On Fri, Apr 13, 2018 at 02:48:17PM +0000, Xueming(Steven) Li wrote:
>
>
> > -----Original Message-----
> > From: Nélio Laranjeiro <nelio.laranje...@6wind.com>
> > Sent: Friday, April 13, 2018 9:37 PM
> > To: Xueming(Steven) Li <xuemi...@mellanox.com>
> > Cc: Shahaf Shuler <shah...@mellanox.com>; dev@dpdk.org
> > Subject: Re: [PATCH v3 11/14] net/mlx5: support MPLS-in-GRE and MPLS-in-
> > UDP
> >
> > Some nits,
> >
> > On Fri, Apr 13, 2018 at 07:20:20PM +0800, Xueming Li wrote:
> > > This patch supports new tunnel type MPLS-in-GRE and MPLS-in-UDP.
> > > Flow pattern example:
> > > ipv4 proto is 47 / gre proto is 0x8847 / mpls
> > > ipv4 / udp dst is 6635 / mpls / end
> > >
> > > Signed-off-by: Xueming Li <xuemi...@mellanox.com>
> > > ---
> > > drivers/net/mlx5/Makefile | 5 ++
> > > drivers/net/mlx5/mlx5.c | 15 +++++
> > > drivers/net/mlx5/mlx5.h | 1 +
> > > drivers/net/mlx5/mlx5_flow.c | 148
> > > ++++++++++++++++++++++++++++++++++++++++++-
> > > 4 files changed, 166 insertions(+), 3 deletions(-)
> > >
> > > diff --git a/drivers/net/mlx5/Makefile b/drivers/net/mlx5/Makefile
> > > index f9a6c460b..33553483e 100644
> > > --- a/drivers/net/mlx5/Makefile
> > > +++ b/drivers/net/mlx5/Makefile
> > > @@ -131,6 +131,11 @@ mlx5_autoconf.h.new: $(RTE_SDK)/buildtools/auto-
> > config-h.sh
> > > enum MLX5DV_CONTEXT_MASK_TUNNEL_OFFLOADS \
> > > $(AUTOCONF_OUTPUT)
> > > $Q sh -- '$<' '$@' \
> > > + HAVE_IBV_DEVICE_MPLS_SUPPORT \
> > > + infiniband/verbs.h \
> > > + enum IBV_FLOW_SPEC_MPLS \
> > > + $(AUTOCONF_OUTPUT)
> > > + $Q sh -- '$<' '$@' \
> > > HAVE_IBV_WQ_FLAG_RX_END_PADDING \
> > > infiniband/verbs.h \
> > > enum IBV_WQ_FLAG_RX_END_PADDING \
> > > diff --git a/drivers/net/mlx5/mlx5.c b/drivers/net/mlx5/mlx5.c index
> > > 38118e524..89b683d6e 100644
> > > --- a/drivers/net/mlx5/mlx5.c
> > > +++ b/drivers/net/mlx5/mlx5.c
> > > @@ -614,6 +614,7 @@ mlx5_pci_probe(struct rte_pci_driver *pci_drv
> > __rte_unused,
> > > unsigned int cqe_comp;
> > > unsigned int tunnel_en = 0;
> > > unsigned int verb_priorities = 0;
> > > + unsigned int mpls_en = 0;
> > > int idx;
> > > int i;
> > > struct mlx5dv_context attrs_out = {0}; @@ -720,12 +721,25 @@
> > > mlx5_pci_probe(struct rte_pci_driver *pci_drv __rte_unused,
> > > MLX5DV_RAW_PACKET_CAP_TUNNELED_OFFLOAD_VXLAN) &&
> > > (attrs_out.tunnel_offloads_caps &
> > > MLX5DV_RAW_PACKET_CAP_TUNNELED_OFFLOAD_GRE));
> > > +#ifdef HAVE_IBV_DEVICE_MPLS_SUPPORT
> > > + mpls_en = ((attrs_out.tunnel_offloads_caps &
> > > + MLX5DV_RAW_PACKET_CAP_TUNNELED_OFFLOAD_MPLS_GRE) &&
> > > + (attrs_out.tunnel_offloads_caps &
> > > + MLX5DV_RAW_PACKET_CAP_TUNNELED_OFFLOAD_MPLS_UDP) &&
> > > + (attrs_out.tunnel_offloads_caps &
> > > + MLX5DV_RAW_PACKET_CAP_TUNNELED_OFFLOAD_CTRL_DW_MPLS));
