Hi Greg,
those are mostly generated sources from the compiler. I could start adding rat exceptions for all of them, but I don't think thats the way to go. I think it would be best practice to do a clean-all/mega-clean/wipe-all with Ant prior to building with maven (whatever goal actually cleans up everything). Otherwise we'll be stuck adding exceptions for quite some time. Chris ________________________________ Von: Greg Dove <greg.d...@gmail.com> Gesendet: Mittwoch, 27. Juli 2016 21:55:39 An: dev@flex.apache.org Betreff: Re: AW: [FLEXJS, TYPEDEFS] Lastly Chris, after running through the maven build steps, I then built using 'ant all' inside flex-asjs (which completed fine), then started to follow the maven build sequence again after that. Compiler and typedefs seemed fine, but I got a face-full of rat on the framework build. I added: <exclude>templates/swfobject/swfobject.js</exclude> which let me proceed to the next step. Then I hit 1134 Unknown Licenses, and that was a little too ambitious for me to try to figure out right now. I've uploaded this rat file (frameworks/target/rat.txt) to dropbox here [1]. Let me know if I can help with any other checks. cheers Greg 1. https://www.dropbox.com/s/yc515urn6s11gy2/rat.txt?dl=0 On Thu, Jul 28, 2016 at 6:04 AM, Greg Dove <greg.d...@gmail.com> wrote: > Hi Chris, > > I wasn't suggesting to remove the rat support, I can see for sure how that > would be useful, I just didn't know how (yet) I needed to address the > issues I had. > > I just followed the instructions on a fresh setup and the build completed > fine for the 3 main parts. > > I did see this in the compiler build: > > [INFO] --- compiler-build-tools:1.0.0-SNAPSHOT:add-class-annotation > (add-suppress-rawtypes-unchecked-unused-warnings-annotations) @ compiler --- > Adding @SuppressWarnings({"rawtypes", "unchecked", "unused"}) to class: > D:\FLEXSDKS\_dev_maven2\flex-falcon\compiler\target\generated-sources\jburg\org\apache\flex\compiler\internal\as\codegen\CmcEmitter.java > org.apache.flex.compiler.tools.annotate.AnnotateClass$AnnotateClassDeleteException: > Error deleting original file at: > D:\FLEXSDKS\_dev_maven2\flex-falcon\compiler\target\generated-sources\jburg\org\apache\flex\compiler\internal\as\codegen\CmcEmitter.java > at > org.apache.flex.compiler.tools.annotate.AnnotateClass.processFile(AnnotateClass.java:99) > at > org.apache.flex.compiler.tools.annotate.AnnotateClassesMojo.execute(AnnotateClassesMojo.java:64) > at > org.apache.maven.plugin.DefaultBuildPluginManager.executeMojo(DefaultBuildPluginManager.java:134) > at > org.apache.maven.lifecycle.internal.MojoExecutor.execute(MojoExecutor.java:207) > at > org.apache.maven.lifecycle.internal.MojoExecutor.execute(MojoExecutor.java:153) > at > org.apache.maven.lifecycle.internal.MojoExecutor.execute(MojoExecutor.java:145) > > > I don't know if it is important. > > > Also, when I got to the final step I have set the distributionTargetFolder > variable to a valid location but the build did not put anything in that > folder (although it otherwise completed normally). I was running this > build-distribution command from inside flex-asjs. If it is sufficient to > simply define the location as instructed, and run the same > build-distribution step again, then that part does not seem to be working > for me. > > This is on Windows 10, in case that is important also. > > -Greg > > > > > > On Wed, Jul 27, 2016 at 6:38 PM, Christofer Dutz < > christofer.d...