On 2/27/2017 7:56 AM, Rasesh Mody wrote: > Hi, > > This patch set adds support for new firmware 8.18.9.0, new features and > bug fixes.
This looks like depends other qede driver patchset [1], can you please confirm? If so, it helps to mention from it here. Also I am getting following build errors [2]. And there are some checkpatch and check-git-log.sh [3] errors. Thanks, ferruh [1] http://dpdk.org/dev/patchwork/patch/20816/ [patchset with 21 patches] [2] .../drivers/net/qede/base/ecore_dev.c:1703:4: error: use of undeclared identifier 'ECORE_E5_MISSING_CODE' ECORE_E5_MISSING_CODE; ^ 1 error generated. make[7]: *** [base/ecore_dev.o] Error 1 make[7]: *** Waiting for unfinished jobs.... .../drivers/net/qede/qede_rxtx.c:1202:21: error: variable 'pad' is uninitialized when used here [-Werror,-Wuninitialized] rx_mb->data_off = pad + RTE_PKTMBUF_HEADROOM; ^~~ .../drivers/net/qede/qede_rxtx.c:997:14: note: initialize the variable 'pad' to silence this warning uint16_t pad; ^ = 0 1 error generated. .../drivers/net/qede/qede_fdir.c: In function ‘qede_config_cmn_fdir_filter’: .../drivers/net/qede/qede_fdir.c:126:44: error: format ‘%lx’ expects argument of type ‘long unsigned int’, but argument 4 has type ‘uint64_t {aka long long unsigned int}’ [-Werror=format=] snprintf(mz_name, sizeof(mz_name) - 1, "%lx", rte_get_timer_cycles()); [3] Wrong headline format: send FW version driver state to MFW net/qede/base: decrease MAX_HWFNS_PER_DEVICE from 4 to 2 net/qede/base: add a printout of the FW, MFW and MBI versions net/qede/base: set the drv_type before sending load request Wrong headline prefix: send FW version driver state to MFW drivers/net/qede: upgrade the FW to 8.18.9.0 Wrong headline uppercase: net/qede/base: L2 handler changes net/qede/base: Add support to set max values of soft resoruces Wrong headline lowercase: net/qede/base: use default mtu from shared memory net/qede/base: update MFW when default mtu is changed net/qede/base: add non-l2 dcbx tlv application support net/qede/base: allow PMD to control vport-id and rss-eng-id Headline too long: net/qede/base: remove attribute field from update current config net/qede/base: add support to read personality via MFW commands net/qede/base: allow only trusted VFs to be promisc/multi-promisc net/qede/base: add a printout of the FW, MFW and MBI versions net/qede/base: update bulletin board with link state during init net/qede/base: Add support to set max values of soft resoruces net/qede/base: add multi-Txq support on same queue-zone for VFs net/qede/base: fix race cond between MFW attentions and PF stop Missing 'Fixes' tag: net/qede/base: fix to set pointers to NULL after freeing net/qede/base: fix race cond between MFW attentions and PF stop > > Please apply to dpdk-net-next for 17.05 release. > > Thanks! > Rasesh > > Harish Patil (3): > net/qede/base: add support for arfs mode > net/qede: add ntuple and flow director filter support > net/qede: add LRO/TSO offloads support > > Rasesh Mody (58): > net/qede/base: return an initialized return value > send FW version driver state to MFW > net/qede/base: mask Rx buffer attention bits > net/qede/base: print various indication on Tx-timeouts > net/qede/base: utilize FW 8.18.9.0 > drivers/net/qede: upgrade the FW to 8.18.9.0 > net/qede/base: decrease MAX_HWFNS_PER_DEVICE from 4 to 2 > net/qede/base: move mask constants defining NIC type > net/qede/base: remove attribute field from update current config > net/qede/base: add nvram options > net/qede/base: add comment > net/qede/base: use default mtu from shared memory > net/qede/base: change queue/sb-id from 8 bit to 16 bit > net/qede/base: update MFW when default mtu is changed > net/qede/base: prevent device init failure > net/qede/base: add support to read personality via MFW commands > net/qede/base: allow probe to succeed with minor HW-issues > net/qede/base: remove unneeded step in HW init > net/qede/base: allow only trusted VFs to be promisc/multi-promisc > net/qede/base: qm initialization revamp > net/qede/base: add a printout of the FW, MFW and MBI versions > net/qede/base: check active VF queues before stopping > net/qede/base: set the drv_type before sending load request > net/qede/base: prevent driver laod with invalid resources > net/qede/base: add interfaces for MFW TLV request processing > net/qede/base: fix to set pointers to NULL after freeing > net/qede/base: L2 handler changes > net/qede/base: add support for handling TLV request from MFW > net/qede/base: optimize cache-line access > net/qede/base: infrastructure changes for VF tunnelling > net/qede/base: revise tunnel APIs/structs > net/qede/base: add tunnelling support for VFs > net/qede/base: formatting changes > net/qede/base: prevent transmitter stuck condition > net/qede/base: add mask/shift defines for resource command > net/qede/base: add API for using MFW resource lock > net/qede/base: remove clock slowdown option > net/qede/base: add new image types > net/qede/base: use L2-handles for RSS configuration > net/qede/base: change valloc to vzalloc > net/qede/base: add support for previous driver unload > net/qede/base: add non-l2 dcbx tlv application support > net/qede/base: update bulletin board with link state during init > net/qede/base: add coalescing support for VFs > net/qede/base: add macro got resource value message > net/qede/base: add mailbox for resource allocation > net/qede/base: add macro for unsupported command > net/qede/base: Add support to set max values of soft resoruces > net/qede/base: add return code check > net/qede/base: zero out MFW mailbox data > net/qede/base: move code bits > net/qede/base: add PF parameter > net/qede/base: allow PMD to control vport-id and rss-eng-id > net/qede/base: add udp ports in bulletin board message > net/qede/base: prevent DMAE transactions during recovery > net/qede/base: add multi-Txq support on same queue-zone for VFs > net/qede/base: fix race cond between MFW attentions and PF stop > net/qede/base: semantic changes <...>
