On 7/4/2017 5:46 PM, Declan Doherty wrote:
> From: Tomasz Kulasek <[email protected]>
>
> Add support for hardware flow classification of LACP control plane
> traffic to be redirect to a dedicated receive queue on each slave which
> is not visible to application. Also enables a dedicate transmit queue
> for LACP traffic which allows complete decoupling of control and data
> paths.
>
> This only applies to bonding devices running in mode 4
> (link-aggegration-802.3ad).
>
> Introduce two new APIs to support enable/disabled of dedicated
> queues.
>
> - rte_eth_bond_8023ad_dedicated_queues_enable
> - rte_eth_bond_8023ad_dedicated_queues_disable
>
> rte_eth_bond_8023ad_dedicated_queues_enable must be called before
> bonding port is configured or started to reserved and configure the
> dedicated queuesh.
>
> When this option is enabled all slaves must support flow filtering
> by ethernet type and support one additional tx and rx queue on
> each slave.
>
> Signed-off-by: Tomasz Kulasek <[email protected]>
> Signed-off-by: Declan Doherty <[email protected]>
<...>
> +
> +DPDK_17.08 {
> + global:
> +
> + rte_eth_bond_8023ad_dedicated_queues_enable;
> + rte_eth_bond_8023ad_dedicated_queues_disable;
> +
> + local: *;
This line is not required.
> +} DPDK_17.05;
And this should be DPDK_16.07, otherwise breaking shared build.
I will fix above ones while applying.
>