@c-ware.de> wrote: > >> >> Hi Greg, >> >> >> I'm happy that you like the build so far :-) >> >> >> Justin and I am currently finishing up a 2 hour video tutorial on Maven, >> which I hope we will be able to publish soon. I guess that should get rid >> of this black-box-magic feeling you might be encountering at the moment ;-) >> >> >> And hanks for the ... I think that usually RAT automatically excludes IDE >> settings files for modules that are part of the build. But I guess this >> could be an issue if the files are located in a directory that's not a >> Maven module (All these duplicate XyzJS modules needed to make Eclipse >> happy). The reason why RAT is complaining only about the 4 License files in >> the lib dir is that RAT doesn't require binary files to have a header and >> those are the only not-binary files without headers. I guess I'll just >> exclude the lib directory in all modules. >> >> >> I would like to keep the plugin in the build, cause when I added it to >> the build it reported about 10 files without headers. The check only takes >> a fraction of a second on my machine and it does make things safer from an >> Apache point of view. I could however add it to the release profile, but >> then we would start encountering problems as soon as I would build a >> release candidate, which would be unfortunate. So could you guys please >> report the full relative paths of stuff RAT is complaining about after >> using Ant and I would take care of adding exclusions. >> >> >> Chris >> >> ________________________________ >> Von: Greg Dove <greg.d...@gmail.com> >> Gesendet: Mittwoch, 27. Juli 2016 07:29:28 >> An: dev@flex.apache.org >> Betreff: Re: AW: [FLEXJS, TYPEDEFS] >> >> Chris, I also encountered similar issues with the frameworks build, and >> started adding extra <excludes> tags for the rat {insert maven-esque word >> for "task"/plugin here} to ignore things like intellij files and swfobject >> etc in flex-asjs pom.xml >> >> <exclude>**/*.iml</exclude> >> <exclude>**/.idea/**</exclude> >> >> But I found it easier in the end to delete that whole "plugin" from the >> pom.xml as a quick approach for now and the build completed flawlessly. >> I like the experience so far, I just haven't gotten my head fully around >> it >> yet. >> I will try this from a clean slate tomorrow -following the instructions >> exactly - instead of trying to do it within the current setup I have, >> where >> I have used ant builds previously or have extra IDE files.. >> >> >> >> >> On Wed, Jul 27, 2016 at 11:22 AM, Greg Dove <greg.d...