[dpdk-dev] [PATCH 1/1] net/ixgbe: Add API to update SBP bit

[Shweta Choudaha]

From: Shweta Choudaha <shweta.choud...@att.com>

Add ixgbe API to enable SBP bit in FCTRL register
to allow receiving packets that may otherwise be
considered length errors by ixgbe and dropped

Signed-off-by: Shweta Choudaha <shweta.choud...@att.com>
Reviewed-by: Chas Williams <ch...@att.com>
Reviewed-by: Luca Boccassi <bl...@debian.org>
---
 drivers/net/ixgbe/rte_pmd_ixgbe.c           | 28 ++++++++++++++++++++++++++++
 drivers/net/ixgbe/rte_pmd_ixgbe.h           | 13 +++++++++++++
 drivers/net/ixgbe/rte_pmd_ixgbe_version.map |  6 ++++++
 3 files changed, 47 insertions(+)

diff --git a/drivers/net/ixgbe/rte_pmd_ixgbe.c 
b/drivers/net/ixgbe/rte_pmd_ixgbe.c
index d8ca8ca31..3b6f68f9e 100644
--- a/drivers/net/ixgbe/rte_pmd_ixgbe.c
+++ b/drivers/net/ixgbe/rte_pmd_ixgbe.c
@@ -880,6 +880,34 @@ rte_pmd_ixgbe_set_tc_bw_alloc(uint16_t port,
        return 0;
 }
 
+int __rte_experimental
+rte_pmd_ixgbe_upd_fctrl_sbp(uint16_t port, int enable)
+{
+       struct ixgbe_hw *hw;
+       struct rte_eth_dev *dev;
+       uint32_t fctrl;
+
+       RTE_ETH_VALID_PORTID_OR_ERR_RET(port, -ENODEV);
+       dev = &rte_eth_devices[port];
+       if (!is_ixgbe_supported(dev))
+               return -ENOTSUP;
+
+       hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+       if (!hw)
+               return -ENOTSUP;
+
+       fctrl = IXGBE_READ_REG(hw, IXGBE_FCTRL);
+
+       /* If 'enable' set the SBP bit else clear it */
+       if (enable)
+               fctrl |= IXGBE_FCTRL_SBP;
+       else
+               fctrl &= ~(IXGBE_FCTRL_SBP);
+
+       IXGBE_WRITE_REG(hw, IXGBE_FCTRL, fctrl);
+       return 0;
+}
+
 #ifdef RTE_LIBRTE_IXGBE_BYPASS
 int
 rte_pmd_ixgbe_bypass_init(uint16_t port_id)
diff --git a/drivers/net/ixgbe/rte_pmd_ixgbe.h 
b/drivers/net/ixgbe/rte_pmd_ixgbe.h
index 11a9f334b..a3026bd98 100644
--- a/drivers/net/ixgbe/rte_pmd_ixgbe.h
+++ b/drivers/net/ixgbe/rte_pmd_ixgbe.h
@@ -637,4 +637,17 @@ enum {
        ((x) > RTE_PMD_IXGBE_BYPASS_TMT_OFF &&  \
        (x) < RTE_PMD_IXGBE_BYPASS_TMT_NUM))
 
+/**
+ * @param port
+ *   The port identifier of the Ethernet device.
+ * @param enable
+ *    0 to disable and nonzero to enable 'SBP' bit in FCTRL register
+ *    to receive all packets
+ * @return
+ *   - (0) if successful.
+ *   - (-ENODEV) if *port* invalid.
+ *   - (-ENOTSUP) if hardware doesn't support this feature.
+ */
+int __rte_experimental
+rte_pmd_ixgbe_upd_fctrl_sbp(uint16_t port, int enable);
 #endif /* _PMD_IXGBE_H_ */
diff --git a/drivers/net/ixgbe/rte_pmd_ixgbe_version.map 
b/drivers/net/ixgbe/rte_pmd_ixgbe_version.map
index bf776742c..a360d383b 100644
--- a/drivers/net/ixgbe/rte_pmd_ixgbe_version.map
+++ b/drivers/net/ixgbe/rte_pmd_ixgbe_version.map
@@ -52,3 +52,9 @@ DPDK_17.08 {
        rte_pmd_ixgbe_bypass_wd_timeout_show;
        rte_pmd_ixgbe_bypass_wd_timeout_store;
 } DPDK_17.05;
+
+EXPERIMENTAL {
+       global:
+
+       rte_pmd_ixgbe_upd_fctrl_sbp;
+} DPDK_17.08;
-- 
2.11.0