Hi Juhan, thanks I am working through your notes now. Note that the docker-compose step generates a warning: 'WARNING: Some services (activemq, cassandra, eureka) use the 'deploy' key, which will be ignored. Compose does not support 'deploy' configuration - use `docker stack deploy` to deploy to a swarm."
But this did not stop the deployment because I can see the services: sudo netstat -tulpn | grep '5432\|9042\|8761\|8161' tcp6 0 0 :::5432 :::* LISTEN 15226/docker-proxy tcp6 0 0 :::8761 :::* LISTEN 15347/docker-proxy tcp6 0 0 :::8161 :::* LISTEN 15255/docker-proxy tcp6 0 0 :::9042 :::* LISTEN 15294/docker-proxy Where do you guys raise issues? I have just joined the community so I would like to do the right thing. Best Gerald On Thu, 19 Dec 2019 at 14:02, Juhan Aasaru <[email protected]> wrote: > Hi! > > it would be helpful if someone else would take time and try to set up the > bare minimum according to > the instructions I wrote: > > https://cwiki.apache.org/confluence/display/FINERACT/Bare+minimum+to+run+Fineract-CN+locally > This is the bare minimum so it shouldn't take much time to follow the > steps. > This way we would get instructions that are tested and polished. > And we would have more people who could support in the mailing list. > > Regarding logs of Rohit - I created a paste in pastebin for them: > https://pastebin.com/7rfpdqpY > Rohit and anyone else - use that service instead of attachments. > > Juhan > > Kontakt Awasum Yannick (<[email protected]>) kirjutas kuupäeval N, 19. > detsember 2019 kell 13:51: > >> A call is really needed to unblock Rohit. Juhan or Courage, Will you be >> able to arrange something? >> >> Why is Fineract CN getting difficult to build? I thought there was a time >> when everything worked fine. the build process..etc. Is it that the >> knowledge is not documented or the architecture is just too complex? >> >> What is the bottle neck here? >> >> On Thu, Dec 19, 2019 at 12:03 AM Courage Angeh <[email protected]> >> wrote: >> >>> Can you try to send it to just me? >>> >>> On Wed, Dec 18, 2019 at 6:01 PM Rohit Jain <[email protected]> wrote: >>> >>>> >>>> >>>> >>>> >>>> *From:* Rohit Jain >>>> *Sent:* Tuesday, December 17, 2019 11:32 AM >>>> *To:* [email protected] >>>> *Subject:* RE: help jump starting? >>>> >>>> >>>> >>>> When I ran into a dead end with the errors after following the build >>>> recommendations >>>> https://cwiki.apache.org/confluence/display/FINERACT/How+To+Build+Apache+Fineract+CN >>>> that >>>> no one could help resolve, Juhan recommended his recipe >>>> https://cwiki.apache.org/confluence/display/FINERACT/Bare+minimum+to+run+Fineract-CN+locally. >>>> I followed that and have run into another roadblock. Hope someone can >>>> help me with this, since I have not been able to get a working set of >>>> Finearact, in order to proceed to the next step. Or perhaps suggest yet >>>> another alternative. >>>> >>>> >>>> >>>> Thanks! >>>> >>>> Rohit >>>> >>>> >>>> >>>> *From:* Juhan Aasaru <[email protected]> >>>> *Sent:* Thursday, December 12, 2019 1:57 AM >>>> *To:* Dev <[email protected]> >>>> *Cc:* Ebenezer Graham <[email protected]> >>>> *Subject:* Re: help jump starting? >>>> >>>> >>>> >>>> Hi! >>>> >>>> I cannot help you with the error you got but instead I will propose a >>>> better solution. >>>> >>>> Right now you have been trying to set up Fineract-CN using demo server >>>> which is more >>>> >>>> suitable to demonstrate the solution. This doesn't help you much with >>>> getting started with developmentent >>>> >>>> as you cannot run individual micro services directly from your IDE. >>>> >>>> >>>> >>>> Instead