@gmail.com> wrote: >> >> > I just finally got around to trying this as well and encountered the >> same >> > issue, and yes, I have used ant previously as well, otherwise it is >> looking >> > very good - I especially like the sound of the distributionTargetFolder >> > option :) >> > >> > The rat report shows the following for me: >> > >> > 3 Unknown Licenses >> > >> > ***************************************************** >> > >> > Files with unapproved licenses: >> > >> > D:/FLEXSDKS/dev/flex-falcon/compiler/lib/external/antlr-LICENSE.html >> > D:/FLEXSDKS/dev/flex-falcon/compiler/lib/external/jflex-COPYRIGHT >> > >> D:/FLEXSDKS/dev/flex-falcon/compiler/lib/external/lzma-sdk-LICENSE.html >> > >> > ... (I assume the rest is ok) >> > >> > On Wed, Jul 27, 2016 at 7:52 AM, Christofer Dutz < >> > christofer.d...@c-ware.de> wrote: >> > >> >> I guess if you had run the Ant build before, there might be some files >> >> generated in places I didn't anticipate. So the RAT plugin is >> complaining >> >> about these files not having Apache Headers in them ... usually the >> >> target/rat.txt file will contain a list of the violating files. >> >> >> >> >> >> Chris >> >> >> >> ________________________________ >> >> Von: Peter Ent <p...@adobe.com> >> >> Gesendet: Dienstag, 26. Juli 2016 17:40:58 >> >> An: dev@flex.apache.org >> >> Betreff: Re: AW: [FLEXJS, TYPEDEFS] >> >> >> >> Hi, >> >> >> >> I just finished installing and running maven. I was able to build >> >> flex-falcon "utils" but when I went to build the compiler, it failed on >> >> the rat report check (below). But I think it would have worked nicely >> >> otherwise. Great job! >> >> >> >> [INFO] Rat check: Summary over all files. Unapproved: 18, unknown: 18, >> >> generated: 0, approved: 2005 licenses. >> >> [INFO] >> >> >> ------------------------------------------------------------------------ >> >> [INFO] Reactor Summary: >> >> [INFO] >> >> [INFO] Apache Flex - FlexJS: Compiler: Parent ............. SUCCESS [ >> >> 2.541 s] >> >> [INFO] Apache Flex - FlexJS: Compiler: Test Utils ......... SUCCESS [ >> >> 1.554 s] >> >> [INFO] Apache Flex - FlexJS: Compiler: Compiler ........... FAILURE [ >> >> 26.918 s] >> >> [INFO] Apache Flex - FlexJS: Compiler: Compiler-JX ........ SKIPPED >> >> [INFO] Apache Flex - FlexJS: Compiler: Debugger ........... SKIPPED >> >> [INFO] Apache Flex - FlexJS: Compiler: OEM Layer .......... SKIPPED >> >> [INFO] Apache Flex - FlexJS: FlexJS Ant Tasks ............. SKIPPED >> >> [INFO] Apache Flex - FlexJS: FlexJS Maven Plugin .......... SKIPPED >> >> [INFO] >> >> >> ------------------------------------------------------------------------ >> >> [INFO] BUILD FAILURE >> >> [INFO] >> >> >> ------------------------------------------------------------------------ >> >> [INFO] Total time: 31.259 s >> >> [INFO] Finished at: 2016-07-26T11:35:14-04:00 >> >> [INFO] Final Memory: 52M/1114M >> >> [INFO] >> >> >> ------------------------------------------------------------------------ >> >> [ERROR] Failed to execute goal >> org.apache.rat:apache-rat-plugin:0.12:check >> >> (license-check) on project compiler: Too many files with unapproved >> >> license: 18 See RAT report in: >> >> /Users/pent/dev/flex-falcon/compiler/target/rat.txt -> [Help 1] >> >> >> >> >> >> >> >> On 7/26/16, 2:19 AM, "Christofer Dutz" <christofer.d...