup from > > fwd_config_display > > > > Remove fwd_config_setup from fwd_config_display and check that > > forwarding has been setup before displaying forwarding configuration. > > Add call to fwd_config_setup for corelist, coremask, nbcore setup. > > Add call to fwd_config_setup for portlist, portmask, nbport setup. > > Probably we need to add that call to the commands that change number of > RX/TX queues, as well. I will check this. > > Signed-off-by: Bernard Iremonger <bernard.iremonger at intel.com> > > --- > > app/test-pmd/cmdline.c | 23 ++++++++++++++++------- > > app/test-pmd/config.c | 6 ++++-- > > 2 files changed, 20 insertions(+), 9 deletions(-) > > > > [...] > > > --- a/app/test-pmd/config.c > > +++ b/app/test-pmd/config.c > > @@ -1424,8 +1424,10 @@ pkt_fwd_config_display(struct fwd_config *cfg) > > void > > fwd_config_display(void) > > { > > - fwd_config_setup(); > > - pkt_fwd_config_display(&cur_fwd_config); > > + if (cur_fwd_config.nb_fwd_ports) > > + pkt_fwd_config_display(&cur_fwd_config); > > + else > > + printf("Please set portlist first\n"); > > I think this is not necessary. I would call fwd_config_setup() at startup, so > everything is setup when this is called (even if it is the first command when > the prompt comes up). > I think at the end of init_config() is a good place. Ok, I will try this. <snip> Regards, Bernard.