Hello,
Reading a blog Eike Rathke gave me the URL, it was mentionned
feedback can be sent there.
Thus, I'd like to inform you the Presenter Screen works nicely on Mac
OS X Aqua, in the following cases :
- Milestones used for tests : DEV300_m29 , DEV300_m30
- Operating Systems and architecture tested :
Intel / Mac OS X 10.4 and PowerPC / Mac OS X 10.4 and 10.5
Untested case : Intel / Mac OS X 10.5.x (but nobody reported any
issue, so ;) )
In every tested case, the extensions (built in the above milestones)
install fine, and work. Last, I recently added the Apple Remote
support to the Aqua version, and it works fine too with the presenter
screen. All features together look very promising :)
The only (little) issues I found were :
1) sometimes, when going out of the presentation mode, there is no
way to switch from normal mode, to whatever other mode like note ..
using the tabs. Looks like the events are lost, or some dead lock or
something strange. But no crash so far.
Might be usefull: a second extension was installed ( presenter-
minimizer), and deintall both and reinstall only the presenter screen
solved this strange issue.
2) Before to start the presentation, you need to select monitor 2 in
the Diaporama properties, else you'll see what the public should see,
and the public will see your notes :-)
That's all for me, and I present my sincere congratulations to the
authors of this killer feature, who will give a very profesionnal
look/design to the Impress application.
Thanks again, and keep on the good work !
Regards
Eric Bachard
--
qɔᴉɹə