> > > +#endif
> > > }
> > > DRV_LOG(DEBUG, "tunnel offloading is %ssupported",
> > > tunnel_en ? "" : "not ");
> > > + DRV_LOG(DEBUG, "MPLS over GRE/UDP offloading is %ssupported",
> > > + mpls_en ? "" : "not ");
> > > #else
> > > DRV_LOG(WARNING,
> > > "tunnel offloading disabled due to old OFED/rdma-core
> > version");
> > > + DRV_LOG(WARNING,
> > > + "MPLS over GRE/UDP offloading disabled due to old"
> > > + " OFED/rdma-core version or firmware configuration");
> > > #endif
> > > if (mlx5_glue->query_device_ex(attr_ctx, NULL, &device_attr)) {
> > > err = errno;
> > > @@ -749,6 +763,7 @@ mlx5_pci_probe(struct rte_pci_driver *pci_drv
> > __rte_unused,
> > > .cqe_comp = cqe_comp,
> > > .mps = mps,
> > > .tunnel_en = tunnel_en,
> > > + .mpls_en = mpls_en,
> > > .tx_vec_en = 1,
> > > .rx_vec_en = 1,
> > > .mpw_hdr_dseg = 0,
> > > diff --git a/drivers/net/mlx5/mlx5.h b/drivers/net/mlx5/mlx5.h index
> > > 6e4613fe0..efbcb2156 100644
> > > --- a/drivers/net/mlx5/mlx5.h
> > > +++ b/drivers/net/mlx5/mlx5.h
> > > @@ -81,6 +81,7 @@ struct mlx5_dev_config {
> > > unsigned int vf:1; /* This is a VF. */
> > > unsigned int mps:2; /* Multi-packet send supported mode. */
> > > unsigned int tunnel_en:1;
> > > + unsigned int mpls_en:1; /* MPLS over GRE/UDP is enabled. */
> > > /* Whether tunnel stateless offloads are supported. */
> > > unsigned int flow_counter_en:1; /* Whether flow counter is supported.
> > */
> > > unsigned int cqe_comp:1; /* CQE compression is enabled. */ diff
> > > --git a/drivers/net/mlx5/mlx5_flow.c b/drivers/net/mlx5/mlx5_flow.c
> > > index 0fccd39b3..98edf1882 100644
> > > --- a/drivers/net/mlx5/mlx5_flow.c
> > > +++ b/drivers/net/mlx5/mlx5_flow.c
> > > @@ -100,6 +100,11 @@ mlx5_flow_create_gre(const struct rte_flow_item
> > *item,
> > > const void *default_mask,
> > > struct mlx5_flow_data *data);
> > >
> > > +static int
> > > +mlx5_flow_create_mpls(const struct rte_flow_item *item,
> > > + const void *default_mask,
> > > + struct mlx5_flow_data *data);
> > > +
> > > struct mlx5_flow_parse;
> > >
> > > static void
> > > @@ -247,12 +252,14 @@ struct rte_flow { #define IS_TUNNEL(type) ( \
> > > (type) == RTE_FLOW_ITEM_TYPE_VXLAN || \
> > > (type) == RTE_FLOW_ITEM_TYPE_VXLAN_GPE || \
> > > + (type) == RTE_FLOW_ITEM_TYPE_MPLS || \
> > > (type) == RTE_FLOW_ITEM_TYPE_GRE)
> > >
> > > const uint32_t flow_ptype[] = {
> > > [RTE_FLOW_ITEM_TYPE_VXLAN] = RTE_PTYPE_TUNNEL_VXLAN,
> > > [RTE_FLOW_ITEM_TYPE_VXLAN_GPE] = RTE_PTYPE_TUNNEL_VXLAN_GPE,
> > > [RTE_FLOW_ITEM_TYPE_GRE] = RTE_PTYPE_TUNNEL_GRE,
> > > + [RTE_FLOW_ITEM_TYPE_MPLS] = RTE_PTYPE_TUNNEL_MPLS_IN_GRE,
> > > };
> > >
> > > #define PTYPE_IDX(t) ((RTE_PTYPE_TUNNEL_MASK & (t)) >> 12) @@ -263,6