@c-ware.de> >> wrote: >> >> >> >> >By the way ... did you give the Maven build a try? >> >> > >> >> > >> >> >Chris >> >> > >> >> >________________________________ >> >> >Von: Peter Ent <p...@adobe.com> >> >> >Gesendet: Montag, 25. Juli 2016 20:05:49 >> >> >An: Alex Harui; dev@flex.apache.org >> >> >Betreff: Re: [FLEXJS, TYPEDEFS] >> >> > >> >> >Got this to work with help from Alex. I had FALCONJX_HOME pointing to >> an >> >> >old directory: flex-falcon/compiler.jx; it should have been pointing >> to >> >> >flex-falcon/compiler-jx >> >> > >> >> >—peter >> >> > >> >> >From: Alex Harui <aha...@adobe.com<mailto:aha...@adobe.com>> >> >> >Date: Monday, July 25, 2016 at 11:42 AM >> >> >To: Peter Ent <p...@adobe.com<mailto:p...@adobe.com>>, >> >> >"dev@flex.apache.org<mailto:dev@flex.apache.org>" >> >> ><dev@flex.apache.org<mailto:dev@flex.apache.org>> >> >> >Subject: Re: [FLEXJS, TYPEDEFS] >> >> > >> >> >Try ant all in falcon again. >> >> > >> >> >Sent from my LG G3, an AT&T 4G LTE smartphone >> >> > >> >> >------ Original message------ >> >> >From: Peter Ent >> >> >Date: Mon, Jul 25, 2016 7:56 AM >> >> >To: dev@flex.apache.org<mailto:dev@flex.apache.org>; >> >> >Subject:Re: [FLEXJS, TYPEDEFS] >> >> > >> >> >Running ant in flex-typedefs/jquery does not give the error and builds >> >> >successfully. I do not have FLEX_FALCON environment var set at all. >> >> >—peter >> >> > >> >> >On 7/25/16, 10:51 AM, "Alex Harui" >> >> ><aha...@adobe.com<mailto:aha...@adobe.com>> wrote: >> >> > >> >> >>Go to flex-typedefs/jquery and run 'ant'. Do you get the same >> errors? >> >> >>If >> >> >>so, do you have a FLEX_FALCON environment variable pointing somewhere >> >> >>other than flex-falcon? >> >> >> >> >> >>-Alex >> >> >> >> >> >>On 7/25/16, 7:34 AM, "Peter Ent" <p...@adobe.com<mailto: >> p...@adobe.com >> >> >> >> >> >>wrote: >> >> >> >> >> >>>Yes, I had done that as well. So this time I did: >> >> >>> >> >> >>>typedefs: ant wipe >> >> >>>falcon: ant wipe-all; ant all >> >> >>> >> >> >>>Get same errors below. >> >> >>> >> >> >>>On 7/25/16, 10:27 AM, "Alex Harui" >> >> >>><aha...@adobe.com<mailto:aha...@adobe.com>> wrote: >> >> >>> >> >> >>>>Did you also do a "wipe" in flex-typedefs? IIRC, that was the repo >> >> >>>>that >> >> >>>>was on the wrong branch and could have left cruft. >> >> >>>> >> >> >>>>-Alex >> >> >>>> >> >> >>>>On 7/25/16, 7:23 AM, "Peter Ent" >> >> >>>><p...@adobe.com<mailto:p...@adobe.com>> wrote: >> >> >>>> >> >> >>>>>So back to this. >> >> >>>>> >> >> >>>>>This morning I did a new pull from flex-falcon/typedefs/asjs just >> to >> >> >>>>>be >> >> >>>>>certain, I think a couple of new things came down. >> >> >>>>> >> >> >>>>>I did ant wipe-all in falcon followed by ant all. I get this >> error at >> >> >>>>>the >> >> >>>>>end of the build (below). Is falcon supposed to be built first? >> I'm >> >> >>>>>assuming typedefs needs the compiler since I saw it using compc >> (at >> >> >>>>>least). And why is the flex-falcon build getting stuff for >> >> >>>>>flex-typedefs >> >> >>>>>(see download: part of the console log, below)? This is why I'm >> >> >>>>>wondering >> >> >>>>>if flex-typedefs get built first - shouldn't it be