I wrote a new tutorial how to set up bare minimum of >>>> Fineract-CN: >>>> >>>> >>>> https://cwiki.apache.org/confluence/display/FINERACT/Bare+minimum+to+run+Fineract-CN+locally >>>> >>>> This only sets up Provisioner and Identity micro services >>>> >>>> but you should get them running with your IDE (I use IntelliJ) so you >>>> can jump into development >>>> >>>> and maybe compose a proof-of-concept with only these two micro services. >>>> >>>> >>>> >>>> It is possible to add other micro services step-by-step afterwards but >>>> my instructions don't cover that. >>>> >>>> In the end of the tutorial I also propose starting up Fims Web App (UI >>>> of fineract-cn) but >>>> >>>> currently I didn't manage to do complete it myself. >>>> >>>> >>>> >>>> Anyway I propose to test my instructions as you should get up to speed >>>> quickly. >>>> >>>> Anyone else is welcome to give feedback as well (or fix directly in >>>> Confluence). >>>> >>>> >>>> >>>> Kind regards >>>> >>>> Juhan >>>> >>>> >>>> >>>> >>>> >>>> Kontakt Rohit Jain (<[email protected]>) kirjutas kuupäeval K, 11. >>>> detsember 2019 kell 19:31: >>>> >>>> Hi guys, >>>> >>>> >>>> >>>> I am stuck. Any pointers? Advice on a different approach? >>>> >>>> >>>> >>>> Rohit >>>> >>>> >>>> >>>> *From:* Rohit Jain >>>> *Sent:* Monday, December 9, 2019 1:11 PM >>>> *To:* [email protected] >>>> *Cc:* Ebenezer Graham <[email protected]> >>>> *Subject:* RE: help jump starting? >>>> >>>> >>>> >>>> That is what I thought. I think it was the size of the log: ezmlm-reject: >>>> fatal: Sorry, I don't accept messages larger than 1000000 bytes (#5.2.3) >>>> >>>> >>>> >>>> I have attached a zipped version. >>>> >>>> >>>> >>>> *From:* Awasum Yannick <[email protected]> >>>> *Sent:* Monday, December 9, 2019 1:03 PM >>>> *To:* Dev <[email protected]> >>>> *Cc:* Ebenezer Graham <[email protected]> >>>> *Subject:* Re: help jump starting? >>>> >>>> >>>> >>>> >>>> >>>> On Mon, Dec 9, 2019 at 6:32 PM Rohit Jain <[email protected]> wrote: >>>> >>>> This message got rejected because I had an attached log file. I am >>>> resending it without the log file. If there is a way to share the log >>>> file, let me know. … >>>> >>>> >>>> >>>> >>>> >>>> This list supports attachments. I dont know why you are having >>>> problems. Just paste the Logs in the body of the email. >>>> >>>> >>>> >>>> Hi guys, >>>> >>>> >>>> >>>> I appreciate your guidance. However, let me share some considerations >>>> and perhaps you can guide me better: >>>> >>>> - My focus is to see if we can demonstrate Fineract working with >>>> Apache Trafodion instead of PostgreSQL + Cassandra. Initially the focus >>>> will be to switch PostgreSQL with Trafodion using the EclipseLink/JPA >>>> infrastructure that has been put in place. >>>> - To that end I am not interested in exploring all the intricate >>>> details of the components or tools used by Fineract, since that would >>>> take >>>> me a lot of time and effort with little value, when you experts are >>>> already >>>> taking care of that part. That is, I have no idea what npm does or >>>> why. I >>>> am just following the directions on the build web page so I can get it >>>> running with PostgreSQL + Cassandra, then see how I can switch Fineract >>>> to >>>> use Trafodion, and then run the same with Trafodion to hopefully get the >>>> same results. >>>> - I am doing this on a Windows 10 Pro OS x64 PC Intel i7-6500U 2.50 >>>> GHz CPU, 2592 MHz, 2 Core(s), 4 Logical Processor(s) with 16 GB of >>>> physical >>>> memory and total virtual memory of 35 GB with around 22.5 GB available. >>>> If >>>> I need