> > > +270,10 @@ const uint32_t ptype_ext[] = {
> > > [PTYPE_IDX(RTE_PTYPE_TUNNEL_VXLAN_GPE)] =
> > RTE_PTYPE_TUNNEL_VXLAN_GPE |
> > > RTE_PTYPE_L4_UDP,
> > > [PTYPE_IDX(RTE_PTYPE_TUNNEL_GRE)] = RTE_PTYPE_TUNNEL_GRE,
> > > + [PTYPE_IDX(RTE_PTYPE_TUNNEL_MPLS_IN_GRE)] =
> > > + RTE_PTYPE_TUNNEL_MPLS_IN_GRE,
> > > + [PTYPE_IDX(RTE_PTYPE_TUNNEL_MPLS_IN_UDP)] =
> > > + RTE_PTYPE_TUNNEL_MPLS_IN_GRE | RTE_PTYPE_L4_UDP,
> > > };
> > >
> > > /** Structure to generate a simple graph of layers supported by the
> > > NIC. */ @@ -399,7 +410,8 @@ static const struct mlx5_flow_items
> > mlx5_flow_items[] = {
> > > },
> > > [RTE_FLOW_ITEM_TYPE_UDP] = {
> > > .items = ITEMS(RTE_FLOW_ITEM_TYPE_VXLAN,
> > > - RTE_FLOW_ITEM_TYPE_VXLAN_GPE),
> > > + RTE_FLOW_ITEM_TYPE_VXLAN_GPE,
> > > + RTE_FLOW_ITEM_TYPE_MPLS),
> > > .actions = valid_actions,
> > > .mask = &(const struct rte_flow_item_udp){
> > > .hdr = {
> > > @@ -428,7 +440,8 @@ static const struct mlx5_flow_items mlx5_flow_items[]
> > = {
> > > [RTE_FLOW_ITEM_TYPE_GRE] = {
> > > .items = ITEMS(RTE_FLOW_ITEM_TYPE_ETH,
> > > RTE_FLOW_ITEM_TYPE_IPV4,
> > > - RTE_FLOW_ITEM_TYPE_IPV6),
> > > + RTE_FLOW_ITEM_TYPE_IPV6,
> > > + RTE_FLOW_ITEM_TYPE_MPLS),
> > > .actions = valid_actions,
> > > .mask = &(const struct rte_flow_item_gre){
> > > .protocol = -1,
> > > @@ -436,7 +449,11 @@ static const struct mlx5_flow_items
> > mlx5_flow_items[] = {
> > > .default_mask = &rte_flow_item_gre_mask,
> > > .mask_sz = sizeof(struct rte_flow_item_gre),
> > > .convert = mlx5_flow_create_gre,
> > > +#ifdef HAVE_IBV_DEVICE_MPLS_SUPPORT
> > > + .dst_sz = sizeof(struct ibv_flow_spec_gre), #else
> > > .dst_sz = sizeof(struct ibv_flow_spec_tunnel),
> > > +#endif
> > > },
> > > [RTE_FLOW_ITEM_TYPE_VXLAN] = {
> > > .items = ITEMS(RTE_FLOW_ITEM_TYPE_ETH, @@ -464,6 +481,21 @@
> > static
> > > const struct mlx5_flow_items mlx5_flow_items[] = {
> > > .convert = mlx5_flow_create_vxlan_gpe,
> > > .dst_sz = sizeof(struct ibv_flow_spec_tunnel),
> > > },
> > > + [RTE_FLOW_ITEM_TYPE_MPLS] = {
> > > + .items = ITEMS(RTE_FLOW_ITEM_TYPE_ETH,
> > > + RTE_FLOW_ITEM_TYPE_IPV4,
> > > + RTE_FLOW_ITEM_TYPE_IPV6),
> > > + .actions = valid_actions,
> > > + .mask = &(const struct rte_flow_item_mpls){
> > > + .label_tc_s = "\xff\xff\xf0",
> > > + },
> > > + .default_mask = &rte_flow_item_mpls_mask,
> > > + .mask_sz = sizeof(struct rte_flow_item_mpls),
> > > + .convert = mlx5_flow_create_mpls,
> > > +#ifdef HAVE_IBV_DEVICE_MPLS_SUPPORT
> > > + .dst_sz = sizeof(struct ibv_flow_spec_mpls), #endif
> > > + },
> >
> > Why the whole item is not under ifdef?
>
> If apply macro to whole item, there will be a null pointer if create mpls
> flow.
> There is a macro in function mlx5_flow_create_mpls() to avoid using this
> invalid data.