getting the >> stuff >> >> >>>>>in >> >> >>>>>its own directories? >> >> >>>>> >> >> >>>>>‹peter >> >> >>>>> >> >> >>>>>download: >> >> >>>>> [get] Getting: >> >> >>>>> >> >> https://raw.githubusercontent.com/google/closure-compiler/master/contr >> >> >>>>>i >> >> >>>>>b >> >> >>>>>/ >> >> >>>>>e >> >> >>>>>x >> >> >>>>>terns/jquery-1.9.js >> >> >>>>> [get] To: >> >> >> >>>>>/Users/pent/dev/flex-typedefs/jquery/target/downloads/jquery-1.9.js >> >> >>>>> >> >> >>>>> >> >> >>>>>preprocess: >> >> >>>>> >> >> >>>>> >> >> >>>>>externc: >> >> >>>>> [java] event parameters not found! 0 >> >> >>>>> [java] fx parameters not found! 0 >> >> >>>>> [java] 0.950329 seconds >> >> >>>>> [java] Java Result: 255 >> >> >>>>> >> >> >>>>> >> >> >>>>>postprocess: >> >> >>>>> >> >> >>>>> >> >> >>>>>compc: >> >> >>>>> [java] Loading configuration: >> >> >>>>>/Users/pent/dev/flex-typedefs/jquery/target/compile-as-config.xml >> >> >>>>> [java] >> >> >>>>> [java] >> >> >> >> >> >>>>>/Users/pent/dev/flex-typedefs/jquery/target/generated-sources/externc/ >> >> >>>>>c >> >> >>>>>o >> >> >>>>>n >> >> >>>>>s >> >> >>>>>t >> >> >>>>>ants/$.as:3 >> >> >>>>> [java] Warning: Incompatible initializer value of type 'int' >> >> >>>>>where >> >> >>>>>'jQuery' is expected. An initial value of null will be used >> instead. >> >> >>>>> [java] public const $:jQuery = undefined; >> >> >>>>> [java] ^ >> >> >>>>> [java] >> >> >>>>> [java] >> >> >> >> >> >>>>>/Users/pent/dev/flex-typedefs/jquery/target/generated-sources/externc/ >> >> >>>>>i >> >> >>>>>n >> >> >>>>>t >> >> >>>>>e >> >> >>>>>r >> >> >>>>>faces/jQueryAjaxSettingsExtra.as:20 >> >> >>>>> [java] Error: A conflict exists with definition processData >> in >> >> >>>>>namespace public. >> >> >>>>> [java] function get processData():Boolean; >> >> >>>>> [java] ^ >> >> >>>>> [java] >> >> >>>>> [java] >> >> >> >> >> >>>>>/Users/pent/dev/flex-typedefs/jquery/target/generated-sources/externc/ >> >> >>>>>i >> >> >>>>>n >> >> >>>>>t >> >> >>>>>e >> >> >>>>>r >> >> >>>>>faces/jQueryAjaxSettingsExtra.as:20 >> >> >>>>> [java] Error: Cannot override an interface method. Method >> >> >>>>>processData conflicts with a method in base interface >> >> >>>>>jQueryAjaxSettings. >> >> >>>>> [java] function get processData():Boolean; >> >> >>>>> [java] ^ >> >> >>>>> [java] >> >> >>>>> [java] >> >> >> >> >> >>>>>/Users/pent/dev/flex-typedefs/jquery/target/generated-sources/externc/ >> >> >>>>>i >> >> >>>>>n >> >> >>>>>t >> >> >>>>>e >> >> >>>>>r >> >> >>>>>faces/jQueryAjaxSettingsExtra.as:20 >> >> >>>>> [java] Error: Cannot override an interface method. Method >> >> >>>>>processData conflicts with a method in base interface >> >> >>>>>jQueryAjaxSettings. >> >> >>>>> [java] function get processData():Boolean; >> >> >>>>> [java] ^ >> >> >>>>> [java] >> >> >>>>> [java] >> >> >> >> >> >>>>>/Users/pent/dev/flex-typedefs/jquery/target/generated-sources/externc/ >> >> >>>>>i >> >> >>>>>n >> >> >>>>>t >> >> >>>>>e >> >> >>>>>r >> >> >>>>>faces/jQueryAjaxSettingsExtra.as:21 >> >> >>>>> [java] Error: A conflict exists with definition processData >> in >> >> >>>>>namespace public. >> >> >>>>> [java] function