to start the process again on some other system/OS I can, but >>>> from >>>> what I have been told so far, it should work on this laptop. >>>> - I ignored putting the *fineract-cn-fims-web-app* directory in a >>>> *integration-tests* directory since in the past the host directory >>>> path has been irrelevant for most purposes. But I guess I was wrong in >>>> this case. So, I changed that and built Fineract CN again successfully, >>>> i.e. completed Step 2 recommended option 1. But when I ran Step 3 >>>> Option B >>>> – with persistence Command I, I am still getting errors. I don’t have >>>> the >>>> log from the beginning (my bad) but have most of the relevant parts of >>>> the >>>> log attached, if that gives any pointers as to what the issue may be. >>>> - If I should follow a different recipe to do what I need to do in >>>> order to move forward, I am more than willing. I don’t know if a docker >>>> build is what will work for what I want to do, since my intent is not to >>>> just demo / use the product, but rather to get it running with tests as >>>> it >>>> currently stands and then switch to Trafodion with whatever effort that >>>> requires (potentially source or configuration changes), and then run the >>>> tests again to prove that it all works just the same. Later I would >>>> like >>>> to run some performance tests at scale to demonstrate where Trafodion >>>> can >>>> really make a difference for Fineract customers needing >>>> high-scalability. >>>> But I need to get it all working first. >>>> >>>> >>>> >>>> So, any guidance would greatly be appreciated. Thanks for your >>>> patience and all your help! >>>> >>>> Rohit >>>> >>>> >>>> >>>> *From:* Awasum Yannick <[email protected]> >>>> *Sent:* Friday, December 6, 2019 2:18 AM >>>> *To:* Dev <[email protected]> >>>> *Cc:* Rohit Jain <[email protected]>; Ebenezer Graham < >>>> [email protected]> >>>> *Subject:* Re: help jump starting? >>>> >>>> >>>> >>>> Hi Juhan, >>>> >>>> >>>> >>>> I think you are right and it is time to rewrite the build instructions >>>> for Fineract CN to adopt the Docker approach. Anyone interested in doing >>>> this work? >>>> >>>> >>>> >>>> On Fri, Dec 6, 2019 at 7:50 AM Juhan Aasaru <[email protected]> wrote: >>>> >>>> Hi! >>>> >>>> The problem with npm is caused by the fact that you have not cd into >>>> correct directory. >>>> >>>> The instructions under step #4 have this: cd into >>>> ‘integration-tests/fineract-cn-fims-web-app' >>>> >>>> >>>> >>>> Anyway, we can all agree that the build instructions of Fineract-CN are >>>> almost impossible to properly follow. >>>> >>>> And actually there is no need to use demo server. Demo server sets up >>>> the system but >>>> >>>> its quite untransparent and difficult to understand for a newcomer. >>>> Don't get me wrong, it >>>> >>>> is a great resource afterwards when learning how to call micro services >>>> from code and >>>> >>>> how to use listeners. >>>> >>>> >>>> >>>> To set up the system for the first time I recommend to use >>>> Docker-Compose with Postman instead: >>>> >>>> >>>> https://github.com/apache/fineract-cn-docker-compose#2-deploy-fineract-manually-using-postman >>>> >>>> This is all tested several times and should work like a charm. >>>> >>>> >>>> >>>> The following is an idea of mine that is not anywhere documented yet >>>> due to lack of time. >>>> >>>> Based on Docker-Compose process we could also create instructions where >>>> micro services are not >>>> >>>> started within Docker but they are started directly (run from IDE or >>>> java -jar ...). >>>> >>>> >>>> >>>> Docker-Compose instructions include