I think there is some kind of confusion here, what I mean is moving the
#ifdef to embrace the whole stuff i.e.:
#ifdef HAVE_IBV_DEVICE_MPLS_SUPPORT
[RTE_FLOW_ITEM_TYPE_MPLS] = {
.items = ITEMS(RTE_FLOW_ITEM_TYPE_ETH,
RTE_FLOW_ITEM_TYPE_IPV4,
RTE_FLOW_ITEM_TYPE_IPV6),
.actions = valid_actions,
.mask = &(const struct rte_flow_item_mpls){
.label_tc_s = "\xff\xff\xf0",
},
.default_mask = &rte_flow_item_mpls_mask,
.mask_sz = sizeof(struct rte_flow_item_mpls),
.convert = mlx5_flow_create_mpls,
.dst_sz = sizeof(struct ibv_flow_spec_mpls)
#endif
Not having this item in this static array ends by not supporting it,
this is what I mean.
> > > };
> > >
> > > /** Structure to pass to the conversion function. */ @@ -912,7 +944,9
> > > @@ mlx5_flow_convert_items_validate(struct rte_eth_dev *dev,
> > > if (ret)
> > > goto exit_item_not_supported;
> > > if (IS_TUNNEL(items->type)) {
> > > - if (parser->tunnel) {
> > > + if (parser->tunnel &&
> > > + !(parser->tunnel == RTE_PTYPE_TUNNEL_GRE &&
> > > + items->type == RTE_FLOW_ITEM_TYPE_MPLS)) {
> > > rte_flow_error_set(error, ENOTSUP,
> > > RTE_FLOW_ERROR_TYPE_ITEM,
> > > items,
> > > @@ -920,6 +954,16 @@ mlx5_flow_convert_items_validate(struct rte_eth_dev
> > *dev,
> > > " tunnel encapsulations.");
> > > return -rte_errno;
> > > }
> > > + if (items->type == RTE_FLOW_ITEM_TYPE_MPLS &&
> > > + !priv->config.mpls_en) {
> > > + rte_flow_error_set(error, ENOTSUP,
> > > + RTE_FLOW_ERROR_TYPE_ITEM,
> > > + items,
> > > + "MPLS not supported or"
> > > + " disabled in firmware"
> > > + " configuration.");
> > > + return -rte_errno;
> > > + }
> > > if (!priv->config.tunnel_en &&
> > > parser->rss_conf.level) {
> > > rte_flow_error_set(error, ENOTSUP, @@ -1880,6
> > +1924,80 @@
> > > mlx5_flow_create_vxlan_gpe(const struct rte_flow_item *item, }
> > >
> > > /**
> > > + * Convert MPLS item to Verbs specification.
> > > + * Tunnel types currently supported are MPLS-in-GRE and MPLS-in-UDP.
> > > + *
> > > + * @param item[in]
> > > + * Item specification.
> > > + * @param default_mask[in]
> > > + * Default bit-masks to use when item->mask is not provided.
> > > + * @param data[in, out]
> > > + * User structure.
> > > + *
> > > + * @return
> > > + * 0 on success, a negative errno value otherwise and rte_errno is
> > set.
> > > + */
> > > +static int
> > > +mlx5_flow_create_mpls(const struct rte_flow_item *item __rte_unused,
> > > + const void *default_mask __rte_unused,
> > > + struct mlx5_flow_data *data __rte_unused) { #ifndef
> > > +HAVE_IBV_DEVICE_MPLS_SUPPORT
> > > + return rte_flow_error_set(data->error, EINVAL,
> >
> > ENOTSUP is more accurate to keep a consistency among the errors.