set processData(value:Boolean):void; >> >> >>>>> [java] ^ >> >> >>>>> [java] >> >> >>>>> [java] >> >> >> >> >> >>>>>/Users/pent/dev/flex-typedefs/jquery/target/generated-sources/externc/ >> >> >>>>>i >> >> >>>>>n >> >> >>>>>t >> >> >>>>>e >> >> >>>>>r >> >> >>>>>faces/jQueryAjaxSettingsExtra.as:21 >> >> >>>>> [java] Error: Cannot override an interface method. Method >> >> >>>>>processData conflicts with a method in base interface >> >> >>>>>jQueryAjaxSettings. >> >> >>>>> [java] function set processData(value:Boolean):void; >> >> >>>>> [java] ^ >> >> >>>>> [java] >> >> >>>>> [java] >> >> >> >> >> >>>>>/Users/pent/dev/flex-typedefs/jquery/target/generated-sources/externc/ >> >> >>>>>i >> >> >>>>>n >> >> >>>>>t >> >> >>>>>e >> >> >>>>>r >> >> >>>>>faces/jQueryAjaxSettingsExtra.as:21 >> >> >>>>> [java] Error: Cannot override an interface method. Method >> >> >>>>>processData conflicts with a method in base interface >> >> >>>>>jQueryAjaxSettings. >> >> >>>>> [java] function set processData(value:Boolean):void; >> >> >>>>> [java] ^ >> >> >>>>> [java] >> >> >>>>> >> >> >>>>> >> >> >>>>>BUILD FAILED >> >> >>>>>/Users/pent/dev/flex-falcon/build.xml:140: The following error >> >> >>>>>occurred >> >> >>>>>while executing this line: >> >> >>>>>/Users/pent/dev/flex-typedefs/build.xml:57: The following error >> >> >>>>>occurred >> >> >>>>>while executing this line: >> >> >>>>>/Users/pent/dev/flex-typedefs/jquery/build.xml:140: Java >> returned: 2 >> >> >>>>> >> >> >>>>> >> >> >>>>> >> >> >>>>>On 7/22/16, 11:20 PM, "Alex Harui" >> >> >>>>><aha...@adobe.com<mailto:aha...@adobe.com>> wrote: >> >> >>>>> >> >> >>>>>>I just did ant wipe-all and ant all in Falcon and it worked for >> me. >> >> >>>>>> >> >> >>>>>>Did you run 'ant wipe' in flex-typedefs after switching to the >> >> >>>>>>develop >> >> >>>>>>branch? Since that was the repo that was on the wrong branch it >> >> >>>>>>might >> >> >>>>>>have some cruft in it that is messing up the flex-falcon build. >> >> >>>>>> >> >> >>>>>>-Alex >> >> >>>>>> >> >> >>>>>>On 7/22/16, 1:33 PM, "Peter Ent" >> >> >>>>>><p...@adobe.com<mailto:p...@adobe.com>> wrote: >> >> >>>>>> >> >> >>>>>>>No joy. I did switch to develop branch of flex-typedefs. >> >> >>>>>>> >> >> >>>>>>>I sync'd with Falcon and did an ant all; that failed so I did a >> ant >> >> >>>>>>>wipe-all and then ant all. That fails: >> >> >>>>>>> >> >> >>>>>>>download: >> >> >>>>>>> [get] Getting: >> >> >>>>>>> >> >> https://raw.githubusercontent.com/google/closure-compiler/master/con >> >> >>>>>>>t >> >> >>>>>>>r >> >> >>>>>>>i >> >> >>>>>>>b >> >> >>>>>>>/ >> >> >>>>>>>e >> >> >>>>>>>x >> >> >>>>>>>terns/jquery-1.9.js >> >> >>>>>>> [get] To: >> >> >> >>>>>>>/Users/pent/dev/flex-typedefs/jquery/target/downloads/jquery-1.9.js >> >> >>>>>>> >> >> >>>>>>> >> >> >>>>>>>preprocess: >> >> >>>>>>> >> >> >>>>>>> >> >> >>>>>>>externc: >> >> >>>>>>> [java] event parameters not found! 0 >> >> >>>>>>> [java] fx parameters not found! 