creating .env file with common >>>> properties (and RSA keys). >>>> >>>> To run micro services directly basically a similar file should be >>>> created, let's call it applciation-locally.yml >>>> >>>> and then when starting apps this file should be passed as flag: >>>> >>>> --spring.config.location=../application-locally.yml >>>> >>>> >>>> >>>> Provisioning is be done with Postman (see instructions at >>>> fineract-cn-docker-compose) >>>> >>>> - this way one understands better what steps are taking place during >>>> provisioning. >>>> >>>> >>>> >>>> Kind regards >>>> >>>> Juhan >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> Kontakt Awasum Yannick (<[email protected]>) kirjutas kuupäeval >>>> R, 6. detsember 2019 kell 04:35: >>>> >>>> Why are you running npm (x) on a non node, non js repo (demo-server) ? >>>> >>>> >>>> >>>> The timeout might be showing a lack of memory problem. What is the >>>> capacity of your machine? >>>> >>>> >>>> >>>> On Thu, Dec 5, 2019 at 9:40 PM Rohit Jain <[email protected]> wrote: >>>> >>>> Thanks guys! >>>> >>>> >>>> >>>> I think I got off the track right at the beginning of *Step 3: >>>> Orchestrate Microservices Using The Demo-server*. It said “… >>>> *consider* manually orchestrating …”. I thought I *needed to* go to >>>> https://github.com/vishwasbabu/ProvisioningFineractCN. That is where >>>> it says start ActiveMQ. Which is why I did. I abandoned that effort when >>>> I realized that “consider” meant optional, and I did not really need to do >>>> that, since that whole key generation was getting a bit complicated on >>>> Windows 10. But then ActiveMQ was still running when I proceeded with the >>>> rest of the instructions to build. My bad! >>>> >>>> Because I had started ActiveMQ, initially demo-server immediately >>>> complained about not being able to use port 61616. In fact, the >>>> instructions say that this port should not be in use before starting >>>> demo-server. I guess I did not pay attention to that part until I got that >>>> error. I then stopped ActiveMQ, changed the port 61616 it was using, to >>>> 61615, and restarted it (doh!). Demo-server then ran for a long time. But >>>> then it gave me a slew of *connection refused* errors for port 61616, >>>> even though ActiveMQ was not using it, and *not that the port was >>>> being used*. >>>> >>>> >>>> >>>> Regardless, I stopped ActiveMQ and this time ran with Command II in the >>>> documentation. I did not run into the connection refused error! >>>> >>>> This time I got some [DicoverClient-*n*] errors that >>>> c.n.discovery.TimedSupervisorTask >>>> – task supervisor timed out >>>> >>>> >>>> >>>> But demo-server kept going after those timeouts and has now been >>>> running for 3 hours with no message "INFO >>>> o.e.jetty.server.AbstractConnector - >>>> StoppedServerConnector@1bdb0376{HTTP/1.1,[http/1.1]}" written to any >>>> of the logs as yet. I guess I should have direct standard out to a log >>>> since it does not seem to be capturing everything in the logs and I might >>>> have just missed that message. >>>> >>>> >>>> >>>> I decided to proceed to step 4 but I get the following when I run npm i >>>> … >>>> >>>> c:\Apps\fineract-cn-demo-server>npm i >>>> >>>> npm WARN saveError ENOENT: no such file or directory, open >>>> 'c:\Apps\fineract-cn-demo-server\package.json' >>>> >>>> npm notice created a lockfile as package-lock.json. You should commit >>>> this file. >>>> >>>> npm WARN enoent ENOENT: no such file or directory, open >>>> 'c:\Apps\fineract-cn-demo-server\package.json' >>>> >>>> npm WARN fineract-cn-demo-server No description >>>> >>>> npm