> >
> > > + RTE_FLOW_ERROR_TYPE_ITEM,
> > > + item,
> > > + "MPLS not supported by driver"); #else
> > > + unsigned int i;
> > > + const struct rte_flow_item_mpls *spec = item->spec;
> > > + const struct rte_flow_item_mpls *mask = item->mask;
> > > + struct mlx5_flow_parse *parser = data->parser;
> > > + unsigned int size = sizeof(struct ibv_flow_spec_mpls);
> > > + struct ibv_flow_spec_mpls mpls = {
> > > + .type = IBV_FLOW_SPEC_MPLS,
> > > + .size = size,
> > > + };
> > > + union tag {
> > > + uint32_t tag;
> > > + uint8_t label[4];
> > > + } id;
> > > +
> > > + id.tag = 0;
> > > + parser->inner = IBV_FLOW_SPEC_INNER;
> > > + if (parser->layer == HASH_RXQ_UDPV4 ||
> > > + parser->layer == HASH_RXQ_UDPV6) {
> > > + parser->tunnel =
> > > + ptype_ext[PTYPE_IDX(RTE_PTYPE_TUNNEL_MPLS_IN_UDP)];
> > > + parser->out_layer = parser->layer;
> > > + } else {
> > > + parser->tunnel =
> > > + ptype_ext[PTYPE_IDX(RTE_PTYPE_TUNNEL_MPLS_IN_GRE)];
> > > + }
> > > + parser->layer = HASH_RXQ_TUNNEL;
> > > + if (spec) {
> > > + if (!mask)
> > > + mask = default_mask;
> > > + memcpy(&id.label[1], spec->label_tc_s, 3);
> > > + id.label[0] = spec->ttl;
> > > + mpls.val.tag = id.tag;
> > > + memcpy(&id.label[1], mask->label_tc_s, 3);
> > > + id.label[0] = mask->ttl;
> > > + mpls.mask.tag = id.tag;
> > > + /* Remove unwanted bits from values. */
> > > + mpls.val.tag &= mpls.mask.tag;
> > > + }
> > > + mlx5_flow_create_copy(parser, &mpls, size);
> > > + for (i = 0; i != hash_rxq_init_n; ++i) {
> > > + if (!parser->queue[i].ibv_attr)
> > > + continue;
> > > + parser->queue[i].ibv_attr->flags |=
> > > + IBV_FLOW_ATTR_FLAGS_ORDERED_SPEC_LIST;
> > > + }
> > > + return 0;
> > > +#endif
> > > +}
> > > +
> > > +/**
> > > * Convert GRE item to Verbs specification.
> > > *
> > > * @param item[in]
> > > @@ -1898,16 +2016,40 @@ mlx5_flow_create_gre(const struct rte_flow_item
> > *item __rte_unused,
> > > struct mlx5_flow_data *data)
> > > {
> > > struct mlx5_flow_parse *parser = data->parser;
> > > +#ifndef HAVE_IBV_DEVICE_MPLS_SUPPORT
> > > unsigned int size = sizeof(struct ibv_flow_spec_tunnel);
> > > struct ibv_flow_spec_tunnel tunnel = {
> > > .type = parser->inner | IBV_FLOW_SPEC_VXLAN_TUNNEL,
> > > .size = size,
> > > };
> > > +#else
> > > + const struct rte_flow_item_gre *spec = item->spec;
> > > + const struct rte_flow_item_gre *mask = item->mask;
> > > + unsigned int size = sizeof(struct ibv_flow_spec_gre);
> > > + struct ibv_flow_spec_gre tunnel = {
> > > + .type = parser->inner | IBV_FLOW_SPEC_GRE,
> > > + .size = size,
> > > + };
> > > +#endif
> > >
> > > parser->inner = IBV_FLOW_SPEC_INNER;
> > > parser->tunnel = ptype_ext[PTYPE_IDX(RTE_PTYPE_TUNNEL_GRE)];
> > > parser->out_layer = parser->layer;
> > > parser->layer = HASH_RXQ_TUNNEL;
> > > +#ifdef HAVE_IBV_DEVICE_MPLS_SUPPORT
> > > + if (spec) {
> > > + if (!mask)
> > > + mask = default_mask;
> > > + tunnel.val.c_ks_res0_ver = spec->c_rsvd0_ver;
> > > + tunnel.val.protocol = spec->protocol;
> > > + tunnel.val.c_ks_res0_ver = mask->c_rsvd0_ver;
> > > + tunnel.val.protocol = mask->protocol;
> > > + /* Remove unwanted bits from values. */
> > > + tunnel.val.c_ks_res0_ver &= tunnel.mask.c_ks_res0_ver;
> > > + tunnel.val.protocol &= tunnel.mask.protocol;
> > > + tunnel.val.key &= tunnel.mask.key;
> > > + }
> > > +#endif
> > > mlx5_flow_create_copy(parser, &tunnel, size);
> > > return 0;
> > > }
> > > --
> > > 2.13.3
> > >
> >
> > Thanks,
> >
> > --
> > Nélio Laranjeiro
> > 6WIND
--
Nélio Laranjeiro
6WIND