0 >> >> >>>>>>> [java] 0.902557 seconds >> >> >>>>>>> [java] Java Result: 255 >> >> >>>>>>> >> >> >>>>>>> >> >> >>>>>>>postprocess: >> >> >>>>>>> >> >> >>>>>>> >> >> >>>>>>>compc: >> >> >>>>>>> [java] Loading configuration: >> >> >> >>>>>>>/Users/pent/dev/flex-typedefs/jquery/target/compile-as-config.xml >> >> >>>>>>> [java] >> >> >>>>>>> [java] >> >> >> >> >> >>>>>>>/Users/pent/dev/flex-typedefs/jquery/target/generated-sources/extern >> >> >>>>>>>c >> >> >>>>>>>/ >> >> >>>>>>>c >> >> >>>>>>>o >> >> >>>>>>>n >> >> >>>>>>>s >> >> >>>>>>>t >> >> >>>>>>>ants/$.as:3 >> >> >>>>>>> [java] Warning: Incompatible initializer value of type >> 'int' >> >> >>>>>>>where >> >> >>>>>>>'jQuery' is expected. An initial value of null will be used >> >> instead. >> >> >>>>>>> [java] public const $:jQuery = undefined; >> >> >>>>>>> [java] ^ >> >> >>>>>>> [java] >> >> >>>>>>> [java] >> >> >> >> >> >>>>>>>/Users/pent/dev/flex-typedefs/jquery/target/generated-sources/extern >> >> >>>>>>>c >> >> >>>>>>>/ >> >> >>>>>>>i >> >> >>>>>>>n >> >> >>>>>>>t >> >> >>>>>>>e >> >> >>>>>>>r >> >> >>>>>>>faces/jQueryAjaxSettingsExtra.as:20 >> >> >>>>>>> [java] Error: A conflict exists with definition >> processData in >> >> >>>>>>>namespace public. >> >> >>>>>>> [java] function get processData():Boolean; >> >> >>>>>>> [java] ^ >> >> >>>>>>> [java] >> >> >>>>>>> [java] >> >> >> >> >> >>>>>>>/Users/pent/dev/flex-typedefs/jquery/target/generated-sources/extern >> >> >>>>>>>c >> >> >>>>>>>/ >> >> >>>>>>>i >> >> >>>>>>>n >> >> >>>>>>>t >> >> >>>>>>>e >> >> >>>>>>>r >> >> >>>>>>>faces/jQueryAjaxSettingsExtra.as:20 >> >> >>>>>>> [java] Error: Cannot override an interface method. Method >> >> >>>>>>>processData conflicts with a method in base interface >> >> >>>>>>>jQueryAjaxSettings. >> >> >>>>>>> [java] function get processData():Boolean; >> >> >>>>>>> [java] ^ >> >> >>>>>>> [java] >> >> >>>>>>> [java] >> >> >> >> >> >>>>>>>/Users/pent/dev/flex-typedefs/jquery/target/generated-sources/extern >> >> >>>>>>>c >> >> >>>>>>>/ >> >> >>>>>>>i >> >> >>>>>>>n >> >> >>>>>>>t >> >> >>>>>>>e >> >> >>>>>>>r >> >> >>>>>>>faces/jQueryAjaxSettingsExtra.as:20 >> >> >>>>>>> [java] Error: Cannot override an interface method. Method >> >> >>>>>>>processData conflicts with a method in base interface >> >> >>>>>>>jQueryAjaxSettings. >> >> >>>>>>> [java] function get processData():Boolean; >> >> >>>>>>> [java] ^ >> >> >>>>>>> [java] >> >> >>>>>>> [java] >> >> >> >> >> >>>>>>>/Users/pent/dev/flex-typedefs/jquery/target/generated-sources/extern >> >> >>>>>>>c >> >> >>>>>>>/ >> >> >>>>>>>i >> >> >>>>>>>n >> >> >>>>>>>t >> >> >>>>>>>e >> >> >>>>>>>r >> >> >>>>>>>faces/jQueryAjaxSettingsExtra.as:21 >> >> >>>>>>> [java] Error: A conflict exists with definition >> processData in >> >> >>>>>>>namespace public. >> >> >>>>>>> [java] function set processData(value:Boolean):void; >> >> >>>>>>> [java] ^ >> >> >>>>>>> [java] >> >> >>>>>>> [java] >> >> >> >> >> >>>>>>>/Users/pent/dev/flex-typedefs/jquery/target/generated-sources/extern >> >> >>>>>>>c >> >> >>>>>>>/ >> >> >>>>>>>i >> >> >>>>>>>n >> >> >>>>>>>t >> >> >>>>>>>e >> >> >>>>>>>r >> >> >>>>>>>faces/jQueryAjaxSettingsExtra.as:21 >> >> >>>>>>> [java] Error: Cannot override an interface method. Method >> >> >>>>>>>processData conflicts with a method in base interface >> >> >>>>>>>jQueryAjaxSettings. >> >> >>>>>>> [java] function set processData(value:Boolean):void; >> >> >>>>>>> [java] ^ >> >> >>>>>>> [java] >> >> >>>>>>> [java] >> >> >> >> >> >>>>>>>/Users/pent/dev/flex-typedefs/jquery/target/generated-sources/extern >> >> >>>>>>>c >> >> >>>>>>>/ >> >> >>>>>>>i >> >> >>>>>>>n >> >> >>>>>>>t >> >> >>>>>>>e >> >> >>>>>>>r >> >> >>>>>>>faces/jQueryAjaxSettingsExtra.as:21 >> >> >>>>>>> [java] Error: Cannot override an interface method. Method >> >> >>>>>>>processData conflicts with a method in base interface >> >> >>>>>>>jQueryAjaxSettings. >> >> >>>>>>> [java] function set processData(value:Boolean):void; >> >> >>>>>>> [java] ^ >> >> >>>>>>> [java] >> >> >>>>>>> >> >> >>>>>>> >> >> >>>>>>>BUILD FAILED >> >> >>>>>>>/Users/pent/dev/flex-falcon/build.xml:140: The following error >> >> >>>>>>>occurred >> >> >>>>>>>while executing this line: >> >> >>>>>>>/Users/pent/dev/flex-typedefs/build.xml:57: The following error >> >> >>>>>>>occurred >> >> >>>>>>>while executing this line: >> >> >>>>>>>/Users/pent/dev/flex-typedefs/jquery/build.xml:140: Java >> returned: >> >> 2 >> >> >>>>>>> >> >> >>>>>>> >> >> >>>>>>>Total time: 1 minute 47 seconds >> >> >>>>>>>pent-osx:flex-falcon pent$ >> >> >>>>>>> >> >> >>>>>>> >> >> >>>>>>> >> >> >>>>>>> >> >> >>>>>>>On 7/22/16, 3:44 PM, "Alex Harui" >> >> >>>>>>><aha...@adobe.com<mailto:aha...@adobe.com>> wrote: >> >> >>>>>>> >> >> >>>>>>>>Did you switch to the develop branch in flex-typedefs? If you >> >> used >> >> >>>>>>>>the >> >> >>>>>>>>standard folder naming and structure, the scripts should find >> it. >> >> >>>>>>>>You >> >> >>>>>>>>may >> >> >>>>>>>>need to sync and build flex-falcon first. >> >> >>>>>>>> >> >> >>>>>>>>-Alex >> >> >>>>>>>> >> >> >>>>>>>>On 7/22/16, 12:13 PM, "Peter Ent" >> >> >>>>>>>><p...@adobe.com<mailto:p...@adobe.com>> wrote: >> >> >>>>>>>> >> >> >>>>>>>>>Just sync'd flex-asjs repo. Must have missed the email about >> it >> >> >>>>>>>>>now >> >> >>>>>>>>>requiring flex-typedefs. Cloned that and tried to build it >> using >> >> >>>>>>>>>ant: >> >> >>>>>>>>> >> >> >>>>>>>>> >> >> >>>>>>>>>/Users/pent/dev/flex-typedefs/build.xml:52: The following >> error >> >> >>>>>>>>>occurred >> >> >>>>>>>>>while executing this line: >> >> >>>>>>>>> >> >> >>>>>>>>>/Users/pent/dev/flex-typedefs/js/build.xml:29: src >> >> >> >> >> >>>>>>>>>'/Users/pent/dev/compiler-jx/lib/google/closure-compiler/compiler. >> >> >>>>>>>>>j >> >> >>>>>>>>>a >> >> >>>>>>>>>r >> >> >>>>>>>>>' >> >> >>>>>>>>>doesn't exist. >> >> >>>>>>>>> >> >> >>>>>>>>> >> >> >>>>>>>>>I don't see any README or instructions in the flex-typedefs >> repo. >> >> >>>>>>>>>What >> >> >>>>>>>>>ENV vars are required to build it? I did a quick search >> through >> >> >>>>>>>>>past >> >> >>>>>>>>>emails and while I found a number of git-related items and >> some >> >> >>>>>>>>>discussion about it, I didn't see anything that provided some >> >> >>>>>>>>>insight. >> >> >>>>>>>>> >> >> >>>>>>>>> >> >> >>>>>>>>>Thanks, >> >> >>>>>>>>> >> >> >>>>>>>>>Peter >> >> >>>>>>>> >> >> >>>>>>> >> >> >>>>>> >> >> >>>>> >> >> >>>> >> >> >>> >> >> >> >> >> > >> >> >> >> >> > >> > >