WARN fineract-cn-demo-server No repository field. >>>> >>>> npm WARN fineract-cn-demo-server No README data >>>> >>>> npm WARN fineract-cn-demo-server No license field. >>>> >>>> >>>> >>>> up to date in 0.843s >>>> >>>> found 0 vulnerabilities >>>> >>>> >>>> >>>> c:\Apps\fineract-cn-demo-server>npm run dev >>>> >>>> npm ERR! code ENOENT >>>> >>>> npm ERR! syscall open >>>> >>>> npm ERR! path c:\Apps\fineract-cn-demo-server\package.json >>>> >>>> npm ERR! errno -4058 >>>> >>>> npm ERR! enoent ENOENT: no such file or directory, open >>>> 'c:\Apps\fineract-cn-demo-server\package.json' >>>> >>>> npm ERR! enoent This is related to npm not being able to find a file. >>>> >>>> npm ERR! enoent >>>> >>>> >>>> >>>> There us a package-lock.json but no package.json. >>>> >>>> >>>> >>>> *From:* Ebenezer Graham <[email protected]> >>>> *Sent:* Thursday, December 5, 2019 7:39 AM >>>> *To:* Awasum Yannick <[email protected]> >>>> *Cc:* [email protected]; Ebenezer Graham < >>>> [email protected]> >>>> *Subject:* Re: help jump starting? >>>> >>>> >>>> >>>> Thanks Awasum for the response. I think that's the issue too >>>> >>>> >>>> >>>> @Rohit, it's not necessary to configure a standalone ActiveMQ when >>>> running the demo-server. This library ( >>>> https://github.com/apache/fineract-cn-command) helps to set up an >>>> embedded broker. >>>> >>>> >>>> >>>> Also, what is the state of this issue >>>> https://github.com/flyway/flyway/issues/2103 >>>> >>>> >>>> >>>> Warm regards. >>>> >>>> >>>> >>>> On Thu, Dec 5, 2019 at 11:07 AM Awasum Yannick <[email protected]> >>>> wrote: >>>> >>>> Hi >>>> >>>> >>>> >>>> Demo server at times runs with an embedded activemq and other data >>>> stores. So if you already have an activemq installed on your host, then >>>> thats what is causing the port in use exception. >>>> >>>> >>>> >>>> Hope this helps. >>>> >>>> >>>> >>>> On Wed, Dec 4, 2019, 23:06 Rohit Jain <[email protected]> wrote: >>>> >>>> Hi Ebenezer, >>>> >>>> >>>> >>>> A thread by the same subject line was initiated by my colleague, Eric >>>> Owhadi, on 06 Jun, 20:51. He ran into an issue: >>>> >>>> Could not connect to broker URL: tcp://localhost:61616. Reason: >>>> java.net.ConnectException: Connection refused >>>> >>>> >>>> >>>> It so happens that 4 months later I have run into the exact same >>>> issue. Except that I am running everything on my Windows 10 laptop. Also, >>>> I installed and ran ActiveMQ on my laptop. In fact, the demo server got an >>>> error initially since it found that port 61616 was being used. So, I >>>> modified the activemq.xml file to change that port to avoid the conflict. >>>> Then the demo server started all the application services, and then at the >>>> end ran into the error above. >>>> >>>> >>>> >>>> You responded to Eric and said that you would provide a resolution to >>>> this problem. Don’t know if you have a resolution that I can use to move >>>> forward. The Demo server created the appropriate databases and keyspaces >>>> in PostgreSQL and Cassandra respectively. >>>> >>>> >>>> >>>> Rohit >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> -- >>>> >>>> *Best Regards,* >>>> >>>> *Ebenezer Graham* >>>> >>>> *BSc (Hons) Computing* >>>> >>>> >>>> >>>> >>>> >>>> GitHub <https://ebenezergraham.me> | LinkedIn >>>> <https://www.linkedin.com/in/ebenezer-graham/> | Personal Website >>>> <https://ebenezergraham.me> >>>> >>>> skype: >>>> >>>> ebenezer.graham >>>> >>>> | Phone: >>>> >>>> +230 5840 9206 <+230%205840%209206> >>>> >>>> >>>> >>>> *“Talk is cheap, show me the Code” *- *Linus Torvalds* >>>> >>>> -- Gerald O'Sullivan Cellphone: 082-412-9962
